Stroj za oblaganje robov

SCM K360

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW Ljdsrx S Ipjpfx Aacehc - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg Lodpfx Aasd H Sc Ejcohc

Stanje: rabljeno, Leto izdelave: 2016, MACHINING CAPACITIES: - Workpiece (panel) height (thickness): 8 to 60 mm 10 to 45 mm when using the corner rounder - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed drive (advancing speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum radius dimensions of panel corners: Ø x mm - Panel overhang with respect to the conveyor belt: - Maximum trimming depth (shapers): mm² - Workpiece spacing: mm Edgebanding using roll stock: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Edgebanding using strips: - Maximum thickness: 6 mm Maximum 3 mm with corner rounding unit Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounder MACHINE CONFIGURATION: - Unwinder table, usable Ø795 mm - Working table: Length 4.15m, Height 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge milling units (2 shapers) 12,000 rpm - Interchangeable glue station, 180-200°C Pneumatic pre-cutting guillotine Pressure station with 3 rollers (1 motorized) - End trimming unit: 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying shoes - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for adjustments (Siko type) OTHER CHARACTERISTICS: - Main power supply: 400V, three-phase, 50Hz, IN 21A - Feed drive motor: 0.75 kW Ljdpfxsx Dcn Ne Aacohc - Milling motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Finishing (trimming/milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8-10 bar dry air Required working pressure: 6 bar - Dust extraction outlets: 3 x Ø75 mm internal + 2 x Ø50 mm internal + Ø95 mm internal Required airflow: 1600 m³/h - CE marking, lockable main switch, emergency stop buttons Overall dimensions in working order: 4.45 x 1.70 x h.1.80 m Dimensions for transport (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti Moč in motorji Napetost: 400 V Lhodpfetu R Sdex Aacjc Priklop: trifazni Skupne dimenzije Teža: 1428 kg

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Lhsdpfxegtm U Ae Aacec Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm Lsdpfjv S Hy Aox Aacshc tilt adjustment 0–45° electrically controlled with digital readout blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit Ljdpfx Aed Inktoacshc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Lodpfx Aajdqzcxscjhc Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Lhedpfx Ajrigxyeacoc Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec Ledpfod H Rf Tox Aacjhc • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)