SUMITOMO SHI DEMAG El-Exis S 250/630-1450
Sumitomo (SHI) Demag El-Exis S 250/630-1450

Name: Sumitomo (SHI) Demag El-Exis S 250/630-1450
Brand: Sumitomo (SHI) Demag
Availability: InStock

Leto izdelave

2005

Stanje

Rabljeno

Lokacija

Nemčija

SUMITOMO SHI DEMAG El-Exis S 250/630-1450 Sumitomo (SHI) Demag El-Exis S 250/630-1450

Sumitomo (SHI) Demag El-Exis S 250/630-1450

Podatki o stroju

Oznaka stroja:: SUMITOMO SHI DEMAG El-Exis S 250/630-1450

Proizvajalec:: Sumitomo (SHI) Demag

Model:: El-Exis S 250/630-1450

Leto izdelave:: 2005

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20705710

Referenčna številka:: DE-INJ-SUM-2005-00001

Posodobitev:: nazadnje dne 19.01.2026

Opis

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information.

• 5 similar units available
• Central accumulator for high-speed injection; core, ejector, and nozzle movement
• Nozzle movement parallel to mould movement
• Chrome-plated tie bars at the clamping unit
• Pump drive power: 22.0 kW
• Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE
• Separate power connections for drive and heating
Gsdpfx Aox D Rqrsdkouf
• Control system: colour data display with VGA interface and AT keyboard interface
• Injection, holding pressure and back pressure via servo valve
• Reinforced oil cooler
• Separate water connections for mould and oil cooling
• Compliance: basic European version, conforms to applicable safety regulations
• Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD
• Elastic machine suspension
• Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis
• Reduced centring diameter (D=100/125) for the fixed platen
• Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate
• Standard mould installation height
• Safety interlock: mould opening and ejector forward only with safety gate closed
• Ejector with position control via proportional valve; pressure and speed can be programmed independently
• Frequency-controlled electric screw drive

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.255 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Sporočilo*

Ime*

E-pošta*

Telefon

Podjetje

Poštna številka in krajZemljišče

Sem trgovec

Prejmite ponudbe za podobne stroje

Opomba: Vaše povpraševanje bo posredovano vsem prodajalcem v kategoriji strojev. S tem lahko prejmete zelo veliko ponudb.

Izjava o varstvu podatkov

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

VERTIKALNI OBDELOVALNI CENTER DOOSAN DNM 4500

Cuggiono

485 km

VERTIKALNI OBDELOVALNI CENTER
DOOSANDNM 4500

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 450 mm, pomik po osi Z: 510 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: HEIDENHAIN TNC-620, skupna višina: 2.500 mm, skupna dolžina: 3.600 mm, skupna širina: 2.500 mm, širina mize: 1.000 mm, dolžina mize: 450 mm, obremenitev mize: 600 kg, skupna masa: 5.000 kg, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, nos vretena: ISO 40, število vreten: 1, število mest v zalogovniku orodij: 30, dolžina orodja: 300 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljeni vertikalni obdelovalni center "DOOSAN DNM 4500" s CNC upravljanjem Heidenhain TNC-620 Gedpfxsw D Dy Nj Adkjuf

Poglej podrobnosti

Mali oglas

Dvoranski mostni žerjav ± 11.550 mm x 5.000 kg Demag EPKE

Maarheeze

895 km

Dvoranski mostni žerjav ± 11.550 mm x 5.000 kg
DemagEPKE

Pokliči

Mali oglas

Stroji za brizganje plastike ARBURG 320 C 500 - 170

Nemčija

650 km

Stroji za brizganje plastike
ARBURG320 C 500 - 170

Pokliči

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Ponujata sta 2 brizgalna stroja, letnika 2008 in 2009. Zapiralna sila: 500 kN, razdalja med vodili X/Y: 320 mm/320 mm, vpenjalne plošče za orodja X/Y: 446 mm/446 mm, hod odpiranja: 350 mm, maksimalna razdalja med ploščami: 550 mm, brizgalna enota 170: premer polža: 25 mm-30 mm, volumen hoda: cca. 59 ccm/25 mm polž, cca. 85 ccm/30 mm polž, masa brizga: cca. 62 g do 77 g, brizgalni tlak: do 2500 bar. Ogled je možen po dogovoru. Guedsx I Rqcjpfx Adkof

Poglej podrobnosti

Mali oglas

2006 Biesse Rover B 2.30 Biesse Rover B 2.30

Sesto Calende

494 km

2006 Biesse Rover B 2.30
BiesseRover B 2.30

Pokliči

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Godpfxsv Aacfs Adksuf Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Poglej podrobnosti

Mali oglas

Vertikalni stroj za brizganje ENGEL e-insert 740H/60 single-C

Berlin

713 km

Vertikalni stroj za brizganje
ENGELe-insert 740H/60 single-C

Pokliči

Mali oglas

Črpalke Sauer, Sauer - Siro - Črpalke Sauer - Siro - Sundstrand

Rinteln

796 km

Črpalke Sauer, Sauer - Siro - Črpalke
Sauer - Siro - Sundstrand

Pokliči

Mali oglas

Demag Concept 250/630-1450 (leto 2006) Demag Concept 250/630-1450

Trenčianske Stankovce

375 km

Demag Concept 250/630-1450 (leto 2006)
DemagConcept 250/630-1450

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Gsdpfsrgw Exsx Adkouf Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Poglej podrobnosti

Mali oglas

Stroj za brizganje ENGEL ES 2050 - 400 HL

Eschweiler

826 km

Stroj za brizganje
ENGELES 2050 - 400 HL

Pokliči

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4 kN, premer vijaka: 70 mm, Offer details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control system: CC200 Display language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 4,000 kN Platen size (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Max. opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power, pump motor: 45 kW Dimensions and weights: Installation space approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Oscillation dampers - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional equipment: Godpfx Asu Awaljdkouf - Robot interface - 4 x hydraulic core pulls

Poglej podrobnosti

Mali oglas

SEW Eurodrive pogonska transportna tehnologija SEW-EURODRIVE Art Nr. SEW01

Krefeld

843 km

SEW Eurodrive pogonska transportna tehnologija
SEW-EURODRIVEArt Nr. SEW01

Pokliči

Stanje: dober (rabljeno), Tehnični podatki: Pogonski motorji / Motor Količina: na voljo 4 kosi Proizvajalec: SEW Eurodrive Stanje: dobro (rabljeno) Moč: 50Hz / r/min 1461/228 kW 1,5 S1 Rešitve po meri za vašo intralogistiko Za valjčne proge, tračne transporterje, poševne transporterje ali teleskopske naprave za nakladanje in razkladanje vašega blaga smo vaš kompetenten partner! Z veseljem pripravimo individualno ponudbo ali svetujemo pri načrtovanju in montaži. Sporočite nam vaše potrebe in lokalne pogoje. Izkoristite naša dolgoletna izkušnja in odlično mrežo strokovnjakov. Za podjetja iz različnih panog, kot so logistika, farmacevtska industrija, obrt ali elektronika, smo že uspešno realizirali projekte. Guodpfxof N Hdxs Adkef Skupaj bomo poiskali načine za stroškovno učinkovito in trajnostno optimizacijo vaših procesov in materialnega toka. Poleg tega lahko ponudimo tudi popolnoma avtomatsko sortirsko tehniko ali dodatne komponente, kot so regalni sistemi za komisioniranje ali zabojniki.

Poglej podrobnosti

Mali oglas

Vertikalna večstopenjska visokotlačna centrifugalna črpalka, skoraj nova centrifugalna črpalka kot d GRUNDFOS CRN 10-09 MP-FGJ GI-V

Hessisch Lichtenau

682 km

Vertikalna večstopenjska visokotlačna centrifugalna črpalka, skoraj nova centrifugalna črpalka kot d
GRUNDFOSCRN 10-09 MP-FGJ GI-V

880 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Gjdpfx Adsfupadekouf Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump

Poglej podrobnosti

Oglašujte tukaj