Nagibna vretenasta rezkalnica

SCM GROUP S.p.A. TI 155 EP CLASS

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support Djdpfsxnlgcox Af Ssur In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: dober (rabljeno), Kód: 0321 Djdpfxsytn U Io Af Sour Znamka: SCM Model: MULTIFLEX C - CE Standard Avtomatski delovni center za izdelavo okenskih okvirjev za čepovanje, profiliranje in konturiranje – maks. debelina obdelovanca 140 mm – CE standard Tehnični podatki Avtomatski voziček z zagozdilcem Maks. delovna dolžina: 2800 mm Min./maks. debelina obdelovanca: 30/140 mm Premer žage za odrezovanje koncev: 400 mm – motor 4 KM Uporabna dolžina čepilnega vretena: 320 mm – motor 10 KM Premer vretena: 50 mm Maks. premer orodja: 350 mm Profilirna vretena: 1. proticepilno profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm 2. profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm Min. in maks. premer orodij profilnih vret: 100/220 mm Premer profilnih vreten: 50 mm Orodna skupina: Zuani Spremenljiva hitrost pomika Skupina za vračanje zasteklitvenih letvic – motor 3 KM – premer odsesovalnega priključka 50 mm Skupne mere: 2400 x 3300 x 2000 mm (v x š x g) Teža: 2200 kg

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Dedpfxowgwmnj Af Sjur Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Maks. podajalna hitrost: 25 m/min Število delovnih vreten: 6 Dujdpfow Iddzjx Af Ser

Stanje: rabljeno, Leto izdelave: 2009, skupna širina: 1.800 mm, skupna višina: 1.650 mm, Net weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor configuration: Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate available: No - Serial number: AA2/001125 - Number of spindles [pcs]: 4 - └ Spindle 1: - Spindle diameter [mm]: 40 - └ Spindle 2: - Spindle diameter [mm]: 40 - └ Spindle 3: - Spindle diameter [mm]: 40 - └ Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Infeed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction nozzle diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) Dedpfx Afswnh Ire Ssur - Transport weight [kg]: 2400kg - Transport packages [pcs]: 1 Financial information VAT: The quoted price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in are possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Krmiljenje: ne Enostranska žaga za zasteklitvene letve Hecht ES 350 ----- Zasuk pnevmatsko proti fiksnim omejevalcem. 45º/90º/135º s pnevmatskim pomikom žaginega lista pnevmatsko nihanje preko ročnega omejevalca z nogo stroja, pnevmatska pritrditev Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala za žago: dolžina 700 mm, globina 1.600 mm, višina 1.500 mm Dodevpr N Repfx Af Ssur Dotikalni omejevalec 1,5 m Oporna površina 1,5 m z nosilcem Dotikalni omejevalec 3 m Podaljšek oporne površine z 1,5 m na 3 m z nosilcem Vložki v mizo z utori za prekrivne zasteklitvene letve HECHT ASB ročni dolžinski omejevalec z digitalnim prikazovalnikom, 2500 mm Z odsesovalno napravo (Tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Debelinski skobeljni stroj model MARTIN T 44 rabljeni stroj CE-označevanje: Da delovno stanje: Odlično tehnični podatki: uporabna delovna širina mm: 630 maksimalna delovna višina mm: 250 maksimalni odvzem mm: 8 2 podajalni hitrosti m/min: 6 / 12 motorizirano pozicioniranje mize z digitalnim prikazom Dedpfxjyml E Do Af Sour 4 rezila „Tersa“ glavna moč motorja KM: 7,5 teža kg: 1115 napetost: 380/50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and moulding machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system and additionally features mechanization for the return of planed parts, making it ideal for efficient production. Machine Features 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including jointer fence) Spring-loaded pressure rollers from above Side pressure pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller spacing between infeed units (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Dusdpfx Aox Sxfvef Ssr Infeed roller in front of 1st lower tool pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and serviced regularly, and will remain in operation until 17.12.2026. Viewing of the running machine is possible at any time by appointment. The technical specification and layout of the machine can be found in the documents.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 15 mm, skupna masa: 4.000 kg, OTT robna lepilka TIP Strom+ opcijsko z vračalnikom TransCompakt ali TransLift. Stroj je tovarniško obnovljen in se prodaja z garancijo v Nemčiji. Orodja nova, verižni segmenti in jermeni novi. Za PUR in EVA lepila. Alternativno imamo na voljo tudi Tornado+ in StrongEdge, prav tako tovarniško obnovljena. Duedpjyn Am Ijfx Af Ser

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000–6,000 rpm - Width and height are motor-positioned: left spindle: radial upper spindle: axial - Feed carriage motor-positioned DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15–230 mm Working height (with tool diameter 125 mm): 10–160 mm (with tool diameter up to 163 mm): 10–160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Grooving device: diameter difference 20–25 mm to planing head Important: The system cannot be operated without jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Dodpswgwmhjfx Af Sour Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled...