Peč za kaljenje stekla

Tamglass HTF-2136-ABT-10-R

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Ppsdexwdygopfx Agxjr Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Vertikalni stroj za obdelavo robov stekla z 10 skodeličnimi koluti, nastavljiv kot 0-45° dejansko prevoženih metrov: 260.000 min. dimenzija stekla: 40 x 40 mm debeljina stekla: 3 - 55 mm hitrost: 0,4 - 6 m/min napetost: 400 V 50 Hz 39 A Pedow U Ddujpfx Agxopr teža: 4600 kg

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7 Ppsdpfx Aog Dgymsgxer

Leto izdelave: 2024, stanje: novo, The roll crusher RC 200 is ideally suited for crushing medium-hard, brittle, and hard materials such as coal, ores, slag, minerals, graphite, and many more. Pedjf Ulycjpfx Agxepr Max. feed size*

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. Ppsdpfx Agexnvq Eoxsr 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test © Alarm function test © Various control components • Price on request

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, skupna širina: 5.000 mm, skupna dolžina: 10.500 mm, Dvigalna miza za rezanje stekla Ppjdpfx Aev Dl Uiogxor

Stanje: dober (rabljeno), Leto izdelave: 2005, URBAN welding and cleaning line type CC 16/43-26/23, consisting of AKS 1600 welding machine and SV 430 cleaning unit. Psdpfsvyqbmsx Agxspr

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Delovne ure: 4428 - Krmiljenje: CNC - Znamka krmilnega sistema: Siemens - Moč [kW]: 37,0 - Obratovalni tlak [bar]: 4137 - Premik X-osi [mm]: 6500 Ppodpfx Ajwnidhegxer - Premik Y-osi [mm]: 3300 Finančne informacije DDV: Navajena cena je brez DDV DDV/Obdavčitev po razliki: DDV je odbiten za podjetja Dostava in odkup so možni kadar koli za vse industrijske naprave Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, delovna višina: 720 mm, Oprema: dokumentacija / priročnik, Insulating glass production line without sealing robot Max. glass size: 2500 x 1600 mm Min. glass size: 250 x 180 mm Ppodpfx Agswikn Rsxsr Gas filling press: double and triple glazing possible

Stanje: dober (rabljeno), Leto izdelave: 1970, For sale: Hilgeland forging machine, model CH5AL The machine is in perfect technical condition. Machine weight: approx. 20 tons. Ppjdpfx Agju Szucoxor The forging machine comes with extensive tooling. Loading provided. Max diameter of normalized bolt: 16 mm. Max length: 200 mm.