Stäubli TX2-90

Stäubli TX2-90

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna masa: 730 kg, nosilnost: 14 kg, doseg roke: 1.000 mm, ROBOTIC ARM Payload: 14 kg Maximum reach (between axis 1 and 6): 1000 mm Repeatability - ISO 9283: ±0.03 mm ROTARY UNIT Maximum rotation angle: 350° Safe positions: 0° / ±90° / 180° DRIVE UNIT Maximum speed: 16.8°/s Tool depot: 4 tools per station Tool changer system: MPS032 Ndsdotqmihepfx Af Hjd Maximum speed: 0.6 m/s Platform positioning accuracy: ±10 mm, 1° Dimensions (without robotic arm): 890 x 1120 x 1000 mm (W x H x D) Number of laser scanners: 3 (360° surveillance area) Scanning plane height (person-safe): 150 mm Drive type: Differential drive COMPLETE SYSTEM Navigation: based on laser scanner data Protection class wrist/arm/entire system: IP67 / IP65 / IP20 Max. average ground pressure: 10 N/mm² Power supply: 1 x 230 V / 16 A Interfaces: WLAN, LAN, Fieldbus (1) Multi-coupling: Compressed air, power supply, 2x Cat5e, 26 x 1 mm² contacts Battery capacity: 5.8 - 8.7 kWh Compressed air tank: 0.75 l (2) / 7 bar Visual & acoustic indicators: 4 LED units, storage for up to 16 audio files Weight: 730 kg

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Nedpfjfz I Ehex Af Hedd Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 550 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F/20/0020976/A/001, Maksimalna nosilnost: do 14 kg Doseg: 1000 mm Število prostostnih stopenj: 6 Ponavljivost: ± 0,02 mm Pnevmatični priključek: 2 neposredni liniji med osnovo in podlaktnim delom 2x bistabilni magnetni ventil 5/2 poti (stisnjen zrak) Električni priključek na roki: 17 električnih I/O vodov Multibus kabel v roki: 13 električnih vodov, 4 multibus Cat5e vodovi, DIN M12 Standardi in zaščitne stopnje: Standard za čiste prostore – ISO 14644-1: raven 5 Zaščitni razred (zapestje): IP65 / (IP67 s tlačno enoto) Varnost: do razreda SIL3-PLe (sodelovanje z ljudmi: varna omejena hitrost, varna zaustavitev, varno območje, varno orodje) Upravljanje in licenca: Njdpfx Afsxck Rio Hsdd CS9 upravljanje z VAL3 licenco Napajanje: 400-480V-50/60Hz Povezljivost: UPC UA / IP67 EtherCat I/O moduli za priklop dodatne opreme, zaprti Ethernet Cat5e za večprijemalnike, kamero in senzorje Horizontalni izhod kabla

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 9.965 h, - RABLJEN - 3-OSNI VERTIKALNI OBDELOVALNI CENTER Z ROTO-PALETO POMIK X-OSI: 560 mm POMIK Y-OSI: 400 mm POMIK Z-OSI: 570 mm RAZDALJA VRH VRETENA-MIZA: 210 - 780 mm HITRI POMIKI X-Y-Z: 40 - 40 - 32 m/min VRETENO: 80-10.000 min⁻¹; 15-18,5 kW; ISO 40 - BT PALETA: 2 kos.; 712 x 475 mm MAKS. DOVOLJENA OBREMENITEV: 300 x 2 kg VISOKOTLAČNO HLADILNO SREDSTVO: 15 bar MENJALNIK ORODIJ: VERIŽNI TIP; 32 POZICIJ Ndodsq Nqkxspfx Af Hsd MAKS. PREMER ORODJA: 90 (150) mm MAKS. DOLŽINA ORODJA: 300 mm MAKS. TEŽA ORODJA: 8 kg KRMILNA ENOTA: FANUC 21i - MB TEŽA: 7600 kg SKUPNE DIMENZIJE: 3010 x 3450 x 3145 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, skupna širina: 1.380 mm, skupna dolžina: 950 mm, skupna višina: 1.980 mm, vhodna frekvenca: 50 Hz, skupna masa: 258 kg, električna varovalka: 32 A, moč: 21 kW (28,55 KM), Univerzalni pomivalni stroj Hobart XL Model: UXTLS - Velikost košare: 1140 x 680 mm - Višina vstavljanja: 850 mm - Preprosti 3 programi z barvnim prikazom - Odtaljna črpalka - Dozirnik detergenta - Dozirnik sredstva za izpiranje Dimenzije: 1380 x 950 x 1980 mm (ŠxGxV) Priklop: 400V, vtičnica 32A-CEE Rabljena, očiščena naprava Ndedjwmvz Dspfx Af Hjd Možnosti: Dostavna storitev Filter za vodo Vzdrževalna pogodba Servisni paket Usposabljanje in zagon Pri nas najdete svoj pomivalni stroj!

Leto izdelave: 2002, Stanje: dober (rabljeno), številka stroja/vozila: SIKBK, DEMAG KBK Crane System – Crane Runway, approx. 10x6m Load Capacity / Lifting Capacity: 500 kg (0.5 t) Technical Data of the System: • Crane runway made of Demag KBK2 rails • System is delivered complete: KBK rails, rail connectors, trolley carriages, end stops, cable festoon system, suspension brackets/hangers, etc. • Including Demag DK2 500 kg chain hoist Crane is dismantled and immediately available. Njdpsmqf Nbofx Af Hsdd Used condition, see photos. Item location: 75053 Gondelsheim Shipping via freight carrier or pick-up by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available: load capacities from 125 kg to 1600 kg. Please inquire about your required crane runway with overhang and dimensions.

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Ndedpfx Afjia Rtde Hsd Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Nedpsrt Ip Nofx Af Hsdd Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: dober (rabljeno), Robot Proizvajalec: Staeubli Ndsdpebrhtdjfx Af Hjd Tip: RX170 251125ä

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: Ndjdpewl Ag Djfx Af Hod Turning diameter: 670 mm Turning length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Max. swing diameter over bed cover: 700 mm Travel paths turret no. 1 (milling spindle) x/y/z: 495 / ±150 / 1562(+164) mm B-axis rotation: -30° / +210° Rapid traverse turret 1 (milling head) x/y/z: 40/40/40 m/min Milling spindle speed: 12000 rpm Drive power – milling spindle: 20.2/18.8 kW Torque milling spindle: 120 / 44 Nm Tool interface milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool-to-tool, milling spindle: 1.25 s Spindle 1 speed: 3000 rpm Spindle 1 power: 36 / 30 / 25 kW C-axis spindle 1: 0.001° Bar capacity spindle 1: 102 mm Spindle 2 speed: 4000 rpm Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0.001° Bar capacity spindle 2: 80 mm Space requirement approx.: 7.8 x 3.6 x 2.9 m Linear glass scales on axes: X, Y Programmable steady rest: KLU-A530 & SLU-X3.2 Accessories: Chip conveyor Tool measurement Spindle load monitor Air blow system Air blow system through ICS system to the tool Spindle 1 power chuck Kitagawa 250 (B 210) mm Spindle 2 power chuck Kitagawa 250 (B 210) mm Interface for internal coolant supply 70 bar Tailstock specification for sub spindle Workpiece measurement with Renishaw OMP60 probe Detachable handwheel Workpiece and total counter Three-color signal lamp Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear viewing window Quick clamping cycles Program restart Four-color signal lamp Ethernet I/P interface Manual tool measuring arm Automatic door Oil mist separator Oil skimmer Spindle touch probe for workpiece measurement External air blow system sub spindle Spindle 1 coolant nozzle Spindle 2 coolant nozzle Coolant gun Internal coolant supply 70 bar with Knoll filtration A high-spec CNC turning and milling center with sub spindle, which can also be used with tailstock functionality. The machine has an automatic door and Matris Robot System type R-2000iC/165F.