Zamenljive čeljusti, 11 kompletov

SCHUNK KM-WB 41

Stanje: rabljeno, TIG Welding Machine L-TEC Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 A = 60% duty cycle 155 A = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Power connection: 400 Volt, 50 Hz, 32 Amp. plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - DC only - HF ignition Required space (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg Tedpfjdzqb Eex Altja The welding test shows very good results when welding stainless steel with direct current. Otherwise, in good condition.

Stanje: novo, Gas-fired preheating furnace, manufacturer VEI Model: VEI_KO_V_GB_400-350 Operating temperature: 350°C Burner output: 2 x 200 kW Todpofbgz Iefx Altoa Recirculation fans: 2 x 4 kW Useful dimensions x 2 (H x D x W): 1,000 x 1,400 x 2,800 mm

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, CNC stružnica Tsdpfx Aeumlwxeltea

Stanje: rabljeno, Leto izdelave: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Tedpfxsiqp Ere Altja Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table size: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight: approx. 1750 kg Space requirement: approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angles - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band break monitoring - Smooth-running saw carriage via preloaded ball linear guides - Additional table 450 x 450 mm - Machine lamp

Leto izdelave: 2000, stanje: dober (rabljeno), Tank & Environmental Protection Wozniack – Certified Specialist Company According to the German Water Management Act (WHG) Dear Sir or Madam, We offer a 30,000-litre double-walled storage tank suitable for storing liquid fertilizer as detailed below. The storage tank is equipped with a factory-new inner liner made of plastic, resistant and certified for liquid fertilizer storage. An acoustic leak detection system is installed externally in a lockable protective box. In addition, the storage tank’s double wall is made of steel for extra safety. The plastic liner has general building authority approval, making it suitable and certified for the storage of liquid fertilizer (AHL), NOx reduction agents, AUS32, and AdBlue. Technical Specifications: - Nominal capacity: 30 m³ - Quantity: 1 unit - Condition: Used, but fully refurbished (cleaned, reconditioned, primed, and repainted) - Paint finish: RAL color; custom colors available upon request - Material: Steel-in-steel—Material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate per DIN 6616 D/2 and type plate - Accessories include: * 1 dipstick * 1 vent nozzle * 1 filling nozzle (3") made of new V2A stainless steel * 1 new acoustic leak detector for double wall monitoring * 1 ladder * 1 suction line (3"), newly installed in V2A stainless steel - Design: Cylindrical horizontal tank with support feet/brackets Tank Dimensions: - Length: approx. 6,740 mm - Diameter: approx. 2,500 mm - Weight: approx. 6,500 kg - Installation: Above-ground Special Offer: Liquid fertilizer (AHL) tank systems available from 5,000 to 100,000 litres, as well as water and fire water tanks. Customization: Your input for customizing the tank system is welcome. All systems are thoroughly tested and inspected by our experienced staff at our facility. Delivery: Economical delivery can be arranged upon request. Site inspections of our systems are possible at any time. We also have a wide range of above-ground and underground tanks in various sizes available for immediate purchase on-site. Interested in our offer? Should you have any questions or specific requests, please feel free to call. Our experienced team will be happy to advise you. Price / Shipping: The price is ex-works Warstein, loaded free of charge. Delivery can be arranged at a competitive additional cost. Lead time: Immediate availability Invoice with VAT shown will be provided. Additional Services: We also purchase existing tank systems and, as a WHG-certified specialist company, can professionally empty, clean, dismantle, and transport them from your site. Best regards from Warstein, Todpfec Nk Dyox Altja Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Manufacturer: Demag Model: DH520 H20 4/1 F10 Year of manufacture: 2000 Load capacity approx.: 8,000 kg Hook path approx.: 10,000 mm Crab track approx.: 1,400 mm Reeving: 4/1 Drive group: FEM/ISO 2m/M5 Operating speeds: Hoist approx. 0.8 / 8.0 m/min Trolley travel approx. 5.0 / 20.0 m/min Certificate confirming approx. 80% remaining service life issued by a certified inspector Tedpfx Alskqm Aistoa Equipped with: - Mechanical fine lifting F10 - Wire rope and bottom block 4/1 - Trolley drive

Stanje: dober (rabljeno), Leto izdelave: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Travel path x-y-z: 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping surface: 1,060 x 260 mm Tjdefli Afspfx Altoa Speed range: 28 to 1,400 rpm Spindle taper: SK 50 Quill stroke: 80 mm Feeds x and y axis: 16 to 800 mm/min Feed z axis: 5 to 250 mm/min Connected load: 8 kW Accessories/Equipment: Swiveling head Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AHL-50, kapaciteta rezervoarja: 50.000 l, 50,000 liters capacity, above-ground, made of steel sheet. The tank complies with DIN 6616, is fitted with 2 saddle feet, an access ladder, and has been professionally drained and cleaned inside. Tedpsb Hpd Rjfx Altoa Dimensions: L = approx. 10.70 m - D = 2.50 m The tank will be equipped with a brand-new internal plastic lining, including a leak monitoring device housed in a protective case (see sample photo). The plastic lining has a "General Building Authority Approval" and is therefore suitable and approved for storing liquid fertilizer (AHL) as well as NOx reduction agent AUS 32 (AdBlue). The exterior of the tank will be completely sanded, newly primed, and repainted in a RAL color of your choice. The price is ex works – free loaded. (Delivery can be arranged at a favorable additional cost.) Delivery time = by arrangement. Important: The tank shown (sample photo) is a refurbished 50,000-liter tank that has already been delivered to a customer. The shown plastic piping (PVC connection) is not included in the scope of delivery but may be purchased at an additional cost. You will receive an invoice with VAT indicated. The purchase is subject to our general terms and conditions.

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 073759001, Offer 22489 Technical data: - Cutting range at 90° round 320 mm Todpfx Ajim Ildoltsa - flat 320 x 320 mm - Material feed automatic - Saw band dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper lift limitation for saw frame - Infinitely variable cutting pressure adjustment - Hydraulic material vise - Chip conveyor screw - Coolant system - Discharge roller table 2500 mm - Drive motor 400 V / 4.0 kW - Required space approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Stanje: novo, 1 brand new semi-automatic high-performance horizontal bandsaw with double-column guidance and 2° cutting inclination towards the table support surface Brand: HUVEMA - BEKA MAK Model: BMSY 560 C Technical Specifications: Cutting capacity 90° rectangular: 560 x 750 mm Cutting capacity 90° round: 560 mm Cutting capacity 90° square: 560 mm Cutting capacity 45° rectangular: 410 x 560 mm Cutting capacity 45° round: 560 mm Cutting capacity 45° square: 560 mm Blade dimensions: 6000 x 41 x 1.3 mm Blade speed, stepless: 20-100 m/min Motor power: 4 kW Machine dimensions (L x W x H): 3400 x 1000 x 2050 mm Machine weight: 2045 kg Accessories / Special Features: • Semi-automatic double-column bandsaw Tsdpfjbw H T Dox Altsa • Linear guides • 2° cutting angle towards the table support • Infinitely variable cutting speed via potentiometer on the control panel • Hydraulic vise • Hydraulically/mechanically tensioned saw blade • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • 1200 mm infeed roller conveyor • Chip brush • 1 pc. bi-metal saw blade • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel