Šestosni industrijski robot Stäubli RX160

Stäubli RX160 / RX160L

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Two Stäubli robots, including controllers and stands, are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, nominal/max. payload: 14kg/28kg, reach: 2010mm, repeatability: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52,000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation is available. Inspection on site possible. Pedewt Tltjpfx Agpsgw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2600-107872, skupna masa: 1.000 kg, nosilnost: 12 kg, proizvajalec krmilnikov: ABB, model krmilnika: IRC5 Single, vhodna napetost: 400 V, vhodni tok: 9 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of manufacture: 03/2017. Axes: 6, Payload: 12 kg. Total weight: 1,000 kg (850 kg robot arm incl. base + 150 kg control cabinet). Pedpfx Agjucxx Hepsgw Control cabinet: ABB IRC5 Single. Used, complete, in very good condition, inspected and available for demonstration. (For further details, please see the type plates.) We also offer accessories such as bases, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot as well. Packaging and loading included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 56.000 h, Naprodaj: brizgalni stroj Arburg 570-2000-800, letnik 2008. V zelo dobrem tehničnem in vizualnem stanju, zelo tiho delovanje, brez puščanja olja. Upravljanje Selogic. Bimetalni brizgalni sistem Fi 45 mm. 1 x zrak, 2 x hidravlično jedro. Izhod za robota. Stroj se prodaja brez dovajalnika materiala in barvila. Pedpoukirbjfx Agpsgw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes Podpfxort Ip Ns Agpegw 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Pgsdpfx Ageia Rtdepjw Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 19780, Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 375 mm Spindle speed range: 1,000 – 3,000 rpm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 2.8 – 8.4 kW Machine weight approx.: 3.5 t Podpscxxrzofx Agpegw CNC-controlled surface grinding machine with 3D-controlled profile dresser, ELB CNC control unit Unicon with integrated electronic handwheel, monitor, analogue spindle load indicator, infinitely variable cross feed, coolant system with magnetic roller separator, full enclosure, separate control cabinet, additional grinding wheel with flange.

Stanje: dober (rabljeno), Robot Pgodpebrhtdofx Agpow Proizvajalec: Staeubli Tip: RX170 251125ä

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter Psdpfx Ast Tqrnogpjgw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, KUKA KR10 R1100 Sixx KRC4 including control panel, cables, and control cabinet. 15,700 operating hours We can also offer you the robot fully reconditioned upon request! 2 additional units available with: Psdemdrpvepfx Agpsgw 16,500 operating hours 16,000 operating hours

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: Pedpfx Agerz Nflopsgw - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.