Obdelovalni center

SCM Windor 60

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung Lhedpfx Aot R T Hcodksd 11. Rückführung der Werkstücke zum Bediener

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: Lhjdsfzzhyopfx Adkod - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Ljdpfx Adjwyda Uokehd Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Lsdpfet Tqy Eox Adkjhd Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Lhodex Nqqxspfx Adked Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Motor s výkonom 7,5 kW, 400 V, 50 Hz, silne rebrovaný liatinový stôl s kruhmi na stole elektronické zariadenie na rozbeh a brzdenie Ljdpfxjx Ey S Rj Adkehd elektrické nastavenie výšky a náklonu v rýchlom a pomalom režime presnosť na 1/10 mm, zdvih cca 145 mm, náklon +/- 45,5° 4 otáčky: 3 000/4 500/6 000/9 000 ot./min Frézovací doraz typ 2601 Efficient s čeľusťami multiplex definovaná frézovacia vreteno Ø 30 mm s rýchloupínacou maticou „fix“ ľavý/pravý chod, zásuvka na stroji, oblúkový bezpečnostný kryt Typ TAPOA Hofmann „Centrex“. Lakovanie: sivobiela/signalizovaná modrá rozmer stola 2 000 x 815 mm výsuvná podpera Ťažký frézovací doraz typ 2620 celkové nastavenie pomocou ručného kolesa s ukazovateľom vrátane možnosti prepnutia na nulovú hodnotu nástroja. Digitálny displej pre individuálne nastavenie čeľustí. Vrátane rýchloupínacieho systému pre čeľuste dorazu liatinové čeľuste dorazu bezpečnostné pravítka a výplňová doska vymeniteľné vreteno MK5 podávač s 4 valcami, 8 rýchlosti s podstavcom ovládací panel hore priehradka na náradie

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ACTION M okvirna preša Preša za bilo koju vrstu prozorskog sustava: prozore, rolete s letvicama, kapke i vrata od punog drva. Maks. radne dimenzije D x V 3500x2500 mm Minimalne radne dimenzije D x V 250x375 mm Maks. vertikalni/horizontalni potisak 7,4/2 tone Radna visina 480/1050 mm Snaga hidraulične pumpe 2,1 kW Ledewh T Dljpfx Adkjhd KOMPOZICIJA STROJA: ACTION M ACTION M OKVIRNA PREŠA kom 1 109831 Normativni CE prema SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frekvencija 50 Hz 1 530074 Radne površine greda obložene PVC-om 1 530075 Međuručna poprečna greda s klipom i kontra-granicom 1 530076 Hidraulički sustav za rad pod niskim tlakom 1 530077 Oprema za trapezoidne proizvode s oscilirajućom glavom za prilagodbu različitim kutovima prozorskog sustava 1

Stanje: rabljeno, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Manufacturer’s Description: Lodpfxsv D Rg De Adkohd ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! Lodpevnv Tqefx Adkehd ----- Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...

Leto izdelave: 2008, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10999, OPIS Ledpfxjv Dfp Hs Adkehd Mašina za dvostrano brušenje / aparat za brušenje odozgo i odozdo Proizvođač: Löwer Model: DSM 3000 sa povratkom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x četkasta jedinica odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x četkasta jedinica odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivo uvlačenje, 6/11/16 m/min. Priključak na komprimovani vazduh: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg