Navpična stružnica CNC

TDZ Turn VLC 1800

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Os Y (vertikalno): 4000 mm Os Z: 1000 mm Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Podpfx Agju R Rk Hjperd Zamenjava orodja, 90 mest ZF menjalnik Notranje hlajenje Odvzemanje ostružkov

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.400 mm, premer vretena: 100 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is in good technical condition, currently disconnected. Equipped with a Heidenhain TNC 530i control system, chip conveyor, and a 40-position tool magazine. Psdpev Upbnjfx Agpsrd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Psdpfet I Di Aex Agpord Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. Predpfx Aenfvx Nogpod With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Psdpfxsizlh He Agpjrd Machine weight approx.: 8 t Required space approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-axis travel: 170 mm Z-axis travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine *

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, poteza s peresom: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Max. grinding diameter: Ø350 mm Pjdpfx Asc Tnq Iogpjrd Max. workpiece weight: 130 kg Grinding length between centers: 600 mm Grinding spindle speed: 1,500 or 2,000 rpm (Manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120-liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic power unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange extractor - Dressing holder with dressing diamond on tailstock - 2 dead centers - Dial gauge for table adjustment to 0° - Machine lamp - 3 detachable crane transport hooks - Leveling screws with base plates - Machine documentation Including the following special accessories: - Internal grinding device - Frequency inverter (Mitsubishi) for speed control at the work spindle - Frequency inverter for speed control at the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780

Stanje: dober (rabljeno), Maks. premer: 560 mm Prsdpev Dvzyjfx Agpsd Delovna dolžina: 3550 mm Maks. dolžina obdelovanca: 4000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.139 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 599 mm, premer struženja: 530 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 56 mm, potovalna razdalja osi X: 530 mm, pomik osi Y: 100 mm, pomik po osi Z: 599 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, Stunning machine with potential integration for a brand new IEMCA Master 52 bar feeder, only 1,100 operating hours. Multitasking capabilities enable simultaneous milling and turning operations. The machine features a robust, high-precision cast iron frame. Double tool magazine: Revolver turret + internal magazine with 12 additional protected CAPTO tools, 12 more tools mounted on the turret, plus 6 hybrid 25 mm square holders (refer to the attached technical datasheet). Pedpfx Agevv Tvfepsrd Equipped with dual spindles for secondary machining operations. Controlled by Fanuc 0i-TF CNC with Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Supplied with complete documentation. Also comes with transformer, chip conveyor, 15 Bar high-pressure coolant pump, tool presetting system, piece handling arm, finished parts conveyor belt, and work lamp.

Stanje: novo, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 1.500 mm, položaj glave za glodanje: Universal-Diagonal-Fräskopf, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, največja hitrost vretena: 6.000 obr/min, vrtilni razpon: 1 °, vrtilni moment: 1.178 Nm, dovod hladilne tekočine: 36 letvica, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, TOVARNO NOV STOJNO REZKALNI STROJ Krmiljenje in motorji: Digitalno krmiljenje poti HEIDENHAIN TNC 640 HEIDENHAIN paket (motorji, merilni sistemi, ročni kolešček) Delovna miza: Ploščata miza / vrtljiva miza / nihajno obdelovanje (odvisno od izvedbe) Prjdpfxjhy Au Io Agpod Dodatna oprema: Izmenjevalnik orodij z dvojno roko, 40 mest Transporter za odrezke s tečajno verigo (vzdolžno) Delovna miza po želji kupca: ploščata / vrtljiva / nihajna obdelava Natančnosti: Pozicijska natančnost: ±0,030 mm Ponovljivost: ±0,008 mm Odzivamo se samo na povpraševanja iz Nemčije

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The following machines, all in excellent condition, are available for sale – ideal for professional use in wood processing. Saw line consisting of: • Infeed Device ZV21, Model EV 50 • Profiling Chipper ZD31, Model VM50 • Outfeed Device AV31, Model VZM • Centering Device VZ21, Model VZV • Log Rotator DV21, Model DV70-2 • Infeed and Centering Unit EVP • Profiling Chipper VM50 • Profiling Unit VMP450 F61 (4x110kW) • Microtec Measuring System Additionally Available Further used woodworking machinery ?️ Additionally available: Further used woodworking machinery Log Handling Springer  • 5-arm design  • Log Sorter (5-arm)  • Receiving Log Feeder (26 m) Log Rotator LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 Units of Chipper Infeed – Infeed and Centering Unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separating Conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 Units LINCK Chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – Left & Right Side  • Dimensions: 2.8 m x 2.1 m x 2.5 m each  • Weight: 3 t each Podpow Stiujfx Agpjrd LINCK Pre-centering Unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log handling system with feeder and log conveyor Location & Availability All machines are located in our warehouse at A-3525 Lugendorf Nr. 38 and are available for immediate delivery. Price on request For further information or to arrange a viewing appointment, please feel free to contact me.