Linija za robove in obdelavo

STEFANI - MAHROS EVOLUTION SB ONE

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin Kdedpfxedh Tfgs Ah Uju FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding Kedpfjrx S Ipjx Ah Ujdu max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Kdjdeifnzdepfx Ah Usu Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, FOM Industrie ARGO 70 3-Axis CNC Machining Center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis (top only): 6,780 mm X-axis (top + heads): 6,630 mm Y and Z axis for machining on upper and rear sides: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Kodpelu E Naefx Ah Ujdu Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer positions: 12 POSITIONING AND CLAMPING Clamping fixtures with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of clamping devices: 8 MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW Axis X speed: 100 m/min FEATURES - Multi-piece machining - Tool clamping system - Pendulum mode - Minimum quantity lubrication - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool magazine with 12 positions at the head - Operator terminal with PC - 23” monitor - 3D visualization for FomCam

Stanje: rabljeno, številka stroja/vozila: 005601, Vrsta pritrjenega roba: tanek rob, močan rob Lepilni sistem: EVA, PUR Spojno rezkanje: da Večnamenska enota: da Kdodop E I Uajpfx Ah Uou Zgornja rezkalna enota: da Maks. podajalna hitrost: 40 m/min Največja debelina plošče: 60 mm Delovne enote: 15 kos