Brusilnik s širokim pasom

SCM DMC SD 60 - RCS 110

- NEW -

GENERAL FEATURES:

Machine Frame and Work Table
* Steel structure with electrical control cabinet located at the front of the machine
* Sanding belts inserted from the left side of the machine
* Motorized table height adjustment
* Main motor integrated into the machine frame

Electrical Equipment
* Electromechanical control panel on the left front side of the machine
* Automatic star-delta starter for the main motor
* Motor protection switches for the motors
* Motors with insulation class IP 54

Emergency and Safety Devices
* Safety microswitch for thickness limit exceedance
* Automatic brake for immediate stop of the aggregates
* Emergency stop bar at the workpiece infeed
* Mushroom emergency stop buttons at workpiece infeed and outfeed
* Lockable main switch
* Automatic emergency shutdown of the machine in case of:
- Sanding belt breakage
- Unsufficiently tensioned sanding belt
- Lateral deviation of the sanding belt
- Lack of compressed air
- Main motor overload

Note: The standard version with 400 Volt 50 Hz requires a three-phase mains supply + neutral wire + earth wire.
If the 400 Volt power supply has no neutral wire, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with voltage higher than 400 Volts, regardless of whether a neutral wire is present.
The version of the machine with 220 or 230 Volts (50 or 60 Hz) is available at a surcharge (see price list).

STANDARD BASIC MACHINE EQUIPMENT
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Sh - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position
- Hard sanding pad with manual working height adjustment
- Main motor 11 kW (15 HP)
- Electronic ammeter for the main motor to display current consumption
- Electronic display for working height
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Kickback protection at infeed before the first aggregate
- Rubber feed belt 60 Sh
- Roller table with two rollers at infeed and outfeed of the work table
- Feed belt with two speeds 4.5 / 9 m/min with geared motor
- Automatic belt centering

Working width mm 1,100
Min./Max. working height mm 4 - 170
Sanding belt width mm 1,115
Sanding belt length mm 2,150
Main motor output kW (HP) 11 (15)
Geared motor kW (HP) 0.45/0.8 (0.6/1.1)
Feed speed m/min 4.5/9

Consisting of:
10.90.87 European safety standards (C.E. mark)
93.07.31 Volt 400 EU
Godpfx Ahjvwfrne Douh
93.12.01 Frequency 50 Hz
44.44.19 Version "B" for RCS
33.31.50 Roller table at infeed and outfeed for long workpieces
62.44.50 10-inch control panel with "eye-S" software integration
31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate
97.50.71 Main motor 15 kW (20 HP)

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.