Vrtalni stroj

SCM Cyflex H800

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0. Year of manufacture: 2019 Lrjdpfx Abevx Dz Ds Tei Configuration: - 1 pc. milling spindle 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return conveyor returns the workpieces either back to the operator or to the rear of the machine for throughfeed operation. Maximum workpiece size: x 1250 x 50 mm Minimum workpiece size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Comes with full documentation and CE certification. Very good condition. Available immediately.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Funkcionalnost: nefunkcionalno, Machines for restoration Ledpfx Abelxqk Ro Teri

Stanje: zelo dobro (rabljeno), Olupilnik okroglega lesa VK450 2RE. Opremljen z dvema rotorjema. Eden je rotor za frezanje štorov. Drugi je luščilni rotor. Min–maks premer lesa 8–45 cm. Minimalna dolžina lesa 3 m. V kompletu z originalnim VK centrirnim transporterjem. Bo prodan po generalnem remontu. Lrodpfsulv Hzsx Ab Tei

Leto izdelave: 1993, stanje: rabljeno, • Working width (mm): 2200 • Motor power (kW): 22 • Upper rollers: with PU rings • Lower rollers: corrugated Lsdpfjn I Twysx Ab Tjri • Saw shaft: included

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation Lodohuthyspfx Ab Tsri

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Ljdjv Sv Enjpfx Ab Tsri Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers Lsdpfx Ast Hxxpob Tjri - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: zelo dobro (rabljeno), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Working pressure: 6–8 bar Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate Lodpfjvx Aqdex Ab Tsri

Stanje: dober (rabljeno), Leto izdelave: 2019, CNC throughfeed machining center with dual clamp drive in X-axis direction and gantry construction in Y-axis direction. The second gripper enables sizing down to 15 mm as well as continuous milling movement in the X-axis direction. The workpiece is measured in length (X-axis) using a sensor. Working area: X-axis 3,500 mm Y-axis 950 mm Z-axis 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic tool loading or unloading into/out of the machine. Alternatively, can be used as an additional tool station for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter 8 mm; lengths: 20, 25, 30, 35, or 40 mm Front and rear air cushion tables, foldable Machine software WOODFLASH including: - CNC board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Lredpfxexrahcj Ab Tei Dongle upgrade: 3D simulator with collision detection for WOODFLASH on the machine Workpiece release at the rear side of the machine Machine delivered without tools and HSK holders.

Stanje: rabljeno, Leto izdelave: 2020, skupna višina: 2.100 mm, skupna dolžina: 2.000 mm, skupna širina: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - CE mark present: Yes - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling machine: Yes - Software: Biesse Works - Saw unit included: Yes - Safety device: - Spindle speed control: Variable - Voltage [V]: 400 - Power consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Transport packages [pcs]: 2 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin taxation: VAT deductible for entrepreneurs Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets Ledpex Ad R Nsfx Ab Tjri