širokopasovni brusilni stroj

SCM dmc sd 60

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Glavni pogon Moč motorja vretena: 11 kW Tračna brusilka SCM DMC sd60 je bila izdelana leta 2018. Pokriva delovno širino 1.100 mm ter obdeluje materiale višine od 4 do 170 mm. Opremljena je z glavnim motorjem 15 kW ter omogoča podajalne hitrosti 4,5/9 m/min. Dodatne funkcije vključujejo kalibracijski valj, obložen z gumo, brusilni valj, trdo brusilno nogo in elektronske kontrole za natančno delo. Razmislite o nakupu te tračne brusilke SCM DMC sd60. Za več informacij nas kontaktirajte. Vrste uporabe Brušenje Cpjdox Nr Sdepfx Afxeu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine 4+4 motors Codpfx Afovx Afnexopu Opening width 3000 mm Option for complete overhaul available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, SCM Wide-Belt Calibration and Fine Finishing Sander Model: dmc sd 60 RCS 135 Technical Data: Working width: 1,350 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,370 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Feed motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore hardness – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore hardness – 2nd position - Hard sanding pad with manual adjustment of working height - Motor power for 1st unit: 11 kW (15 HP) - Electronic ammeter for main motor, indicates power consumption - Electronic digital display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - Rubber feed belt, 60 Shore hardness Cjdpfstwqn Sjx Afxjpu - Roller table with two rollers at infeed and outfeed of the working table - Conveyor feed with two speeds: 4.5 / 9 m/min, via geared motor - Automatic conveyor belt tracking Including the following special equipment: 1 pc. Version "B" for RCS with: pneumatic on/off switching of roller for 1st unit “R” + pneumatic on/off switching of roller for 2nd unit “CS” + “MESAR” elastic segmented pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller for 1st unit 1 pc. main motor 18.5 kW (25 HP)

Stanje: novo, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel structure with electrical control cabinet located at the front of the machine * Sanding belts inserted from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical Equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with insulation class IP 54 Emergency and Safety Devices * Safety microswitch for thickness limit exceedance * Automatic brake for immediate stop of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom emergency stop buttons at workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in case of: - Sanding belt breakage - Unsufficiently tensioned sanding belt - Lateral deviation of the sanding belt - Lack of compressed air - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase mains supply + neutral wire + earth wire. If the 400 Volt power supply has no neutral wire, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with voltage higher than 400 Volts, regardless of whether a neutral wire is present. The version of the machine with 220 or 230 Volts (50 or 60 Hz) is available at a surcharge (see price list). STANDARD BASIC MACHINE EQUIPMENT - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with geared motor - Automatic belt centering Cpjdpsvwfrnofx Afxeu Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor output kW (HP) 11 (15) Geared motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety standards (C.E. mark) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10-inch control panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Inspection possible by appointment. Cpodpsv Umb Ejfx Afxou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-250-84-4817, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: HOMATIC, model krmilnika: PC86 PowerControl, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.250 mm, skupna višina: 2.800 mm, širina mize: 2.250 mm, dolžina mize: 4.300 mm, moč vretenovega motorja: 12.000 W, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machining centre Year of manufacture: 2019 Operating hours: 7,840 h main use / 2,420 h secondary use Piece counter: 28,661 Values as of: 13/01/2026 Maximum workpiece dimensions: • X-axis: 4,300 mm • Y-axis: 2,250 mm Cjdpfxjx Rcdao Afxopu • Z1-axis: 410 mm, Z2-axis: 185 mm SPECIFICATION / EQUIPMENT MATRIX-PRO machining table, dimensions 4,300 x 2,250 mm - 4 pneumatically retractable stops with electronic position detection - 3 vacuum pumps, each with a capacity of 290/345 m³/h at 50/60 Hz, total 870/1,035 m³/h - 2 separable vacuum zones, each 2,150 x 2,250 mm - 3 safety/anti-slip mats, safety fencing with door - Main spindle 11 kW, 24,000 rpm (liquid-cooled) - Spindle with C-axis interface - Tool holder/clamping HSK F63 - SENSO-FLEX probing system, controlled in Z-axis - Vertical drilling unit with 21 spindles, drive power 2.3 kW - 14-position tool changer (carousel type) 1 ROLLER TABLE for panel handling 7,080 x 2,200 mm Control / Software: - PowerControl PC86 powerTouch - WoodWop 7.1 Machine dimensions 11.60 x 4.50 x 2.80 m The machine can still be viewed in operation. Availability: from July 2026 (approx. CW28)

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of manufacture: 1999 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Notes: Machine: VG TYPE F-300-COMBI/CE Year of manufacture: 1998 Category: Through-feed grinder Location: Gorzów Wielkopolski Cpodpfx Asd Nmdkjfxou Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Through-feed sander VG TYPE F-300-COMBI-CE / 1998 - Machine from the Combi series - Contact roller and pad sanding - Pneumatic oscillation and mechanical belt tensioning - Motors: 7.5 + 1 HP / 380 V - Sanding belts: 300 x 1900 mm

Stanje: dober (rabljeno), Koda: 0456 Znamka: MEBER - ITALIJA Model: BEST 800 - CE standard Industrijski tračni žagalni stroj s podajalnikom za obdelavo lesa, polizdelkov, okenskih okvirjev, lepljenega lesa, tramov, desk, uporabo v žagah, mizarskih delavnicah in raznovrstne aplikacije – skladno s CE standardom. Značilnosti: - Robustna izvedba Cjdpfx Afown H Iwexopu - Ergonomsko nameščena upravljalna plošča - Popolna zaščita žaginega lista - Strgala s kovinsko (medenina) rezilno površino za učinkovito čiščenje vztrajnikov - Premer vztrajnika: 800 mm - Dimenzije delovne mize: 1300 x 800 mm - Kapaciteta reza (višina x širina): 380 x 750 mm - Širina žaginega lista: 80 mm - Obrati vztrajnika: 700/min - Dolžina žaginega lista: 5090 mm - Moč motorja: 20 KM Podajalnik R1: Opremljen z zobatim pogonskim valjem in vodilno ograjo z prostovrtečimi valji, ki jih je možno nastaviti ročno – položaj valjev je nastavljiv – variator hitrosti podajanja - Višina valja: 235 mm - Premer valja: 215 mm - Največja razdalja med valjem in žaginim listom: 290 mm - Največja razdalja med ograjo in žaginim listom: 200 mm - Dimenzije ograje: 490 x 290 x 260 mm Dimenzije stroja z nameščenim prežagalnim nastavkom: 1200 x 1900 x 2500 mm (V x Š x G) Skupna teža: 1580 kg

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure Cpedjwhmdfepfx Afxju No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Cpjdpfx Afogtm U Asxeu Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES