CNC stružnica švicarskega tipa

TORNOS GT 13

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2560460122, Tornos Swiss GT13/6 – Sliding Headstock Automatic Lathe CNC Control FANUC 31i-B, 6 axes, 13 mm capacity Base Machine Equipment: Njdpfxjyzigcj Agxocr - 6 linear axes - Independent main and sub-spindle - Synchronously rotating guide bush - Configuration for operation without guide bush - C-axis for main and sub-spindle - Adjustable pneumatic ejector, including sub-spindle cleaning with coolant - 3-color signal tower (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Interface for oil mist extraction - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor) Guide bush type: B (853) - Max. part length in one clamping: 180 mm - Conversion kit for work without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front carrier - Tool holder for 4 turning tools 12x12 mm on the rear side of the carrier - S11 live tool drive (10,000 rpm) for rotating tools mounted on the front of the X1/Y1 carrier - 1 drive module for cross machining with 3 spindles for ESX 16 collet (2x 10,000 rpm and 1x 6,250 rpm) - S21 live tool drive (6,000 rpm) for up to 2 driven units mounted on the rear side of the X1/Y1 carrier (driven units not included) - Tool holder with 4 bores Ø 22 mm for stationary secondary operation tools Sub-Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), Max. Ø capacity: 13 mm - C4 axis function Tool System for Back Operations: - Base holder for 8 rear tools; the 4 upper positions can accommodate rotating and/or stationary tools (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bore (for upper positions) - S51 live tool drive (6,000 rpm) for rear working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We offer you not only a high-quality product, but also tailored financing solutions to meet your individual needs. Whether a down payment, installment plan or custom financing model – together we’ll find the right solution. Upon request, we also handle the complete transport organization, from planning to reliable delivery, ensuring a smooth and punctual process so you don’t have to worry about a thing.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, Magazin za palice Robobar SBF-320 Zagon: 22.06.2012 Ure pod elektriko: ca. 40.000h Čas rezanja: 22.000h (stanje 02/2025) Število osi: 4 Število prečnih AGW: 3 kos (2 x ER11, 1 x ER16) Vrtljiva orodja: 5 kos, steblo 12x12 (od tega 3 obrnjena navzgor) Nosilec za čelno vrtanje: 4-kratni Njdjxph Hhjpfx Agxscr Vpenjalne klešče: 2 x tip E136 Vodilni tulec: F605 Stroj je pri nas deloval izključno v olju.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 26 kVA DIMENSIONS AND WEIGHT - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 30,788 h ACCESSORIES - Control: Fanuc 31i-B - 3-color status signal lamp - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * Ncsdpfxjyacvtj Agxjr Note: Functionality not guaranteed. To be checked by a qualified company on behalf of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 190 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT TOOL POST - Number of positions: 4 BACKWORKING UNIT Ncsdpfx Agsyacvgoxjr - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 26 [kVA] WEIGHT AND DIMENSIONS - Floor space required: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2,800 [kg] MACHINE HOURS - Power-on hours: 31,941 [h] ACCESSORIES - Control: Fanuc 31i-B - 3-colour status lamp - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company of the buyer. - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 51.488 h, Ta švicarski CNC stružnica Citizen CINCOM A32-VII CL je bila izdelana leta 2014. Opremljena je z glavnim vretenom s kapaciteto 32 mm, protivretenom in največjo dolžino struženja 3000 mm. Ponaša se s hitrim sistemom CHIDOMI, ki omogoča hkratno gibanje po vseh oseh in ponuja podajalno hitrost do 9.000 mm/min. Razmislite o priložnosti za nakup te švicarske stružnice Citizen CINCOM A32-VII CL. Kontaktirajte nas za dodatne informacije o stroju. Nsdox D Nhpepfx Agxscr Vrste uporabe: Struženje

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm Ncsdpoyacvaofx Agxjr - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of stations: 8 - Number of powered stations: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of stations: 8 - Number of powered stations: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of stations: 4 BACK WORKING - Number of stations: 8 - Number of powered stations: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Powered-on hours: 44,456 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status lamp - Driven tool motorization at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by the buyer’s qualified company. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machinable length: 190 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] TOOL HOLDER 1 Ncedpfeyacu Nsx Agxor - Number of positions: 8 - Number of powered positions: 3 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of powered positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of powered positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 26 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2800 [kg] MACHINE HOURS - Power-on hours: 44,449 [h] EQUIPMENT - Control unit: Fanuc 31i-B - 3-color status lamp - Motorization for driven tools at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Functionality not guaranteed. Should be checked by a qualified company appointed by the buyer. - Electrical transformer

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of manufacture: 2000 Nominal force: 1600 kN Mass: 13,800 kg Nominal stroke rate: 55 spm Min./max. strokes per minute: 10/55 spm Max. insertions per minute: 17 spm Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal strokes): 14,500 kJ Ram stroke min./max.: 10/200 mm Ram adjustment: 110 mm Upper dead center (adjusted high): 430 mm Njdpfswaiw Sjx Agxecr Maximum ejection stroke: 60 mm Bed size (H x D x W): 78/750/1250 mm Ram size (D x W): 600/850 mm Shank diameter: 60 mm Throat depth: 370 mm Max. die size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Stop position: TDC (Top Dead Center) Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with safety locks; • Clutch friction discs; • Clutch pins and bushings; • Flywheel bearings; • Flywheel oil seals; • Stroke change nosepiece; • Balancer cylinder seal kits; • Air pressure gauges; • Electrical control panel; • Inverter (speed variator); • Motor; • Motor pulley; • Refurbished work table (CNC machined) Supplied with six (6) months warranty, technical documentation and CE compliance certification. Electrical panel warranty twelve (12) months.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of motorised positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of motorised positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of motorised positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA DIMENSIONS AND WEIGHT Njdpfx Asyacu Aogxscr - Footprint: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg OPERATING HOURS - Power-on hours: 48,838 h EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status signal tower - Motorisation for driven tools at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar loader: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by qualified personnel of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven stations: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven stations: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST Ncsdpfx Aswr Ngksgxer - Number of positions: 4 SUB OPERATIONS - Number of positions: 8 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 43,982 h - Operating hours: 15,910 h EQUIPMENT - Control: Fanuc 31i-B - 3-color status lamp - Motorization for driven tools at: S11, S21, S51 - Driven guide bushing - Part removal system - Part ejector - Part conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire suppression system* NB: Functionality not guaranteed. To be checked by a qualified company at buyer's expense. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 190 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] Ncodpfx Aexyamujgxer SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 26 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2800 [kg] ACCESSORIES - Control: Fanuc 31i-B - 3-color status lamp - Driven tool motorisation at: S11, S21, S51 - Powered guide bushing - Parts removal unit - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. Should be checked by a qualified company contracted by the buyer.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm Ncodpfxjwr Nf He Agxjr - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL SYSTEM - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 48,983 h - Operating hours: 15,930 h EQUIPMENT - Control system: Fanuc 31i-B - 3-color status light - Motorization of driven tools on: S11, S21, S51 - Driven guide bushing - Parts removal unit - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire suppression system * NB: Functionality not guaranteed. Should be checked by a qualified company engaged by the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT UNIT - Number of positions: 4 SUBSEQUENT MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY Ncodpfx Aewr Nf Tsgxsr - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 43,842 h - Operating hours: 17,088 h ACCESSORIES - Controller: Fanuc 31i-B - 3-color status signal lamp - Driven tool motorization at: S11, S21, S51 - Powered guide bushing - Parts removal device - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by the buyer's qualified company. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE Nsdpfx Asxyamnsgxocr - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT ATTACHMENT - Number of positions: 4 SUBSIDE MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg ACCESSORIES - Control: Fanuc 31i-B - 3-color status lamp - Motorization of driven tools on: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. Should be inspected by a qualified company appointed by the buyer.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machinable length: 190 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] TOOL HOLDER 1 - Number of positions: 8 - Number of live tool positions: 3 Ncjdpfx Agexyamhjxsr - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of live tool positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT DEVICE - Number of positions: 4 SUB OPERATIONS - Number of positions: 8 - Number of live tool positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 26 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2,800 [kg] EQUIPMENT - Control: Fanuc 31i-B - 3-color status lamp - Live tool drive on: S11, S21, S51 - Driven guide bushing - Parts removal - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Proper function not guaranteed. Must be inspected by a qualified company of the buyer.