Drsna namizna žaga

Robland PS 3200 silver line

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Hnodpjgtm U Aofx Agiok Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm Hnsdjd H Rf Topfx Agijk • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW Hnedpfewka S Ijx Agijk - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, Swing diameter . mm Turning length 2000 mm Control Siemens 840 D sl Main spindle: max. speed 3800 rpm Main spindle: max. torque 1200 Nm Tailstock quill diameter 140 mm Center taper MK6 Tailstock force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the vendor's plant. It is in good condition, with excellent turning accuracy. Hsdpjvu E R Sefx Agienk The milling drive is non-functional. A quotation from Niles for the repair of the milling drive is available upon request. Includes hydraulic steady rest.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation Hjdouthz Tjpfx Agienk - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Stanje: novo, prevoženi kilometri: 1 km, moč: 11,77 kW (16,00 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 1.000 kg, lastna masa: 1.000 kg, obratovalna teža: 1.000 kg, dvižna višina: 2.610 mm, velikost pnevmatike: rups, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, širina izkopne žlice: 430 mm, Leto izdelave: 2024, Oprema: dodatne luči, gumene gosenice, hidravlika, nastavljiva roka, žerjav, GG1100 The GG 1100 mini excavator with a 3-cylinder Kubota engine is a 1-ton class weighing machine featuring a swing frame/knuckle boom and an adjustable undercarriage. Description The latest GG1100 model from Günter Grossmann: Every machine by Günter Grossmann is built with quality components. The GG1100 model is a well-equipped excavator designed for the most demanding contractors in the construction, electrical, and hydraulic sectors. All excavators are manufactured using advanced technologies. We provide post-warranty service and stock spare parts in Europe. Price List €10,500.00 Includes: GG 1100 + 380 mm bucket SPECIFICATIONS Model: GG 1100 Brand: Günter Großmann Operating weight: 1,000 kg Boom: Articulated arm / swing arm Track: Hydraulically adjustable Bucket capacity: 0.025 m³ Bucket width: 380 mm Engine: Japanese Kubota Cylinders: 3-cylinder Hnjdpfxsp Aruxj Agiok Power: 16 HP Main pump: Wanye hydraulic Slew motor: Dali Travel motor: Dali Travel speed: 1.5 km/h MAIN DIMENSIONS Overall dimensions (LxWxH): 2770 x 936 x 1490 mm Track length: 1230 mm Undercarriage width: 896 mm Track width: 200 mm Ground clearance (undercarriage): 132 mm Track height: 320 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius at ground level: 2890 mm Swing radius: 360° Max. dozer blade lift height: 345 mm Max. dozer blade drop depth: 255 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Cormak MJ45-KB4 sliding table saw with scoring unit is an advanced machine, also known as a panel saw with a scorer. It is the ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and design: The Cormak MJ45-KB4 is a robust woodworking machine with a durable steel frame ensuring stability during operation. The large worktable, guided on hardened steel rods with a carriage length of 3200 mm and cutting units mounted on it, guarantees high efficiency and precision. Main cutting unit: Scoring unit: A key feature of this saw is the scoring unit, designed to eliminate internal stresses in wood by pre-scoring the underside of the workpiece. This feature makes the wood less prone to cracking and deformation after cutting. The 0.75 kW scoring unit motor ensures reliable trimming. Saw blade: The Cormak MJ45-KB4 sliding table saw is equipped with a circular saw blade as its main cutting tool. The electric motor drives the saw blade, enabling precise material cutting. With a 350 mm diameter blade, the maximum cutting height is up to 105 mm. Manual scorer adjustment: Simple and efficient manual adjustment of the scoring unit allows for quick and precise calibration. Stops facilitate restoring previous settings, while intuitive positioning near the operator’s workstation enables adjustments without interrupting workflow. Features and functions of the sliding table saw: - Large work surface: The saw features a spacious tabletop, simplifying the handling of larger sheets of material. - Smooth feed: The feed system utilizes precision-hardened steel guides with steel ball bearings, enabling longitudinal trimming even of long sheets or plywood. - Angle and cutting depth adjustment: Adjustable cutting angles and depths allow the tool to be tailored to specific project needs. - Safety systems: The saw is equipped with safety features such as guards and emergency stop systems to ensure operator safety. Applications of sliding table saws with scoring unit: Sliding table saws with scoring units are mainly used in woodworking and window manufacturing industries for cutting wood and wood-based materials. They are perfect for cutting boards, chipboards, MDF panels, and other similar materials. The Cormak MJ45-KB4 is a highly precise, advanced tool. Technical specifications: Table dimensions: 990 x 575 mm Format table length: 3200 mm Rip capacity at the rip fence: 1250 mm Hedpfx Aetz Smiegisnk Cross-cut capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade height: 0–105 mm Saw blade height at 45°: 0–73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring blade speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Extraction port diameter under the table: 100 mm Extraction port diameter on blade guard: 80 mm Machine weight: 680 kg Saw supplied without cutting blades The price does not apply to machines sold in Poland.

Leto izdelave: 2022, stanje: novo, angle: 0° - 90° Hnedpfx Asi Ezr Nogisk maximum cutting length: 1,370 mm

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Hodeu R S Hcjpfx Agijnk Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood optional - - New demonstration machine -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Hjdpfxouiy Nyj Agionk Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff