Stroj za rezkanje

TOS Zebrák FNGJ 32

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle Nedpfx Aorz Nflog Toku - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Nkedpfx Ashrnbksg Tsu Weight: approx. 14 t Without control cabinet.

Stanje: novo, Parallel lathe with clutch and digital readout Fervi T085F10, featuring a mechanical clutch, 3-axis digital readout, and semi-Norton gearbox. Available with 2000 mm and 3000 mm center distances as well. EQUIPPED WITH MECHANICAL CLUTCH, 3-AXIS DIGITAL READOUT, AND SEMI-NORTON GEARBOX. FITTED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. BUILT ON A ONE-PIECE CAST IRON BASE. Technical data: - Center height: 280 mm - Max swing over bed: 560 mm - Max swing over carriage: 360 mm - Max swing in gap: 770 mm - Tool height: 32 mm - Distance between centers: 1000 mm - Spindle bore: 105 mm - Spindle mount: Camlock D1-8 - Spindle speeds (12): 36 - 1600 rpm Nkedpfx Agevbquis Tou - Longitudinal feeds: 0.063 - 2.52 mm/rev - Cross feeds: 0.027 - 1.07 mm/rev - Metric threads (22): 1 - 14 mm - Inch threads (26): 2 - 28 TPI - Tailstock taper: MT 5 - Motor: 400V 50/60 Hz, 7.5 kW - Coolant pump: 400V 50/60 Hz, 90 W - Dimensions: 2500 x 1400 x 1500 mm - Net weight: 2920 kg - Gross weight: 3555 kg Included accessories: - 3-jaw self-centering chuck Ø 320 mm with reversible jaws - 4-jaw independent chuck Ø 400 mm - Faceplate Ø 600 mm - Travelling steady - Fixed steady - MT 5 live center - Thread chasing dial - Leadscrew guard - Tool post guard - Spindle guard - Rear splash guard - Quick-change tool post type C - LED lamp - Coolant system - Electro-mechanical foot brake - Quick-locking tailstock carriage - Carriage gears in oil bath - Adjustable leveling feet

Stanje: rabljeno, Tornio Landonio TMU 1200 Nsdpfeizxvkox Ag Teku

Stanje: rabljeno, Leto izdelave: 1974, premer struženja nad ležiščem sani: 480 mm, širina na sredini: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical data Make: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1500 mm Swing diameter over bed: 480 mm Swing diameter over cross slide: 295 mm Spindle speed range: 20 – 2190 rpm Dimensions (LxWxH): 3.50 x 1.20 x 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250 mm, mounted Nkjdswm D Ilepfx Ag Tju - Faceplate D 400 mm - 10 quick-change tool holders - 1 steady rest All information without guarantee. A demonstration under power is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 300 mm,

Stanje: dober (rabljeno), Z digitalnim prikazom Z vrtalno in rezkalno glavo Njdpfxow Nnuto Ag Tjku Hodi 330 x 400 x 475 mm Vpenjalna površina mize 650 x 245 mm Vreteno ISO 40 Hitrosti vretena 63–2'800 vrt./min Različna dodatna oprema MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.000 h, največja hitrost vretena: 2.500 obr/min, skupna masa: 1.800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional lead-screw and feed shaft arrangement, stepless speed control, and a digital readout. Key specifications include a swing diameter of 400 mm, a center height of 195 mm, and a bed length of 1270 mm. The machine is also equipped with a MultiFix quick-change tool post, a maximum spindle speed of 2,500 rpm, and a motor power of 7.5 kW. The total weight is 1,800 kg. Contact us for more information about this machine. • Control: Conventional with lead screw and stepless speed adjustment Nkodsx D Nwdepfx Ag Tsu • Displays: Digital readout for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Swing diameter: 400 mm • Center height: 195 mm • Bed length: 1270 mm • Tool post: MultiFix quick-change tool post Additional equipment: • 3x three-jaw chucks • 3 sets of jaw inserts • Collet chuck key • Manual/operator’s handbook • Work area lamp • Digital dial gauge • 4 MultiFix tool holders • Various turning tools • Keyless drill chuck for tailstock • Coolant pump

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Nsdpfx Ajiy Dtbog Tjku Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition As is Immediately available

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Nsdpjwa I Shefx Ag Toku Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°