Obdelovalni center

SW Schwäbische Werkzeugmaschinen BAW06-22

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 22.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2080594, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, delovne ure vretena: 9.500 h, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Control System SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Nedpfxjxt D Eze Adtedd Power supply type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Operating weight (machine): 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool stations Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swivel-mounted support with two separate rotary tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note System is delivered without product-specific tools, fixtures or robotic grippers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Nedpfx Aou R Rk Hodtedd Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Os Y (vertikalno): 4000 mm Os Z: 1000 mm Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Zamenjava orodja, 90 mest ZF menjalnik Notranje hlajenje Odvzemanje ostružkov

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 48.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2080233, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Control SIEMENS 840D Electrical Connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Power system: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv-factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv-factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv-factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Nominal power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 600 mm Travel paths: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two directly driven NC rotary tables (A/U axes) Double-sided gearing on the swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Ndsdpfx Aoxt D Ebedtjd Peak torque: 981 Nm Nominal torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential torque: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Nodpfx Ajiva Dkjdtjdd Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Leto izdelave: 1985, Stanje: rabljeno, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Spindle taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Maximum longitudinal table travel (X): 900 mm Maximum cross ram travel (Y): 600 mm Maximum boring spindle stroke (Z): 200 mm Maximum vertical movement of cross beam (W): 635 mm Vertical clearance between table and boring spindle max.: 15 - 850 mm Distance between uprights: 950 mm Nedpot Hwyxofx Adtsdd Spindle diameter: 110 mm Spindle taper (internal/external): ISO 40 18 spindle speeds: 10 - 2,500 rpm Infinitely variable milling feed, table: 1 - 6,000 mm/min 4 milling feeds, boring head: 30 - 180 mm/min 6 drilling feeds: 0.01 - 0.39 mm/rev Positioning accuracy for all 3 axes (as new): 0.003 mm Rapid traverse (table / boring head slide / cross beam): 6,000 mm/min Spindle drive power: 6.2 kW Total power requirement: approx. 15 kW - 380 V - 50 Hz Machine weight: approx. 9,000 kg Accessories / Special features: - 3-axis CNC control, BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Stanje: novo, The new vacuum pump is available from stock and ready for immediate use. We recommend that installation be carried out only by trained personnel. Adaptation material available on request. Oil filling: not included Technical Data: Ndodpfxottzxrj Adted 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return into non-return valve housing Gas ballast Including level switch Ultimate pressure: 0.1 mbar Subject to prior sale! This offer is valid only for customers within Germany and European countries!

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis as full NC axis A-axis horizontal/vertical - NC rotary table (C-axis) - 72-position tool changer - Chip conveyor - Electronic handwheel - Coolant system (internal coolant supply 20 bar) Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Njdperz I Hbefx Adtsdd Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: ±90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Number of tool places in ATC: 72 Spindle drive power 100/40% duty cycle: 17/25 kW Machine weight approx.: 9000 kg Technical data, accessories, and machine description are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.050 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 213 mm, pomik osi Y: 572 mm, Stružniški center Haas Tip: ST 25 Leto: 2017 Njdpfx Adordg H Hetodd Obratovalne ure: 6047 h Maksimalna nazivna moč, pogonski sklop: 22,4 kW, pogon na jermen Kapaciteta palice, maks. hitrost: 76,0 mm, 3400 obr/min Gibanje osi (X, Z): 213 mm, 572 mm Transporter za ostružke Prehod vretena: 75 mm

Stanje: rabljeno, Leto izdelave: 2007, Maximum gear cutting diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70–1220 mm Stroke length: 30–330 mm Stroke rate: 10–200 strokes/min Total power requirement: 138 kW Machine weight: approx. 38 t Space required: approx. 11 x 5 m Machine: Fully CNC-controlled machine with electronic gear synchronization for C and D axis, equipped with digital INDRAMAT drive technology. Self-rigid machine bed of welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around design, Longitudinal guide with roller recirculating shoes. Precision-ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology featuring backlash-free transmission. Linear measuring system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded double worm gear, index wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through table bore diameter 500 mm, open at the bottom. Water-cooled digital AC servo motors. Machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide, and wrap-around roller recirculating shoes. Precision-ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Rotary encoder for axial positioning. Gear shaping head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and cutter relieving, stroke length 330 mm, shaping spindle diameter 160 mm. Nodpfxov E R Eij Adtjdd Hydrostatically mounted shaping spindle, straight guiding and lateral guiding for relieving motion. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke numbers from 10 – 200 strokes/min, stroke speed from 5 – 45 m/min. Shaping spindle speeds for working and return stroke can be programmed independently. Within the cutting area, the spindle speed remains constant. Cutter wheel speed max. 10 rpm, digital AC drive technology. Cutter relieving direction for internal and external gear cutting can be manually reversed. Lateral offset of the shaping spindle axis up to max. 50 mm off machine center, manually adjustable, to prevent cutter wheel collision during return stroke.