Namizni vrtalni stroj

TOS WHN 13 CNC

Leto izdelave: 1980, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 426, največja hitrost vretena: 2.500 obr/min, dolžina mize: 1.800 mm, obremenitev mize: 12.000 kg, širina mize: 1.800 mm, število osi: 4, This 4-axis CNC boring mill TOS WHN 13.8 was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a 50 ISO tool taper, and a spindle speed of 2500 rpm. The machine has a table load capacity of 12,000 kg and is equipped with SIEMENS motors and drives. If you are looking for a high-quality boring machine, you should consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Advantages Qualitative Advantages • Retrofitted in 2001 • Overhauled in 2024 • 6-month warranty on mechanical parts Iodpfx Aley Altho Njtf Technical Advantages • Working spindle diameter: 130 mm • Tool taper: 50 ISO Additional Information The machine is still connected to power / 6-month warranty on mechanical parts // Scope of overhaul (2024): ■ Cleaning of the machine ■ Inspection and adjustment of machine geometry ■ Regrinding of spindle taper ■ ...Option to replace the spindle at extra cost ■ Functionality check of the machine ■ Overhaul of electrical equipment ■ Overhaul of hydraulics and lubrication systems ■ Adjustment of clearances and optimization of drives ■ Replacement of guideway wipers ■ Repair of telescopic machine cover ■ Replacement of balancing cables ■ Platform repair ■ Overhaul of CHZ13 coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm Itodpjx D E Hbofx Al Nof • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 0718, 5-osno krmiljenje, pritrdilna miza velikosti cca 1800x1600 mm, krmiljenje HEIDENHAIN, industrijsko hlajenje SCHIMPKE DK28V, hidravlična enota, električna omara, naprava za pripravo hladilne tekočine BMT KMA 1500 800 1000, leto izdelave: 1995, dvovratna jeklena omara, razni dodatki, 1 vretenasta glava TA26. Itodpfjyzthwsx Al Nef

Stanje: dober (rabljeno), Leto izdelave: 2013, Ref. No.: 10636 Manufacturer: TOS VARNSDORF Model: WHN 13 CNC Year of manufacture: 2013 Control type: CNC CNC system: Heidenhain 530 Location: Halberstadt Country of origin: Czech Republic X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm W-axis: 800 mm B-axis: 360° Table load capacity: 15,000 kg Tool holder: SK 50 Rotational speed: 1,400 rpm Spindle speed: 2,000 rpm Additional information: - The control system was retrofitted in 2013 with a HEIDENHAIN 530i. Iedpjyqmvxjfx Al Netf - All drives have been replaced with digital units. The turret thrust bearing was also replaced in 2013. - Accessories: - 3D probe – Heidenhain, large spindle support - 1 x axis module Heidenhain (overhauled) - 1 new axis module installed in the machine - Newly packaged spare parts, machine covers - All bearings on the machine have been replaced in recent years - Tools and milling cutter heads available The machine comes from the original owner. It is still under power and in production. Inspection is possible by appointment.

Stanje: rabljeno, STC filmindpakningsmaskine, Maskine anvendt til pakning af champignon. Kapacitet: 40-80 pakker/min. Itedpfx Asc Nlxrsl Nef

Stanje: rabljeno, Leto izdelave: 1986, TOS - WHN 13.8B CNC - 1986/1995 - sistem Heidenhain TNC155 - 5 motorno gnanih osi - pomiki X/Y/Z/W=3500/2000/800/200 mm - miza 1600x1800 mm - nosilnost mize 4000 kg - premer vretena 130 mm Iodpfx Alsyl I Huo Njtf - največji vrtljaji vretena 800 o/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Heidenhain iTNC 640 CNC Control Table dimensions: 1800 x 2200 mm Maximum workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/taper diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Maximum torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Itsdow Hbnvepfx Al Njf Accessories: – Controlled B-axis – 40-position tool changer / chain magazine – Belt filtration system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head, type HUI 50 – Movable operator cabin (Yp = 1,600 mm, Zp = 600 mm) – Centralized lubrication unit – Pfannenberg oil cooler – Documentation

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 820 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, Oprema: transportni trak za ostružke, Splošno Krmilnik: Max 5 Letnik: 2023 Delovno območje Pomik X: 820 mm Pomik Y: 550 mm Pomik Z: 500 mm Pomik B: +110° / -110° Pomik C: 360° Menjalnik orodij: 60-kratni Hitri pomik X/Y/Z: 36 / 36 / 36 m/min Vreteno Število vrtljajev: 12.000 obr/min Moč: 16 kW Vpenjalni stožec: SK40 NC-rotacijska miza Miza – vpenjalna površina D x Š: 600 x 600 mm Razdalja vretena do mize: 150 – 650 mm Obremenitev mize: 350 kg Itsdpsyap Tfsfx Al Nef Oprema Transporter za odrezke Sistem za dovod hladilne tekočine Direktni merilni sistem Zrak skozi vreteno 5-osna simultana obdelava Merjenje obdelovanca Merjenje orodja Visokotlačno hlajenje (IKZ)

Stanje: dober (rabljeno), Leto izdelave: 2013, Ref. No.: 10484 Manufacturer: TOS VARNSDORF Model: WHN 13 CNC Year of manufacture: 2013 Control type: CNC Control system: HEIDENHAIN 530 Location: Halberstadt Country of origin: Czech Republic X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm W-axis: 800 mm B-axis: 360° Table load capacity: 15,000 kg Tool holder: SK 50 Rotational speed: 1,400 rpm Spindle speed: 2,000 rpm Additional information: The control system was retrofitted in 2013 to a HEIDENHAIN 530i. All drives were upgraded to digital. The tower thrust bearing was also replaced in 2013. Accessories: Ijdpfsw Iu Nhsx Al Nstf 3D probe – Heidenhain, large spindle support Auxiliary table dimensions: 3,850 x 900 mm 1x Heidenhain axis module (completely overhauled), 1 new axis module is installed in the machine. Newly packaged spare parts, machine guards. All bearings on the machine have been replaced in recent years. Tools and face milling heads are available. The machine is from first ownership. It remains powered on and in operation. The machine can be inspected by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 11.427 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 3.000 obr/min, model krmilnika: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal boring and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travels X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load capacity: 12 t Feed Itedpfxewc Ryaj Al Nef Working and rapid traverse speed: 10 m/min Cooling Internal coolant through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system on-time: 41,414 h Total machine runtime: 40,471 h Program runtime: 9,805 h Spindle runtime: 11,428 h Runtime at increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle coolant - Continuously rotating rotary table - No chip conveyor

Stanje: rabljeno, D-6886-Delford Type SP 800 Itedpec Nlxpjfx Al Nef Delford SP800, folieviklingsmaskine, emballeringsmateriale: strækfilm 12,5–25 mikron (50-100 gauge) PVC eller andre egnede varmeforseglbare folietyper. Maks. rullebredde: 450 mm, maks. rulle diameter: 250 mm. Arbejdshastighed: 40–80 pakker pr. minut. Maks. pakkestørrelser: L 300 mm, B 200 mm, H 120 mm, omkreds 420 mm. Min. pakkestørrelser: L 130 mm, B 90 mm, H 10 mm, omkreds 200 mm. Maskindimensioner: 5290 x 1049 x 1430 mm. Maskinvægt: ca. 1.400 kg.