Optimizirna čelilna žaga Stromab TR 500 2022

Stromab TR 500

Stanje: novo, Leto izdelave: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined by 8° Technical features of the cutting unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400 V / 50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE ON LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful feed motor for package weights up to 80 kg Maximum feed system speed: 90 m/min Pneumatic pusher lift at end of cutting cycle and overhead return. Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycles (patterns) and input them directly on the controller Transfer cutting lists created on a PC via USB or Ethernet port Operating software: Manual input of loading board length Partial optimization without reading finished lengths Cutting cycle with 3 optimization options (maximum length, sequence, board sequence) Up to 1,000 cutting lists with 11 dimensions each, or a single list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length detection by photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) Redpfx Agjhw Ng Is Top "OPTI PLUS" package: complete optimization including knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent crayons/pencils (Note – Only orderable in combination with ZA250) Pneumatic side clamping device Software for creating lists on PC in XML format

Stanje: rabljeno, Leto izdelave: 2005, skupna višina: 1.750 mm, skupna dolžina: 1.350 mm, skupna širina: 1.350 mm, Optimirna čelilna žaga Stromab TR 500 Matrix 4 4000 Letnik proizvodnje: 2005 Moč motorja: 10 KM Rjdpfxewq U Dxs Ag Top Auto-Push-Up sistem Inkjet tiskalnik - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 250143 - Moč glavnega motorja [kW]: 7.5 - Največja širina reza [mm]: 375 - Premer gredi žaginega lista [mm]: 30 - Dolžina dovajalne mize [mm]: 4300 - Dolžina izhodne mize [mm]: 2000 - Transportne mere: 1350mm x 1350mm x 1750mm (d x š x v) - Število transportnih paketov [kos]: 3 Finančne informacije DDV: Navedena cena je brez DDV DDV/Obdavčitev po diferenčni shemi: DDV odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 Rjdpfx Ajv A Htdsg Top - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: rabljeno, Leto izdelave: 2016, skupna višina: 1.600 mm, skupna dolžina: 14.100 mm, skupna širina: 1.600 mm, Teža: 2.500 kg - Leto izdelave: 2016 - Dokumentacija na voljo: Da - CE označba prisotna: Da - CE certifikat na voljo: Ne - Serijska številka: 6237 - Napetost [V]: 415 - Poraba toka [A]: 20 - Transportne mere: 14100mm x 1600mm x 1600mm (D x Š x V) - Transportna teža [kg]: 2500kg - Transportni paketi [kos]: 4 Rodpfx Agjwnh N Nj Tjp Finančne informacije DDV: Prikazana cena ne vključuje DDV DDV/obdavčitev razlike: DDV je odbitno za podjetja Dostava in odkup so možni kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideally suited for precise and efficient cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Secure palletised shipping by freight carrier available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 Rsdpfjxiza Uex Ag Top 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to changes and errors.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1377, STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE STANDARD – USED - Equipped with TIGERSTOP electronic positioning stop, 4000mm - Infeed roller table, 4500mm - Outfeed roller table, 4500mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (width) x 60 mm (height), 135 mm (height) x 280 mm (width) - Motor: 10 hp Rodpfjt U Izpjx Ag Top - 415 volt - Serial no.: 1377 - Year: 2007