Oblikovalnik s spodnjim vretenom

TLC 1200 2/26

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, I am selling a KUPER FLI veneer splicing machine. Year of manufacture: 2007. Gjdpfxevxvc Hj Afweua The machine is in very good condition and available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Stroj za sestavljanje furnirja iz leta 2007. Ta model KUPER FLI je zasnovan za natančno sestavljanje furnirjev. Deluje z napetostjo 400 V in nazivnim tokom 14,5 A. Če iščete visokokakovostne možnosti obdelave furnirja, razmislite o stroju za sestavljanje furnirja KUPER FLI, ki ga ponujamo v prodajo. Kontaktirajte nas za več podrobnosti. Guodeyn Nq Hepfx Afwsa • Električni priklop: 400 V, 50 Hz, 3 faze • Nazivni tok: 14,5 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.200 mm, skupna masa: 2.000 kg, širina mize: 1.200 mm, Machine à assembler les placages Fabricant : Fisher Rückle Modèle : Impetum 1200 Année de fabrication : 2019 Pour l’encollage et l’assemblage longitudinal sans joint visible de bandes de placage alignées parallèlement, en un seul passage, avec des colles urinées couramment utilisées. Capacité d’assemblage Vitesse de passage réglable en continu, valeur d’expérience pratique env. 20 - 30 m/min. Données techniques : Longueur des bandes de placage (dans le sens du fil) : 380 - 3800 mm Largeur des bandes de placage (en travers du fil) : 45 - 1200 mm Épaisseur des bandes de placage : 0,4 - 1,5 mm Vitesse d’avance : 5 - 40 m/min Profondeur de col de cygne : env. 1.200 mm Godpfx Asymcu Nsfwjua Panneau tactile avec affichage de la température, de la vitesse et de la pression. Enregistrement des réglages machine pour les ordres récurrents. Chaînes de transport en acier inoxydable robustes et pratiquement inusables. 6 zones de chauffage pour des réglages de température indépendants. Groupe de refroidissement intégré pour refroidissement du réservoir de colle.

Stanje: rabljeno, Leto izdelave: 2020, KUPER FLI 1000 VENEER SPLICING MACHINE Splicing machine for gluing veneer strips, including glue application unit with a nearly horizontal glue application disc. Ideal in combination with glue cooling system. Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm optionally up to approx. 5.0 mm Veneer length: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Gsdpsyzhq Hjfx Afweua Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar THICK VENEER OPTION PACKAGE FOR VENEERS UP TO 5.0 MM THICK Expansion of machine control with a selectable operating mode, enabling integrated gluing and efficient splicing of veneers up to approx. 5 mm thick (depending on wood species and properties). Feed speed can be steplessly adjusted from 5 – 55 m/min. GLUE COOLING For optimum glue temperature: 12° – 14° C Significantly extends the glue’s pot life. Reduces glue waste and increases efficiency.

Stanje: dober (rabljeno), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Guedpfxjymfxqs Afwoa Longitudinal Glue Jointing Machine for Veneer - CE Standard The longitudinal jointing machine enables perfect splicing of two veneer sheets in a single operation, using a patented glue application system. This machine is equipped with two tanks for the mass application of glue. This innovation ensures high-quality, premium joint finishes, as the adhesive is simultaneously applied to both edges to be joined. The advantages of this glue application process are: 1. Increased working speed (the machine can reach speeds of 35–40 m/min, depending on wood type). 2. If, for any reason, glue is not applied to one of the two edges, a secure joint is still achieved, since glue is applied to the opposite edge. 3. Highly durable joints are achieved by applying glue to both edges, as the two sheets are bonded glue-to-glue, rather than glue-to-wood. Technical Specifications Veneer Sheet Dimensions: Thickness: 0.4–2 mm Minimum Length: 360 mm Minimum Width: 45 mm Maximum Width: 1200 mm Technical Details: Heating area length: 1200 mm Heating temperature: up to 240°C Feed speed: 10–40 m/min Glue type: UREA Power requirement: 6 kW Voltage: 400 V / 50 Hz Machine Dimensions: Length: 2600 mm Width: 2000 mm Height: 800 mm Weight: 2000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj za sestavljanje furnirja iz leta 2010. Furniertechnik LZM-LA 1000 omogoča največjo širino furnirja 1000 mm ter območje debeline 0,4–2,5 mm. Deluje s transportno hitrostjo približno 10–40 m/min in lahko doseže ogrevalno temperaturo do 230 °C. Če iščete kakovostne rešitve za obdelavo furnirja, razmislite o nakupu stroja Furniertechnik LZM-LA 1000, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Dimenzije furnirja: • Debelina: 0,4–2,5 mm • Minimalna širina: 40 mm • Največja širina: 1000 mm • Lepilo: • Predlepljenje: sečninsko in PVAc lepilo • Integrirano lepljenje: sečninsko lepilo • Postopek: • Transportna hitrost: cca 10–40 m/min • Dolžina ogrevalne cone: cca 1000 mm • Ogrevalna temperatura: do 230 °C • Grelni elementi: brezstopenjsko nastavljivi Gujdpfx Afoyyncyowoa • Elektrika: • Priključna moč: 6 kW • Napetost: 400 V / 50 Hz • Priključek stisnjenega zraka: • Priključni tlak: 6 bar • Poraba: cca 5 l/min