Stroj za upogibanje cevi, CNC upogibni strojtransfluid Maschinenbau GmbH
DB 622-CNC-R/L
Stroj za upogibanje cevi, CNC upogibni stroj
transfluid Maschinenbau GmbH
DB 622-CNC-R/L
Leto izdelave
2025
Stanje
Novo
Lokacija
Schmallenberg 

Prikaži slike
Prikaži karto
Podatki o stroju
- Opis stroja:
- Stroj za upogibanje cevi, CNC upogibni stroj
- Proizvajalec:
- transfluid Maschinenbau GmbH
- Model:
- DB 622-CNC-R/L
- Leto izdelave:
- 2025
- Stanje:
- novo
- funkcionalnost:
- popolnoma funkcionalen
Cena in lokacija
- Lokacija:
- Schmallenberg, Nemčija
Klic
Podrobnosti ponudbe
- ID ponudbe:
- A19444911
- Nazadnje posodobljeno:
- dne 16.07.2025
Opis
Pipe bending machine, CNC, bending machine, CNC bending machine, pipe bender, tube bending system, tube processing, pipe technology, right-left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine
Performance data:
- Round tubes steel S235: 22 x 2.0 mm Ø
- Round tubes stainless steel 1.4571: 22 x 1.5 mm Ø
- Max. section modulus: 0.5 cm³ (S235)
- Bending angle: up to 180° + 10° overbend
- Bending axis speed: max. 300°/sec
- Feed axis speed: max. 1800 mm/sec
- Rotation axis speed: max. 600°/sec
- Repeat accuracy bending axis: +/- 0.05°
- Repeat accuracy length: +/- 0.05 mm
- Repeat accuracy rotation: +/- 0.05°
- Tube loading length / usable length for mandrel bending on request
- Radius range: max. 66 mm
- Bending height: 1150 mm
- Thrust force for length positioning: 2.5 kN
- Bending axis drive: servo-electric
- Positioning of rotation and length: servo-electric
- Drive of auxiliary axes (e.g., clamping, mandrel in/out, etc.): servo-electric
- Positioning of bending heads: servo-electric
- Slide shoe adjustment (radial): servo-electric
- Slide shoe travelling (axial): servo-electric
- Material clamping (collet): pneumatic
Machine configuration / Basic equipment:
- Bending head for right/left bending in one clamping
- Bending head positionable horizontally and vertically, incl. rotation axis for head change (right or left bending)
- The bending head positioning is performed by a combined cross axis/rotation axis, enabling right/left bending in one clamping
- Bending direction is freely programmable and changeable right/left
- Each bending head comes standard with a maximum exchange height of 50 mm, enabling equipment with at least 2 tool sets depending on tube size, e.g., to use different radii or form jaws if required
- Maximum radius difference between each level 1.5xD
- With hollow shaft, allowing use of tools with small radii
- Minimal clamping length at tube end, as the counterholder opens wide, allowing the rotation unit to move directly behind the bending tool
-> A separate collet is required for each tube diameter
- Chuck for using segmented collets.
Depending on the contour of the clamping segments, preformed tube ends can also be clamped
- Material clamping in the rotation and feeding unit (VWE) pneumatic
- Foot switch for opening or closing the collet in the VWE, for easy loading and unloading
- Travelling counterholder for bends up to 180° (for radii up to max. 2xD, for larger bending radii the counterholder can be repositioned to ensure constant support up to 180° bending angle)
- Support for the mandrel bar and the tube along the entire length for accurate positioning
Dkedpfswvqgtex Ag Nou
- Mandrel can be automatically retracted during bending (programmable)
- Minimum quantity lubrication for automatic mandrel lubrication,
lubricant amount adjustable, usable from inner tube Ø 13.5 mm
- Central lubrication system to automatically lubricate all moving parts in the required cycle
- Air conditioning to cool the control cabinet
- Function triggering via hand switch on the control panel
- All functions can be operated via keyboard and mouse in manual operating mode
- The machine is constructed in accordance with the latest safety regulations.
To comply with CE regulations, an additional safety enclosure is required (DB-SA...)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Performance data:
- Round tubes steel S235: 22 x 2.0 mm Ø
- Round tubes stainless steel 1.4571: 22 x 1.5 mm Ø
- Max. section modulus: 0.5 cm³ (S235)
- Bending angle: up to 180° + 10° overbend
- Bending axis speed: max. 300°/sec
- Feed axis speed: max. 1800 mm/sec
- Rotation axis speed: max. 600°/sec
- Repeat accuracy bending axis: +/- 0.05°
- Repeat accuracy length: +/- 0.05 mm
- Repeat accuracy rotation: +/- 0.05°
- Tube loading length / usable length for mandrel bending on request
- Radius range: max. 66 mm
- Bending height: 1150 mm
- Thrust force for length positioning: 2.5 kN
- Bending axis drive: servo-electric
- Positioning of rotation and length: servo-electric
- Drive of auxiliary axes (e.g., clamping, mandrel in/out, etc.): servo-electric
- Positioning of bending heads: servo-electric
- Slide shoe adjustment (radial): servo-electric
- Slide shoe travelling (axial): servo-electric
- Material clamping (collet): pneumatic
Machine configuration / Basic equipment:
- Bending head for right/left bending in one clamping
- Bending head positionable horizontally and vertically, incl. rotation axis for head change (right or left bending)
- The bending head positioning is performed by a combined cross axis/rotation axis, enabling right/left bending in one clamping
- Bending direction is freely programmable and changeable right/left
- Each bending head comes standard with a maximum exchange height of 50 mm, enabling equipment with at least 2 tool sets depending on tube size, e.g., to use different radii or form jaws if required
- Maximum radius difference between each level 1.5xD
- With hollow shaft, allowing use of tools with small radii
- Minimal clamping length at tube end, as the counterholder opens wide, allowing the rotation unit to move directly behind the bending tool
-> A separate collet is required for each tube diameter
- Chuck for using segmented collets.
Depending on the contour of the clamping segments, preformed tube ends can also be clamped
- Material clamping in the rotation and feeding unit (VWE) pneumatic
- Foot switch for opening or closing the collet in the VWE, for easy loading and unloading
- Travelling counterholder for bends up to 180° (for radii up to max. 2xD, for larger bending radii the counterholder can be repositioned to ensure constant support up to 180° bending angle)
- Support for the mandrel bar and the tube along the entire length for accurate positioning
Dkedpfswvqgtex Ag Nou
- Mandrel can be automatically retracted during bending (programmable)
- Minimum quantity lubrication for automatic mandrel lubrication,
lubricant amount adjustable, usable from inner tube Ø 13.5 mm
- Central lubrication system to automatically lubricate all moving parts in the required cycle
- Air conditioning to cool the control cabinet
- Function triggering via hand switch on the control panel
- All functions can be operated via keyboard and mouse in manual operating mode
- The machine is constructed in accordance with the latest safety regulations.
To comply with CE regulations, an additional safety enclosure is required (DB-SA...)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Pošlji zahtevo
Telefon & Faks
+49 2972 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake