širokopasovni brusilni stroj

SCM Sandya 30 RT

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Einwellenzerkleinerer von Weima Modell: WL6S Hauptantrieb: 22 kW Nlsdpfx Aoivpttebijg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Nedpfx Asdqzcxobiolg Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated Nodpfxjx Sxfvo Abijlg - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, rotational speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, with STBB HAB S chip container, including complete documentation. Njdpfx Abji A Ix Hsijlg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Nlodpfx Abemhfrrsieg Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically to the state of the art at the time of manufacture.

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min Nlsdpfx Ajvvi Rfebiog · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, Gearbox, bevel gearbox, worm gearbox - Gearbox: Worm gearbox, gear ratio: i = 1:30 Nledpot Snwxsfx Abiog - Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm - Dimensions: 150/145/H175 mm - Weight: 5.1 kg

Stanje: zelo dobro (rabljeno), Surface Planer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence (tiltable), dimensions 1500x175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. depth of cut: 8 mm Extraction port: Ø 120 mm Table height: 860 mm Hydraulic table lifting/lowering with foot pedal Njdpfxoy Emf Rs Abislg Digital cutting depth display Noise-reducing combs on the cutterhead Star-delta starter Emergency stop button CE compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – free loading! • Machine has been cleaned and function-tested. • All machines are sold as seen and inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We answer inquiries only with your address and telephone number!)

Stanje: rabljeno, Premer struženja nad posteljo: 460 mm Premer struženja nad prečnim suportom: 256 mm Dolžina struženja: 1250 mm Razdalja med konicama: 1250 mm Višina konice: 230 mm Njdpfx Aoxwp Ebsbislg Premer vretena: 55 mm Hitrosti vretena: 35 - 1800 min⁻¹ Teža stroja: ca. 2,7 t Dimenzije stroja D x Š x V: 2,75 x 1,20 x 1,42 m Oprema: Tročeljustna glava Ø250 mm, MULTIFIX glava s 3 vložki, fiksna luneta

Stanje: rabljeno, Leto izdelave: 2005, moč: 7,5 kW (10,20 KM), največja višina reza: 170 mm, največja širina rezanja: 1.100 mm, premer žaginega lista: 500 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: hidravlični, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.500 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.500 kg, Oprema: CE označba, No. 04528 Sliding Table Panel Saw Martin T 73 BASIC Used, Year of Manufacture: 2005 Sliding table: 3000 mm Maximum cutting height: 170 mm Maximum saw blade diameter: 500 mm Saw blade bore: 30 mm Cutting width: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle settings Length stop extendable up to 3300 mm Sliding table with infinitely variable locking Integrated contact for extraction system activation Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Weight approx. 1500 kg To avoid possible misunderstandings, on-site inspection after prior arrangement is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. Nljdpfeyymtdox Abijg For used machines, any warranty is excluded; the following applies: 'sold as seen.' Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.