OBLOGA ZA VLAK (REVERSE)

SORBINI T/20 - MR Reverse

Stanje: zelo dobro (rabljeno), ROLL COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length: approx. 1600 mm Integrated control cabinet with operator panel Powered conveyor carpet for workpiece feed (with servo drive, approx. 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load: approx. 4.1 kW With 2 working units: * 1st unit (with 2 rollers) - Dosing roller made of chrome steel, diameter 174 mm Gsdeidqwpjpfx Adkjuf - Application roller with rubber coating, diameter 248 mm - Equipped with 2 speed regulators (motor power 0.37 kW + 0.75 kW) - Lower counter roller with rubber coating * 2nd unit (with 2 rollers) - Dosing roller made of chrome steel, diameter 174 mm - Application roller with rubber coating, diameter 248 mm - Equipped with 2 speed regulators (motor power 0.37 kW + 0.75 kW) - Lower counter roller with rubber coating

Leto izdelave: 1980, stanje: dober (rabljeno), Stellite Tipping Machine VOLLMER GF10U Blade thickness: 1 to 4 mm Band saw blade width: 60 to 420 mm Circular saw blades: 300 to 1,200 mm diameter Gujdpfx Adegxb Ebjkef Electric feed drive via geared motor

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.000 mm, skupna širina: 3.500 mm, skupna višina: 2.950 mm, notranja višina: 2.650 mm, notranja dolžina: 4.900 mm, notranja širina: 3.400 mm, Oprema: kabina, Vehicle Spray Booth The vehicle spray booth is a fundamental piece of equipment for paint repair technology. It allows paintwork to be carried out under safe and comfortable conditions while minimizing negative impacts on both the surrounding area and the environment. Technical specifications: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Drive-through gate: 3000 × 2600 mm (triple-winged) - Service door: 700 × 2000 mm - Structure: made from steel sheet - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Booth wall structure: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Booth floor: - Booth mounted directly on floor / concrete slab Double ceiling: - Outer ceiling panel - Full-length plenum above the ceiling area for supply air Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units Gusdpfx Asxnpczodksf - Air capacity: 26,000 m³/h - Exhaust air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heat-up time: 8–15 minutes Filtration system: - Double-layer filter structure - High-performance air purification system with up to 99% filter efficiency

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Guedpfx Aoug Ty Hjdkjf Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Panel saw for acrylic glass (Plexiglas) and wood panels with extraction unit Very good condition! Maximum cutting height: 2200 mm Maximum cutting length: 4200 mm Maximum cutting thickness: 60 mm Length: 5600 mm Depth: 1400 mm Guedpfx Adjinunqeksf Height: 2900 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Gsdpfx Adefi Tg Hskouf Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Gujdpfxjw A A E Ie Adkof Maximum length: 2500 mm

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Guodpek Nn Iljfx Adkef

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Gusdpsrqzgkofx Adkjf Maximum press output: up to 2000 m² / 7.5 hours Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Guodpfeuc Idxjx Adkjf Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels