4/5-osni dvojni obdelovalni center

SW Schwäbische Werkzeugmaschinen BAW06-22

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 22.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2080594, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, delovne ure vretena: 9.500 h, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Control System SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Power supply type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Operating weight (machine): 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool stations Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Bsdoxt D Ezspfx Abxoww Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swivel-mounted support with two separate rotary tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note System is delivered without product-specific tools, fixtures or robotic grippers.

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 CNC control: Siemens 840D 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit Bwjdpjtgu Ixofx Abxsw 2 x tool length measuring system 2 x upgrade kit for torsion compensation A-/U-axis