Linija za obrezovanje desk

Lindsaw

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Two Vecoplan drag chain conveyors available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, max. incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, max. incline: 70°, section length: 22 m. Documentation available. Inspection on site possible. Itedpfxjt Iw Rye Al Nof

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Itodpforkgy Ujx Al Nef Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm Itjdpfxjg Tzbho Al Njf • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: rabljeno, Prodaja v paketu: Dominant 715, Dominant 547 in PlateRite CTP. Itodjwxtrqjpfx Al Njf Oglejte si naše ostale oglase za druge stroje. Enobarvni offset tiskarski stroj. Format A2.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control Itsdpfx Aeqfc Egel Nsf - Optional with magnet beam or spreader

Leto izdelave: 1993, stanje: dober (rabljeno), Braun WES tensioning carriage fully hydraulic with auxiliary carriage with rails Isdpfjfuh Dyox Al Netf Track width: 79 cm good condition – immediately available Please also see my other listings. I look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit Itedpfxod Inkts Al Nsf - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Iodpfx Aljuf Sy As Netf Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: novo, Leto izdelave: 2025,

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija za vhod pred skobljalni stroj za KVH/BSH Iodpfxovbtps Al Njtf - Za dolžine do cca 13 m - Idealna KVH+BSH linija pred skobljalnim strojem - Vzdolžno odstapljanje – posamezno podajanje - Prečne krožne žage 4 kosi, bočno nastavljive - Prečni razrez: 180 x 220 mm, 150 x 300 mm - Dovolj je ena upravljalna oseba