TIRELLI KS12/660 izpiralnik (2003)

TIRELLI Rinser

Stanje: rabljeno, Glass bottle filling line for hot filling of smoothies. Consisting of the following components: - Unpacking table Bedpfx Aewgc R Eoiqowu - Bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type "VW 24/1") - Flash pasteurizer - Pressure tank - Capper (Marchesini, type "ML667") - Cap sorter - Tunnel cooler - Blower - Cap inspection (BBull CIS) - Labeller (Anker, 1999, type "Roland 10/4") - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler Machine (additional): Hot filling, with pasteurization Capacity: 5,000 bottles/h Formats: 0.25-litre bottles, twist-off caps Equipment: Unpacking table, rinser, vacuum filler, flash pasteurizer, pressure tank, capper, cap sorter, tunnel cooler, cap blower, cap inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler.

Leto izdelave: 2026, stanje: novo, The washing system with hammer mill for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grid, a washing tank, and a conveyor belt. The produce is loaded into the water, where it undergoes a preliminary wash. It is then transported further via the conveyor belt, which cleans the fruit thoroughly with fresh water. After cleaning, the produce enters the mill, where it is processed to the desired mash consistency using the preferred screen. • Easy to clean • Low maintenance requirements • Belt speed is continuously adjustable in both directions • Equipped with 2 swivel castors Bjdpfsv Srguex Aiqowu • Equipped with 2 fixed castors Technical specifications: • Rated output: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4“ • Connection for cleaning: G ½“ • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Stanje: dober (rabljeno), 50-position filling machine with crown capper. Previously used in a winery for filling 1 L glass wine bottles. Bjdpfx Ajvq Suijiqswu

Stanje: rabljeno, Leto izdelave: 2018, Pregled Gruber AFD6 je polnilni stroj za steklenice in Party KEG sodčke, proizveden leta 2018 pri nemškem proizvajalcu Gruber, z 725 obratovalnimi urami. Stroj je takoj na voljo. Tehnične podrobnosti - Zmogljivost - 800 steklenic/uro (pri 0,33 l) - 750 steklenic/uro (pri 0,5 l) - 600 steklenic/uro (pri 1,0 l) - 400 steklenic/uro (pri 2,0 l) - 240 steklenic/uro (pri 5,0 l Party KEG) Bsdpfx Aisu I Hr Uoqewu - Zmogljivost se razlikuje glede na vsebnost CO2 in temperaturo piva (v praksi doseženih do 1.000 steklenic/uro pri 0,33 l) - Dolgocevni polnilnik s 6 polnilnimi mesti - Popolnoma avtomatiziran proces polnjenja - Enostavno ali dvojno splakovanje s CO2 - Siemens S7 krmiljenje z zaslonom na dotik - Obratovalne ure: 725 ur

Stanje: novo, številka stroja/vozila: 190040019, Inclined conveyor (4,000 x 390 mm) Inclined conveyor with direct drive and PU/PVC belt Bwsdpfx Aotvfb Neiqsu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, STORK VS 24/8 Monoblock Filling Machine after a complete overhaul carried out by the professional company Z.M. ROBAK. The machine is practically free of any signs of use; the protective foil is still present on the casing. The machine was most recently configured for filling glass containers and was used for trial filling of alcohol. Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 (adapted for aluminum screw caps) Capacity: approx. 7,000 bph (700 ml) Possible use of bottles with the following dimensions (after format adjustment): - diameter: Ø 45 – Ø 110 mm - height: 105 – 400 mm - standard neck diameter: Ø 28 mm - optional neck diameter range (format change): Ø 18 – Ø 43 mm Machine dimensions: - width: 2,900 mm - height: 2,200 mm - depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – not used in production since modernization Bwsdpfxeu Nhiqo Aiqou Condition: machine is practically unused. The machine comes with original electrical documentation.

Leto izdelave: 2026, stanje: novo, The pasteurization system is fully automated through an industrial control system and a touchscreen interface. If the temperature of the juices to be pasteurized drops below the required level, the outlet side of the machine is shut off and the juice is diverted through the bypass until the target temperature is reached again. Filling can then be continued. At the end of operation, the tube coil can be easily cleaned using a sponge ball. Our system requires minimal maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power consumption: 27 kW, 400 V, 40 A Material: stainless steel Wnr. 1.4301 / AISI 304 Water buffer: 80 L Bwsdpev Srl Rofx Aiqou Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling devices

Leto izdelave: 1998, stanje: rabljeno, Shrink wrapping machine for shrink-wrapping 6 or 12 bottles Bwjdpfeb Im Ttjx Aiqeu with manual carton tray insertion or also usable without trays (film-only operation)

Stanje: novo, Leto izdelave: 2025, Automatic filling and capping system for liquid dispensing. Suitable for various liquids and oils from the food sector (still water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as non-food products (perfumes, cosmetic oils, cleaning agents, etc.). The automatic filling machine is equipped with two filling heads that move both vertically and horizontally, enabling continuous filling and thus achieving a higher cycle rate. The movable filling heads of the filling machine automatically detect the position of the bottles and the diameter of the bottle neck, offering additional benefits such as minimized adjustment work and sensor settings – within a defined range. Changing to other bottle sizes is therefore made much easier, which ultimately results in shorter downtimes due to time savings. Simple adjustment to different bottle widths and heights without the need for additional format parts. After filling, bottles are transported by conveyor belt to the automatic capping machine. Cap positioning and closing are fully automatic. Bwedpsv Nk R Hjfx Aiqsu - Specifications: Filling range: 30-3000 ml; Number of filling heads: 2; Maximum machine cycle rate (idle): 50 cycles/min; Stainless steel version 304, product-contacting parts made of stainless steel 316; Dimensions and weight of the filling system depend on the final layout. Please note that our new equipment prices are often below typical used equipment prices. Feel free to contact us and specify your packaging requirements. - We usually have 30-50 different new machines available immediately from stock. For machines custom-manufactured to client specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), številka stroja/vozila: 24591, Throughput approx.: 2 - 5 m³/h Infeed and material discharge opening: 300 mm Ø Bsdjdxmd Ujpfx Aiqewu Required space (assembled, with bridge): 1400 x 1200 x 2200 mm