Trakasti ukrivljeni transporter, trakasta krivina 60° desno

Transnorm 500 IR600 / TS 1500-100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, dolžina gredi pod glavo: 30 mm, dolžina odseka (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Year of manufacture: 1970 Guedpfx Aaour N Das Usc The machine is immediately ready for operation!

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW Gusdeuz If Njpfx Aa Uec - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, SACMA SP22 PROGRESIVNI HLADNI TISKALNI STROJ 2 MATRICI 2 PREBITNIKA Popolnoma obnovljen - Kot nov (v skladu s CE standardi) S nameščenim poldelnim perforiranim sklopom PRODUKCIJSKI RAZPON: Premer: 10x100 Tip stroja: Premikalna glava z 2 matricama – 2 udarca Razpon premerov: 10 mm Število matric: 2 Število postaj (vključno z odrezovanjem): 3 Dolžina reza: 110 mm Dolžina osi pod glavo: 100 mm Zmogljivost – kosov/min: 170 Guodpfx Aaspgw Ugo Usc

Stanje: novo, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Extraction port Ø: 100 mm Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Gujdpfx Aed Rw Rhea Uoc Length: 1080 mm Width: 520 mm Height: 1000 mm Approx. weight: 85 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: 220287, NS60E Nakashimada dvotlačni stiskalnica, letnik 2022, kot nova, dolžina odrezka 95 mm, premer žične palice 7 mm Gsdpfjwiwqxex Aa Usuc

Stanje: rabljeno, dolžina gredi pod glavo: 80 mm, dolžina navoja: 58 mm, Flat die thread rolling machines GW 63 / GW 63SX, various years of manufacture, good condition, top-notch electrics. EW Menn including vibratory feeder, Skako, chute conveyor. Godpfx Aaewkqvqj Ujuc

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system Godpfsyxccrex Aa Ujuc • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 707, Ingramatic thread rolling machine RP21 RV, year 1997, used Guedpfjwiu Afox Aa Uoc