Pokrov za KLT skladiščno škatlo

TBA 400x300

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Cedpfx Aofxyhfsfnepw Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder Csdpegpxc Sofx Afnjpw - Vibration-damping machine feet

Stanje: novo, AXA cantilever swing crane, 360° rotation. Max capacity: 500 kg. Max height: 2,804 mm. Max outreach: 1,360 mm. Easily maneuverable thanks to 360° rotation and high-capacity, high-smoothness swivel castors with bumpers and parking brakes. With a front clearance of only 995 mm, it can be used in narrow aisles and confined spaces. The lifting arm is extendable to 4 different positions. Cedpfxogypgdj Afnspw

Stanje: novo, Pressure 8.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table surface 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 27 kg Dimensions (L x W x H) 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke parts need to be processed with constant force. Outstanding technology - Long and precise spindle guidance for maximum dimensional accuracy Cpodpfx Aofv Awajfnsw - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinders with end-position cushioning on both sides - Dual guide rings on the piston for smooth and consistent operation - Oil-resistant sealing elements Unique features of the PND series - Spindle locked against rotation - For the PND 85/S, spindle return occurs via only one cylinder chamber for further air savings - Fine adjustment of working height is easy, quick, and precise in two steps: - Basic setting by simply loosening the clamping screws on the column - Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and air savings

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Csdpfovprv Rex Afnopw Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller Cpsdpfx Afob U Hwnonsw - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Item number: 8143983 Serial number: 143983 The KUKA KRC4 Linear Axis is a high-precision, robust motion unit, ideally suited for industrial applications. It ensures exact control over motion sequences and plays a central role in automation processes and robotic systems within manufacturing. Its durable construction guarantees consistently reliable performance, even under the most demanding operating conditions. Cpedjvzxg Tspfx Afnow

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 860027, Offer 24331 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm Cpodpfx Asu Aq Amofnew - Tapping capacity up to: M16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm, 200 - 3600 rpm - Motorized movement of the drilling unit - Motorized table clamping in X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space: approx. W 1750 x H 1600 x D 1000 mm - Weight: approx. 1200 kg

Stanje: zelo dobro (rabljeno), Double-head cylinder projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-acting cylinders with approach stroke Control cabinet mounted according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring loop Cylinders can operate in cascade or simultaneously Cpjdpfxed Ip Alj Afnsw Weight: 1,090 kg The machine is being overhauled / currently undergoing refurbishment.

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and Cpodpstycdkjfx Afnew will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement