Zabojnik za zlaganje Kovinski zabojnik

SSI Schäfer / Feuerverzinkt / 3 Stück / Abm.: 850x550x670mm (BxTxH) / 4 Kranösen

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm Godpfx Afjh Ek Dajqsbg = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 80 kg, skupna širina: 990 mm, skupna višina: 870 mm, skupna dolžina: 1.180 mm, višina zlaganja: 800 mm, kapaciteta rezervoarja: 900 l, lastna masa: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking containers, storage bins, made of galvanized sheet steel. Manufacturer unknown Dimensions of the stacking container (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height of the box: 700 mm Box capacity: approx. 0.9 m³ Weight: approx. 80 kg each Note: The steel stacking containers were previously used on construction sites by the former owner as containers for sorted construction waste. Emptying into larger transfer bins/containers was carried out using a forklift with rotating forks. For this reason, the stacking containers were manufactured with extra heavy-duty walls. Gbsdpfxovtckms Afqeg Sale is subject to change without notice and is made to commercial customers only, excluding any warranty or guarantee. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Gbodpfomhhypox Afqog The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Gbjdemkixwopfx Afqog According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Solid round material 30 / 900 mm Solid square material 30 / 900 mm Angle steel 35X35X5 / 600 mm T-steel – web outwards 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roller diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirements approx. 0.75 x 0.6 x 1.4 m Electric profile bending machine - Optional horizontal or vertical operation - 1 set of hardened standard rollers - Lower 2 rollers are driven Gedpjq Adtqofx Afqjbg - 1 set of plastic rollers for diameter 33.7mm/1" - Operating manual - Foot switch for left/right and emergency stop

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation Gjdpsmhhyasfx Afqebg - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) Godpfsmhh Dzox Afqsbg - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: novo, številka stroja/vozila: 85162, System: Electrohydraulic Piston Diaphragm Pump (Feeding pump / Filling pump) NEW! Type: Abel CM-G-C262 ID No.: 85162-3 Flow Rate: 10 m³/h Motor Power: 5.5 kW Motor Speed: 1450 rpm Piston Diameter: 130 mm Suction Side Connection Flange: DN 80 PN 16 DIN 2633 Discharge Side Connection Flange: DN 80 PN 40 DIN 2635 Application: Filter Press Feeding Gbsdsd E S Sfepfx Afqsg Suction Flow Stabilizer: Steel construction Suction Crossbeam: 262, steel Other accessories: such as drain valve, pressure gauge, etc. Picture: similar design The Abel hydraulic diaphragm simplex piston pump, horizontal design, is double-acting, slow-running, self-priming, and capable of dry-running. The pump's flow rate is efficiently controlled according to discharge pressure via a frequency converter with speed-controlled drive, optimizing energy usage. We also offer our piston diaphragm high-pressure pumps in special tunnel construction versions. Do you have specific requirements? Contact us for individual solutions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 3.970 h,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2X387L00867, Leto izdelave: 2022, obratovalne ure: 1.108 h, nosilnost: 2.300 kg, dvižna višina: 4.400 mm, prosto dvigovanje: 1.320 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.090 mm, širina nosilnega okvirja vilic: 1.150 mm, dolžina vilic: 1.100 mm, lastna masa: 3.702 kg, skupna dolžina: 2.350 mm, vrsta pogona: Elektro, gradbena širina: 1.150 mm, Electric 4-wheel forklift Chassis number: H2X387L00867 Gbedpfxowz S Dwe Afqeg Load centre: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyre size: 23x9-10 Front tyre condition: 80 - 100% Rear tyres type: Superelastic Rear tyre size: 200/50-10 Rear tyre condition: 60 - 80% Battery voltage: 80V Battery capacity: 460Ah Battery manufacturer: Linde Battery type: PzS Battery year: 2022 Battery condition: 60 - 80% Description: The unit is fully functional and comes with the latest safety inspection (UVV). A charger is integrated into the forklift. Slight reddish discoloration due to previous use in metalworking. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, full cabin, full free lift, interior mirror, rotating beacon,