Avtomatski pozicionirni drsnik za kapno žago

STROMAB STROMAB-STOP 4500

Leto izdelave: 2025, Stanje: novo, številka stroja/vozila: Neumaschine auf Bestellung, Description: - Screening deck system consisting of 1 deck for screening minerals from pre-crushed material; maximum input grain size: 0–100 mm - Screening cut size: 0–30 mm - Throughput approx. 60 m³/h (material dependent) - Material separation into 2 fractions: 0–30 mm and oversize - To be mounted on customer’s own impact plates or subframe Technical Data: Gkedpfx Aod Rbmksb Tof  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area 4.6 m², number of shafts: 24 units o Drive: 2 x 4.0 kW gear motors o Screening body made of polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adjustment to other grain sizes possible) o Bearing lubrication routed to the outside; central lubrication system available as an option at extra cost  Colour: black RAL 9017 / green RAL 6018 or according to customer specification (at extra cost) Delivery time: approx. 20 weeks

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec paketna kapna žaga Vario Cut z Holtec mehanizacijo. Jörg Elektronik. Popolna odstranitev pod kapno napravo. Gedpfx Abjw Smz Dj Tskf

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Godpfx Aswtgcxjb Tekf Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete Weinig planing line consisting of: - Package infeed, automatic tilt destacking, baton separator. - Cross conveyor with reject separation. - Conveyor feed to twin band saw, singulation before planing machine infeed. - Throughfeed cross-cut saw, infeed to the planing machine. - Weinig 22 B planing machine with 8 spindles; electronic frequency-controlled feed up to 80 m/min. - In 2023, the planing machine was equipped with a new frequency-controlled feed unit, new table, and new wear plates. - Outfeed from the planing machine; Weinig stacking unit with lath magazine, as well as Almab stacking system. The entire planing line is fully mechanized. Specifications: - Wood length: 2.0 – 6.10 m Gjdpfxewvqvbe Ab Tjkf - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm - Package size input: 1.20 x 1.30 m; output: 1.20 x 1.20 m (W x H) Well-maintained system with regular servicing.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 100 mm, največja širina rezanja: 245 mm, delovna višina: 100 mm, vrsta vhodnega toka: trifazni, – Year of manufacture: 2001 – Optimization – Defect cutting (cut-to-length) – The machine is equipped with additional tables, enabling a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists TECHNICAL PARAMETERS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min Gjdpfx Aswtzrhsb Tjkf – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material hold-down – Five ejectors – Intelligently controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Oprema: T 7300/2, T 7301 (precizna nastavitev za paralelni prislon), T 7302, T 7309/2, T 7330 (fiksna skala), T 7337 (analogni prečni prislon z neprekinjenim poravnavanjem), premer žaginega lista: 250-500mm, število vrtljajev: 2800/4000/5500/min, največja višina reza: 80mm, širina reza: 850mm, kot nagiba žaginega lista: 0-46°, dolžina pomične mize: 3000mm, priključna moč: 4kW, teža: 1,65t. Možen je ogled na lokaciji. Gjdpsw S Txvsfx Ab Tjkf

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, delovna višina: 900 mm, pogonska enota žage: 7.500 W, pivoting chainsaw at 45° equipped with a 6-meter pusher Gkjdpfxjwzg E Ns Ab Tof unloading deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen

Stanje: zelo dobro (rabljeno), Beam Cutting Center STROMAB CT800 Gkjdpfx Abswtw Avj Tjf Cutting center for large cross-section beams – an optimal solution for woodworking and timber frame construction. Thanks to electronically controlled 5-axis technology, it meets all requirements for straight, angled, and compound cuts. Ensures maximum processing speed and finished product quality, reducing labor input and maximizing output. The CT800 can process beams of any length with cross-sections from 120×45 mm up to 290×280 mm. The beam feed system features driven rubber wheels and pneumatically tilted top hold-downs. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18'' Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table feed and repeated cuts: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table feed and repeated cuts: mm 200×760 Max. longitudinal cutting height: mm 300

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 89257, Žaga GreCon Dimter Opticut 704 L iz leta 1999. Stroj odstranjen iz obratovalne linije. Brez izmetnikov na izhodu, potreben ponoven vklop ali retrofit. Na ogled v naših prostorih. Gkodotvahlopfx Ab Tof

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, največja višina reza: 200 mm, dolžina podajanja os X: 420 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, moč: 5,5 kW (7,48 KM), višina obdelovanca (maks.): 200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Godpfxsv Hhg Te Ab Tokf Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame.