Obdelovalni center

SCM TECH Z1 PRO B

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system Hfodpfxsx D H Hco Al Toi • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia Hsdpfouu Ntgsx Al Tofi

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Hodpfjvwbp Aex Al Tsfi

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom furniture production, kitchen furniture, bathroom furniture, and various applications Drilling unit with 5 independent vertical spindles and 1 double horizontal spindle Hfodpfxjwd Irvj Al Toi Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral pop-up stops, electronically controlled, allowing the machining of panels up to 2800 x 750 mm in size with a single program and intermediate stop Capability for drilling panels up to 2800 mm Pneumatic tool shift: 60 mm Max. panel thickness: 50 mm Spindle speed: 4,500 rpm Saw rotation speed: 6,000 rpm Vacuum pump motor: 1.5 HP Suction cup diameter: 80 mm Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control system complete with interactive graphic programming, 9" video display, drilling programs, work cycle optimization, as well as graphic, parametric, and diagnostic modes Overall dimensions – Machine: 2500 x 1800 x 1800 mm (H), weight: 850 kg Overall dimensions – Control panel: 800 x 520 x 1200 mm, weight: 120 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: A3347169, Funkcionalnost: popolnoma funkcionalen, število osi: 3, CNC stroj SCM, Record 100 AL action line, 3-osna linija za obdelavo lesa, 400V, leto izdelave 16/07/2008, elektro omara, upravljanje z varnostno preprogo, pregradna stena, delovna površina 305 x 122 cm, skupna dimenzija stroja: približno 565 x 250 x 260 cm, lastna demontaža 3 osi V popolnem delujočem stanju 1 velika vakuumska črpalka z belo ploščo za detajle in 1 mala vakuumska črpalka: Leto 2019 / N°A3347169 Tip VTLF2.250/0-79 Frekvenca 50/50Hz Hitrost 950/1150min-1 Potrebna moč 5,5/6,4kW Hfsdpfx Asxg El Ajl Tei Sesalna zmogljivost 244/286m³/h Največji vakuum 200/200mbar Na voljo je video.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, število osi: 3, moč vretenovega motorja: 5.000 W, največja hitrost vretena: 24.000 obr/min, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It offers continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine features an automatic 4-position tool changer and dual "0" reference laser for precise positioning. If you are seeking high-quality CNC machining capabilities, consider the VITAP Point K2 TOP 2.0 that we have for sale. Contact us for further details. • Condition: not refurbished, no warranty • CE-compliant Machining and Axes • Continuous machining, underside processing, automatic return of the workpiece to the operator • 3 controlled axes: - X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor - Y-axis: drill head travel - Z-axis: drilling • No length limitation for the workpiece • Rear workpiece discharge Referencing and Positioning • Dual "0" reference laser (transmitter/receiver) for start/end detection; compensates for dark-edged materials • Program adaptation for bottom drilling, ensuring flush alignment for vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital display, automatic zero-stop alignment, material removal up to 3 mm on the zero line • Constant side clamping device for precise positioning on the zero line • Adjustable zero point for 4-sided formatting Tools and Heads • Automatic 4-position tool changer • 12 independent vertical spindles • Horizontal spindles: - X-axis: (2+2) - Y-axis: (2+2) • 1 saw blade (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000-24,000 rpm • Spindle speed (additional indication): 3500 rpm • Max. vertical tool diameter: 35 mm • Max. horizontal tool diameter: 12 mm • Max. vertical drilling depth: 45 mm • Max. horizontal drilling depth (X/Y): 30 mm Capacity • Max. workpiece weight: 80 kg • Max. workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min. workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm • Feed speed: 25 m/min Hfedey Hrdzjpfx Al Tei Control and Software at the Machine • 19" 5/4 TFT LCD screen • Industrial PC • WSC user interface with list, parametric tool creation, and parametric setup • CAD TPA EDI32 graphic programming, basic version • USB port • File storage • Macro programming • DXF file import Interface for Utilities and Extraction • Dust extraction airflow: 2000 m³/h • Extraction speed: 30 m/s • Extraction ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max. air consumption: 60 Nl/min • CE standards Additional Equipment • Office software - license

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, working area: 2700x1250mm Z-axis travel: 160mm rotary C axis electrospindle power: 8.5kW electrospindle speed: 24,000 rpm convenience tool magazine for 8 tools main tool magazine for 10 tools sawing aggregate on X and Y axes vertical drills on X axis – 8 units vertical drills on Y axis – 5 units horizontal drills on X axis – 4 units horizontal drills on Y axis – 4 units HSK 63 tool holders central lubrication pump vacuum raster table Hfjdpfowp R Eiex Al Tei edge milling unit on X axis year of manufacture: 2011

Stanje: rabljeno, Leto izdelave: 2013, skupna višina: 2.240 mm, skupna dolžina: 5.240 mm, skupna širina: 2.400 mm, Lastna teža: 2.700 kg - Letnik izdelave: 2013 - Dokumentacija je na voljo: Da - Prisotna je oznaka CE: Da Hsdpewnii Rofx Al Tofi - Prisotno je potrdilo CE: Ne - Serijska številka: AA1/017355 - Število vreten za rezanje [kos]: 1 - Vreteno za rezanje 1: - Število nadzorovanih osi [kos]: 3 - Največja hitrost vretena [rpm]: 24.000 - Moč glavnega motorja [kW]: 9,5 - Vrsta mize za rezanje: konzolna miza - Na voljo so vrtalne orodja: Da - Vodoravna vretena za vrtanje [kos]: 6 - Navpična vretena za vrtanje [kos]: 12 - Na voljo je enota za žaganje: Da - Sistem/programska oprema: SCM Maestro - Delovni obseg X [mm]: 3050 - Delovni obseg Y [mm]: 1250 - Delovni obseg osi Z [mm]: 1810 - Največji hod osi Y [mm]: 1550 - Napetost [V]: 400 - Poraba električnega toka [A]: 31 - Dimenzije za transport: 5240 mm x 2400 mm x 2244 mm (d x š x v) - Teža za transport [kg]: 2700 kg - Paketi za transport [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV. DDV/davčna obravnava: DDV je odbitljiv za podjetja. Dostava in prevzem je možen kadarkoli za vse izdelke iz industrijskega sektorja. Glenn Smeets

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, pomik osi Y: 1.250 mm, pomik po osi Z: 80 mm, dolžina obdelovanca (maks.): 99.999 mm, širina obdelovanca (maks.): 1.250 mm, višina obdelovanca (maks.): 50 mm, teža obdelovanca (maks.): 40 kg, število osi: 3, število mest v zalogovniku orodij: 4, proizvajalec krmilnikov: TPA, vrsta aktuacije: električni, skupna višina: 2.140 mm, skupna dolžina: 3.080 mm, skupna širina: 1.610 mm, skupna masa: 1.515 kg, leto zadnje generalne obnove: 2025, hitrost pomika os X: 25 m/min, največja hitrost rezkalne vretena: 3.600 obr/min, hitrost žaginega lista: 7.000 obr/min, Oprema: CE označba, dokumentacija / priročnik, Technical Data - Number of independent vertical spindles: 12 - Number of independent horizontal spindles on X-axis: (2+2) - Number of horizontal boring spindles on Y-axis: (2+2) - 1 saw (Ø 100 mm) - Electrospindle 5 kW with ISO30 taper (12,000-24,000 rpm) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited / Y 1,250 mm / Z 50 mm - Min. workpiece dimensions: X 270 mm / Y 150 mm (70 op) / Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3,600 rpm - Saw speed: 7,000 rpm - Max. horizontal tool Ø: 12 mm - Max. horizontal drilling depth: X and Y axis 35 mm - Max. vertical drilling depth: 43 mm - Max. vertical tool Ø: 35 mm - Motor: 1.7 kW - Adjustable zero point for 4-sided processing - CE compliant The DDT Feed System: Double Dynamic Transport Two clamps ensure uninterrupted workpiece transport. The operator inserts the workpiece against the stop. Both clamps grip and position the workpiece precisely. During machining, the clamps communicate, so that clamp #2 securely holds the workpiece before clamp #1 releases. This ensures continuous and stable feed, even during linear milling operations. - Laser measurement for detecting workpiece start and end - Detected values can be imported to the respective program and used for adjustments - Side guides with rollers, consisting of a fixed and a movable part, both equipped with mechanical digital display for automatic alignment to the zero stop, allow for material removal from 1 mm up to 3 mm along the zero line - Constant side pressure device for precise alignment to the zero line - Automatic 4-position tool changer - Adjustable zero point - Unlimited workpiece length Peripherals and Additional Features - LCD-TFT monitor - Industrial PC - User interface WSC with part list, parametric tool, and parameterizable setup Hfodpfx Alsy Id Rie Tsi - USB port - Storage of all files - Macro programming - DXF file import possible

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 3200 mm Delovno območje Y: 1330 mm Delovno območje Z: 170 mm 5-osni elektro vreteno, moč 11 kW Vertikalne vrtalne glave: 16 Horizontalne vrtalne glave X: 4 Horizontalne vrtalne glave Y: 4 2 rezila za utore v smereh X in Y Hfsdpfx Asy S Av Ejl Toi Stranski linearni menjalnik orodij s 10 mesti Revolver menjalnik orodij s 16 mesti Delovna miza s 6 prečkami Avtomatski sistem mazanja Klimatska naprava za električno omaro Vakuumska črpalka 250 m3/h Krmiljenje: BHC 660 Krmilna enota (pult) Varnostne preproge Zaščitne rešetke Na voljo od sredine julija