Optimizacija sistema za prečno rezanje CROSS CUT 306-4M

TechnologieCNC CROSS CUT 306-4M

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Bsdpfjw Sy T Hox Ag Tscw Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale: Felder spindle moulder F-700 Z with 4 spindle speeds. This machine has been used as a display model in our showroom, making it as good as new and sold with full warranty / guarantee. Technical data: - 4 spindle speeds - Spindle can be tilted from 90° to 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power: 5.5 kW / 7.5 HP with star-delta start Bcjdpswp Ri Usfx Ag Tsw - Year of manufacture: 2023 / like new The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Information Tel.: 03137-3109 Related terms: spindle moulder, milling machine, moulders Reference: R-D1618

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Bedshclffepfx Ag Tjcw Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Bsdevupm Djpfx Ag Tecw Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: rabljeno, Cut Thickness Calculator for Band Sawmill Cutting Thickness Computer Alternative to Mudata control system with option for individual customization Industrial Touch PC Bodpfx Agjiwaxns Tocw Siemens Simatic S7 Compatible with rotary encoder or other measurement systems Cutting programs can be easily modified Cutting programs can also be grouped Software is customized according to customer requirements Operation possible via touch display or keyboard Next step in the cutting program can be triggered by button on the joystick All relevant values can be displayed individually on the display (e.g. total distance, next cut, complete cutting program, value of previous cut, feed rate, and more) All parameters can be displayed and modified on a dedicated parameter page or on the main screen The sensor for blade deviation monitoring can be evaluated (possible linkage with feed rate) Positioning via proportional valve and hydraulic motor or via stepper motor Inspection during operation is also possible on request Currently in operation on Primultini SGA 1300 CEB Suitable for any carriage size and any make For an appointment or further details, please just call.

Stanje: dober (rabljeno), Motor 18,5 kW Mere rezanja Maks. premer hloda 95 cm Svetla med valji 73 cm Maks. širina reza (kant) 64 cm Maks. višina reza nad žago 39 cm Maks. dolžina reza 12 m Oprema glave Naprava za avtomatsko nastavitev debeline reza Premik glave gor/dol Električni Premik glave naprej/nazaj Električni Vodilna roka žaginega lista Električna Bedsxhb Uvepfx Ag Tocw Sistem za napenjanje lista Hidravlični z zračno blazino Odkorjevalnik Premer izvoda za žagovino 150 mm Žagina tračna Dolžina 4670 mm Širina 38 mm 50 mm Vodilna kolesa žaginega lista Premer 600 mm Tip S trakom Material Lito železo Polna hidravlika

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Bcjdpfx Ajph Uk Nog Tsw Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Leto izdelave: 1994, Stanje: dober (rabljeno), Rivo bandsaw sharpening machine Bedpjpl D Hxjfx Ag Tjcw Model GA 250

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC blade technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible, or rigid non-metallic materials Features of the used machine: Bodpoif Ek Rsfx Ag Tscw • 1 cutting bridge and 1 multifunctional tool head The machine is sold equipped with a driven rotary knife, an electrically oscillating knife, and a milling unit (including extraction system) • Multifunctional tool head holds up to 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard delivery includes gray conveyor belt table. Green-blue exchange conveyor available (offers high contrast for dark materials) Additional tools are available upon request: • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Driven Rotary Tool • UCT Universal Cutting Tool (drag knife) • KCT Kiss-Cut Tool • CTT Creasing Tool • V-Cut Angle Cutting Knife • Printer mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system User-friendly • Easily interchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones can be activated at the touch of a button Rapid return on investment • Low operating costs with high added value • Optimal material utilization possible with nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy ±0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (optionally expandable with appropriate unwinder) • Rapid ROI (Product photo for illustration purposes) The machine is CE-certified.

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Bodpfegwqk Ssx Ag Tjcw Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni.