Ekscentrični pritisk - enojni stolpec

SMERAL LEN 63 C

Stanje: rabljeno, Technical Details: Pressing Force: 63 t Throat Depth: 315 mm Ram Adjustment: 60 mm Stroke Adjustment: 70 mm Ram Stroke: 10 - 105 mm Strokes per Minute: 71 - 140 spm Single Stroke Rate: 45 / 50 spm Clearance Between Side Frames: 355 mm Installation Height: 335 mm Table (W x D): 800 x 630 mm Pass-through Opening in Table: 400 x 130 mm Clamping Plate (W x D): 616 x 85 mm Ram Clamping Surface (W x D): 450 x 280 mm Ram Bore: Ø 50 x 83 mm Total Power Requirement: 7.5 kW Machine Weight approx.: 5.9 t Control Cabinet Dimensions (L x W x H): 0.86 x 0.30 x 1.3 m Dsdpfxjvt Nvpo Aa Hscr Machine Dimensions approx. (L x W x H): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feed/coil line and straightening machine Application: suitable for series production Equipped with servo roller feeder MINI: tested until 01/2021 - Manufacturer: P/A GmbH, Type SRF 220 - For strip width up to 220 mm - Feed rate: 150 m/min - Manual operation device included Straightening System: - Manufacturer: Wanzke, Type KS 150 - Max. Strip Infeed Width: 200 mm - 2 powered infeed rollers - 4 driven straightening rollers (top), vertically adjustable approx. 30 mm - 5 driven straightening rollers (bottom), fixed, not adjustable Decoiler = Custom Design: - Mechanical/manual - Max. outer diameter: Ø 1,500 mm - Max. inner diameter: Ø 300 mm - Max. width: 200 mm Roller Table: - Roller system with 9 roller rails, 53 rollers in total (Ø 25 x 25 mm)

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Dedpfx Aaeifk Rbe Hecr Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Stanje: dober (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 63 t, LEN63C lis Dedpsu Nkfuefx Aa Hecr

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, skupna višina: 25.500 mm, širina mize: 800 mm, dolžina mize: 630 mm, nastavitev hoda: 105 mm, skupna širina: 14.250 mm, skupna dolžina: 17.900 mm, skupna masa: 5.850 kg, stiskalna sila: 63 t, vrsta nastavitve višine: mehanski, moč: 7,5 kW (10,20 KM), LEN 63C Eccentric Press Year of manufacture: 1989 (SMERAL TRNAVA, Czech Republic) Technical data: - Pressing force: 63 tons - Number of strokes in automatic mode: 65/130 strokes per min Dcjdpetzxdzofx Aa Hsr - Number of strokes in manual mode: 45/50 strokes per min - Slide stroke adjustment: 10–105 mm - Slide stroke: 70 mm - Table size: 800 x 630 mm - Slide size: 450 x 280 mm - Throat depth: 315 mm - Clearance (table to slide): 335 mm - Clearance between columns: 355 mm - Number of speeds: 2 - Motor speed: 730/1440 rpm - Motor power: 4/7.5 kW - Press dimensions: 1425 x 1790 x 2550 mm - Weight: 5,850 kg Condition of the machine: good. The machine can be inspected and tested under power.

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: Dcedpfxod Nl E Uj Aa Hjr - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Pressing force: 63 t Strokes per minute: 65 / 130 spm Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table/ram: 335 mm Clearance between uprights: 355 mm Bolster plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Dsdpfx Aaeu N Dafo Hscr Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Machine dimensions (LxWxH) approx.: 1.42 x 1.8 x 2.6 m Press with tilting frame (25°) and combined stroke and overload protection (nominal load exceeded) equipped. Available operating modes: Single stroke by foot actuation (slow and inching mode) and/or by manual actuation (slow) Continuous stroke by foot actuation (slow and fast) and/or by manual actuation (slow and fast)

Stanje: dober (rabljeno), številka stroja/vozila: 2852, Leto izdelave: 2006, nosilnost: 8.000 kg, dvižna višina: 5.000 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 150 mm, dolžina vilic: 1.600 mm, skupna dolžina: 4.120 mm, skupna širina: 2.220 mm, dodatne značilnosti opreme: Weight system, Fire extinguisher , Dual tread, Oprema: osvetlitev, TCM FD80 od Uniktrucka Dodpferk Rd Nsx Aa Hscr

Stanje: rabljeno, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle rebuilders - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! The internal grinding spindle can only be switched on when in position A quantum leap in safety Dcodpfxet Ii Rro Aa Hor - Infinitely variable grinding spindle speed 1000-1500 rpm - Infinitely variable internal grinding spindle speed 0-100% - Digital display of grinding spindle speeds - Swivel angle display on the upper table - Swivel angle display on the grinding spindle headstock - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine already delivered. An identical machine can be built with additional options. The machine tool does not currently meet the essential safety and protection requirements as set out in the BetrSichV 2015. The required minimum safety objective must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Spindle speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 35 / 45 kW Maximum torque: 770 Nm Spindle head: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec Y axis: 120 (+/- 60) mm X axis: 300 mm Z axis: 1,300 mm Y axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MT 5 Clamping pressure: 1,400 daN Dcsdpfx Aovzhiwja Hjr Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tooling - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Stanje: dober (rabljeno), Leto izdelave: 2006, Technical Data – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing Diameter: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Area: 677 mm Maximum Turning Length (Z-axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute rating): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf·m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Turret: • 12 Tool Stations Dodpfxewfynfe Aa Hjcr • Tool Sizes: • External Turning Tool: Ø40 mm • Internal Turning Tool: Ø20 mm • Milling Drill: Ø20 mm • Thread Milling Tap: M12 Milling Spindle: • Speed: 25–4500 rpm (optionally 6000 rpm) • Motor Power: 5.5 kW (7.5 HP) • Maximum Torque: 35 Nm (3.6 kgf·m) Coolant Capacity: 160 liters Machine Dimensions: • Width: 1780 mm • Overall Height: 2533 mm • Floor Space Requirement: approx. 4.51 m² • Machine Weight: approx. 5200 kg 1x Chip Conveyor 1x Tray Pictures to follow shortly