Stroj za brušenje orodja

TGT V2 Maxima

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It is equipped with an ELBARON mist extraction system and includes collets for diameters up to 20 mm. Extras encompass robot pallets, a spare spindle, and grinding wheel packages. Take advantage of this opportunity to acquire the TGT V2 Maxima. Contact us for further information. Additional Equipment • ELBARON mist extraction / Robot pallets / Collets for all standard diameters up to 20 mm / Spare spindle / Grinding wheel packages, including approximately 25 grinding wheels Machine Advantages Technical Machine Advantages • Operating hours: 42,000 minutes • Machine in as-new condition / original spare spindle available, ensuring no downtimes during spindle service / full documentation and installation manual included Bcjdex D Hi Repfx Ag Tjw Further Information Spindle Bearings: Front/Rear: 7010 CTYN DU L P4 (NACHI) Lubrication grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing) Tightening torque: 58 Nm (front/rear) Runout accuracy: ≤ 0.002 mm Motor: LENZE 7.5 kW (10 HP), 4-pole Speed: 0–4500 rpm (frequency inverter) Belt: PJ-12-1143L (GATES/FENNER) 2 Feed Drive Units – X and Z Axes Travel: X-axis: 300 mm Z-axis: 680 mm Ball Screw: Type: Fixed–Supported Bearings: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque) Ball screw: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm) Motor: BECKHOFF AM8053-0G20 (11.4 Nm) Coupling: SFC 050 DA2-24B-20B (MIKI PULLEY) 3 Feed Drive Unit – Y-Axis Travel: 300 mm Ball Screw: Bearings: 25TAB06DBFLP4 (NACHI, 62 Nm) Ball nut specification: BIF 3210-5 (THK) Motor: BECKHOFF AM8061-0GB1 (12.8 Nm) Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY) Rotary Table – A-Axis Bearings: 7014 CTYN DUL P4 (NACHI) Tightening torque: 255 Nm (front), 62 Nm (rear) Runout accuracy: ≤ 0.002 mm Lubrication grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing) 5. Rotary Table Unit – C-Axis Bearings: YRT 100 (GOLDBULL) Mounting torque: 14 Nm (3-stage: 40% → 70% → 100%) Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm Encoder: RENISHAW Main Coolant System Flow rate: 85 L/min Tank capacity: 400 liters Pump: RKM206 (Rajamane, 1.5 kW, 6-stage) Filtration: Paper filter Para mol N 334/150 (0.01 mm) Lubrication Arrangement Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC) Dosing cartridge: 320410-3 (LUBRICANT) Steady Rest (manual) Vertical lift: 3 mm Diameter range: Ø3–Ø22 mm Carriage travel: 120 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.100 mm, moč: 46 kW (62,54 KM), razdalja med središči: 2.000 mm, delovne ure: 1.200 h, Na voljo je stružnica DMT CD1100 z upravljalnikom Heidenhain in samo 1200 delovnimi urami. Območje obdelave zajema premer vrtenja okoli 1100 mm nad ležiščem in okoli 800 mm nad planskim suportom. Nosilec za orodja je Multifix D1. Razdalja med konicama znaša 2000 mm. Bedpfx Agjxlza Ho Tocw Glavni pogon vretena je motor z močjo 46 kW pri 60 % ED s dvema prestavnima stopnjama. Konjiček: - Premer pinole: 125 mm - Stožčasta nastavitev: 6 Mk Dobava: Osebni prevzem Plačilo: 100 % pred prevzemom z bančnim nakazilom takoj po izdanem računu Vsi podatki so nezavezujoči, vmesna prodaja pridržana. Stroj se prodaja brez garancije in ostane v naši lasti do popolnega plačila.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.000 h, Stroj je v brezhibnem stanju. Opremljen je s sistemom za odsesavanje brusnega prahu ELBARON. Po želji je možno stroj dobaviti tudi brez te naprave. Paket vključuje vpenjalne tule za vse običajne premere do 20 mm. Priložen je popoln opis in namestitveni priročnik. Na zahtevo je na voljo originalna rezervna vretena, zato pri vzdrževanju vretena ni čakalnih dob. Bodpfx Agst Dyknj Tscw

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Bjdpfx Agjiknv Eo Tjcw

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Bcsdpfehmvawjx Ag Tjw

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A DMT lathe is available. Centre distance: 1000 mm, swing diameter over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, spindle speed: 4000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions X/Y/Z: approx. 2150 mm/1150 mm/1700 mm, weight: approx. 1800 kg, control system: Heidenhain, operating hours: approx. 300 h. Documentation available. On-site inspection is possible. Bcjdpfx Agowtg H Re Tjw

Stanje: rabljeno, Leto izdelave: 2010, IMT W20 T2 Vertical Turning Machine Bcedpfx Aewb Svgsg Tow Control: Fanuc 32i-Model A Turning diameter: 542 mm Chuck: Schunk 500 160 Turning length: 450 mm Maximum swing diameter: 640 mm Maximum spindle speed (rpm): 2,500 Spindle power: 29.5 HP X-axis travel: 450 mm Z-axis travel: 450 mm X-axis rapid traverse: 15,000 mm/min Z-axis rapid traverse: 15,000 mm/min Number of turning tools: 6

Stanje: rabljeno, Stationary Hardness Testing Machine / Hardness Tester The hardness tester can be operated manually using a template. The device is compatible with software, but for data protection reasons, the hard drive with the software has been removed. Device is sold without software. Upgrade for Briviskop BL 3 Hardness Tester: HMEWin-Compact consisting of: €3,900.00 - PC with integrated touchscreen - HMEWin-Touch Basic Software - Hub with 12-pin connection for the measuring system - Complete support system for attachment to the machine frame. Bodpfx Agerfwyns Tecw Labour for upgrade, commissioning, calibration, and staff training approx. €1,100.00 For further technical data, see nameplate. You are welcome to arrange a viewing. You will receive a proper invoice. For foreign customers, a net invoice can be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and discover our other offers. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za povrat energije Bcodpforb E Hbjx Ag Tjw -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 50A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0CA0 -Dimenzije: 290/50/H480 mm -Teža: 6,8 kg

Leto izdelave: 2018, obratovalne ure: 1.256 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2189, OKUMA LB3000EX-II – Particularly well-suited for universal turned parts and the complete machining of complex workpieces thanks to generous flat-bed guideways, while high-torque drives ensure outstanding precision and long-term accuracy. TECHNICAL DETAILS Swing over bed: 580 mm Maximum turning diameter: 340 mm Workpiece length: 950 mm Travel distance X / Z / Y: 230 / 510 / 120 (+70/-50) mm C-axis: 360 / 0.001° Control: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Stroke: 1015 mm Spindle speed: 4200 rpm Bsdpent T Auefx Ag Tjcw Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Toolholder: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6000 rpm Operating hours: 1,256 h Control on: 1,660 h MACHINE DETAILS Dimensions (L x W x H): 3,420 x 2,041 x 2,444 mm Weight: 6,600 kg Connection voltage: 400 V, 3 phase, 50 Hz Power consumption: 38.9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hob milling toolholder (see document in attachment) is not included in the scope of delivery.