Dvojno vreteno 5 osi BAZ

SW Schwäbische Werkzeugmaschinen BAW 06 - 22

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 CNC control: Siemens 840D 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Iodetgu Ixopfx Ah Aotr Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit 2 x tool length measuring system 2 x upgrade kit for torsion compensation A-/U-axis

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 15.000 W, hitrost vretena (min.): 5.000 obr/min, potovalna razdalja osi X: 157 mm, pomik osi Y: 35 mm, pomik po osi Z: 464 mm, največja hitrost vrtenja: 6.000 obr/min, skupna višina: 1.885 mm, skupna dolžina: 3.675 mm, skupna širina: 2.258 mm, skupna masa: 9.000 kg, CNC Control: Fanuc 18i-TB Capabilities X-Axis Travel (mm): 157.5 Y-Axis Travel (mm): 35 Z-Axis Travel (mm): 464.8 B-Axis Travel (mm): 600 C-Axis: 360º (0.001º increments) Turning Length (mm): 399 Max. Turning Diameter (mm): Ø 190 Distance Between Spindle Centers (mm): 750 Bar Working Capacity (mm): 52 Upper Turret Number of Tool Stations: 12 Max. Speed of Driven Tools (rpm): 6,000 Driven Tool Power (kW): 5.5 / 3.7 Number of Upper Turrets: 1 Lower Turret Number of Tool Stations: 12 Max. Speed of Driven Tools (rpm): 6,000 Driven Tool Power (kW): 5.5 / 3.7 Milling Function: Both turrets Number of Upper Turrets: 1 Main Spindle Max. Spindle Speed (rpm): 5,000 Spindle Drive Power (kW): 15 / 11 Sub Spindle Max. Spindle Speed (rpm): 4,500 Spindle Drive Power (kW): 11 / 7.5 Equipment Parts Catcher Bar Loader ILS – RBK Machine Running Time: Nominal kVA: 67.2 Basic Machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000 Itjdpfoxiwnnox Ah Aor

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 22.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2080594, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, delovne ure vretena: 9.500 h, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Control System SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Power supply type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Operating weight (machine): 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool stations Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swivel-mounted support with two separate rotary tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note Itsdpfx Ajxt D Ezoh Aer System is delivered without product-specific tools, fixtures or robotic grippers.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 48.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2080233, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Control SIEMENS 840D Electrical Connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Power system: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv-factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv-factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv-factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Nominal power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 600 mm Travel paths: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two directly driven NC rotary tables (A/U axes) Double-sided gearing on the swivel carrier Swivel time 0–180°: 3.5 s Itodpoxt D Ebjfx Ah Aor Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Nominal torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential torque: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, višina struženja: 2.150 mm, premer struženja: 2.000 mm, Swing diameter 2,000 mm, turning height 2,150 mm, X-axis 1,150 mm, rotary table diameter 1,800 mm, chip conveyor, 25-position tool changer, fleece filter cleaning system, Ijdpjw Edvysfx Ah Astr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with Rotary Table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: - C98 control system with BP26_SE operator panel - VAST GOLD sensor system - 13-position probe changer magazine - Probe change plate - Probe accessories - Calibration sphere - Reference probe - Workstation with monitor - Calypso Basic 5.2 software Itsdsvdtzdspfx Ah Aor - Upgrade to current Calypso version and additional options possible - Complete retrofit with C99 and current Calypso version possible - Available at short notice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Vacuum tempering furnace Manufacturer: BMI Year of manufacture: 2001 Maximum temperature: 750°C Year of manufacture: 2001 Batch size: L x W x H 1200 x 600 x 600 mm Heating type: Electric Iodpevcyf Tsfx Ah Ajtr Heating power: 100 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, obratovalne ure: 4 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Na prodaj je popolnoma obnovljen vzdolžni stružni stroj TORNOS DECO 20. Prenovo je izvedel pooblaščeni serviser Tornos z originalnimi tovarniškimi nadomestnimi deli in vključuje naslednje sklope: - premaz zaščitnih pokrovov - menjava vseh krogličnih vreten - menjava vseh linearnih vodil - zamenjava vseh kablov in kabelskih mostov v območju obdelave - menjava celotnega pnevmatskega sistema - menjava celotnega hladilnega sistema - menjava vseh servomotorjev osi - generalna obnova vseh vreten motorjev - obnova glavnega in kontrolnega vretena - zamenjava rotirajoče vodilne puše in sinhronskega pogona - obnova krmilja Fanuc in servo ojačevalnikov - močnostni elementi, delna menjava električnih komponent Opis TEHNIČNI PODATKI - Število osi: 8 - Število vreten: 2 GLAVNO VRETENO - Največji premer materiala: 25,4 mm - Največja dolžina obdelave: 220 mm - Hitrost vretena: 10.000 rpm - Moč glavnega vretena: 3,7 kW (5,5 kW) - Natančnost indeksiranja C-osi: 0,1° KONTRA VRETENO - Največji premer materiala: 25,4 mm Itjdouq A T Sepfx Ah Aor - Hitrost vretena: 10.000 rpm - Moč kontra vretena: 1,5 kW (2,2 kW) - Natančnost indeksiranja C-osi: 0,1° PREČNI SANIK 1 - Število pozicij: 5 PREČNI SANIK 2 - Število pozicij: 5 - Število motoriziranih pozicij: 4 - Hitrost pogonskih orodij: 8.000 rpm - Moč pogonskih orodij: 1,5/2,2 kW ENOTA ZA ZADNJE OPERACIJE - Število pozicij: 4 - Število motoriziranih pozicij: 4 - Hitrost pogonskih orodij: 6.000 rpm NAPAJANJE - Napetost: 400 V - Skupna instalirana moč: 14 kW TEŽA IN DIMENZIJE - Tloris stroja: 2.270 x 1.650 mm - Višina stroja: 2.200 mm - Teža stroja: 3.500 kg OPREMA - CNC krmilje: Fanuc - Pogon rotirajočih orodij na: S2, S3, S5 horizontalno (8.000 1/min 1,5/2,2 kW) - Rotirajoča vodilna puša (sinhronizirana) - Lovilec kosov - Izmet končanega obdelovanca - Rezervoar za hladilno sredstvo - Dovajalnik palic LNS ALPHA 320S Dodatno: Naprava za izmet dolgih kosov (maks. dolžina obdelovanca 700 mm) Odvzem dima oljne megle – SEI EMC 1000 s podstavkom ali ELBARON RON 100 D2TR Stroj je skoraj v celoti obnovljen in je v brezhibnem, praktično novem stanju. Opremljen je z izmetom za dolge kose in novim dovajalnikom palic LNS. Po želji ga lahko opremimo tudi z lovilcem oljne megle ter drugo dodatno opremo, ki jo prav tako lahko zagotovimo. Za dodatne informacije in slike nas kontaktirajte. Stroj si lahko po predhodnem dogovoru ogledate v obratovanju na naši lokaciji na Madžarskem.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 760 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, teža obdelovanca (maks.): 12.000 kg, skupna višina: 48.500 mm, skupna dolžina: 85.800 mm, skupna širina: 56.000 mm, širina mize: 2.400 mm, dolžina mize: 3.020 mm, skupna masa: 20 kg, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 6.000 obr/min, razdalja od središča mize do nosu vretena: 960 mm, nos vretena: ISO 50, dolžina orodja: 350 mm, premer orodja: 127 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Portale verticale Bearbeitungszentrum "AWEA LP-3025" Itodpfxorl Svre Ah Asr

Stanje: dober (rabljeno), Leto izdelave: 2024, Welding turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via crank gear motor 0 – 90° Speed: 0.3 – 2.5 rpm Incl. foot remote control Isdebvk I Ejpfx Ah Aetr Surcharge: Quick-release chuck Diameter: 300 mm, €450