Končni frezalni stroj

Garant EQ 753200

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Fedpjwx Rafefx Ahmsph Z 500 mm 10.000 vrt/min

Stanje: novo, Cutting capacity at 90° (round): 510 mm Cutting capacity at 90° (square): 450 mm Cutting capacity at 90° (rectangular): 650 x 450 mm Blade speed: 15 – 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter bandsaw K-tech DG 62/45 HA-I • 2-column miter bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (disinfection) • Energy-saving and low vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure regulation valve • Hydraulic control of saw frame and clamping vice • LEDs for monitoring all safety functions • Large-diameter drive wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic function: Fpjdpfxjd Iipmj Ahmoh 1. Clamp material 2. Saw starts 3. Rapid lowering to material start or, in series cutting, directly cut 4. Saw blade off 5. Raise frame just above the material 6. Clamping vice opens

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 794 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 520 mm, pomik po osi Z: 475 mm, model krmilnika: Siemens, skupna masa: 7.750 kg, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 60, Nudimo DMG DMU 50 v odličnem stanju, z le 794 urami delovanja. Stroj bo na zalogi prihodnji teden. Stroj ima naslednje opcije: - Siemens 840D SL - Hitrovreteno Speedmaster 20.000 vrt/min, 35 kW / 25 kW, navor 130 Nm / 86 Nm, SK40 - Avtomatski menjalec orodij za 60 orodij - Transporter za odrezke - Zasučna miza 630 x 500 mm - Notranje hlajenje 20 bar - Zunanje zračno hlajenje - Zračno vreteno - Rotacijsko okno za jasen pogled - Pršilna pištola - Separator oljne in emulzijske megle - Sonda Heidenhain TS460 - Naprava za merjenje orodja Heidenhain TT160 Fedpfszb Em Rjx Ahmoph - 3D quick set - Elektronsko ročno kolo

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Fpedpfx Asdx D Tvshmoh Weight: 9.5 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB Fpodsx D Irmspfx Ahmsh • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Fjdpfju Rptysx Ahmeph Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Stroj je pravkar prispel in bo kmalu očiščen. Premer struženja nad ležiščem: 400 mm Razdalja med konicama: 1000 mm Velikost vretena: 50 mm Fpedpsyh Ndwofx Ahmsh Velikost vpenjalne glave: 200 mm Območje hitrosti: 40–2000 obr/min Teža stroja: 1700 kg Vključuje 3-čeljustno vpenjalno glavo in držalo orodja.

Leto izdelave: 2012, stanje: delavnici obnovljeno (rabljeno), Konvencionalni precizni stružnica WEILER "CONDOR VC" S triosnim digitalnim prikazovalnikom Siemens Leto izdelave: 2012 Vrtina vretena: 56 mm Razdalja med konicama: 800 mm Maksimalni premer nad posteljo: 205 mm Območje vrtljajev: 30 – 3500 rpm Fodpfx Ahjxykz Aomeph Z naslednjo opremo: - Nosilec orodja Multifix - Zadnja zaščitna stena proti ostružkom z notranjo osvetlitvijo - Naprava za hlajenje - Tri-čeljustna vpenjalna glava Ø 200 mm - Zaščita vpenjalne glave - Sledilna luneta Ø cca 150 mm - Konjiček z izvlečnim vrtalnim pinolom - Navodila za uporabo

Stanje: kot nova (razstavni stroj), Demo unit with less than 20 operating hours // EXCELLENT CONDITION System: Optiv M 6.6.4 Multi-Sensor Coordinate Measuring Machine with Dual Z Technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H probe holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X stylus rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25mm glass standard Fpjdpfjncfd Rjx Ahmoh - 20mm setting ring Computer and Software: - PC-DMIS CAD++ measurement and evaluation software - BEST machine control unit - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) - CWS probe head 3mm - Solara.MP12 - QS STAT 12 - O-QIS 12 Delivery, commissioning, and additional services available on request The measuring machine can be retrofitted to OptiCheck3D V 5.0 if desired.

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 813 mm, skupna masa: 13.611 kg, dolžina mize: 1.626 mm, širina mize: 914 mm, model krmilnika: HAAS, nazivna (navidezna) moč: 22 kVA, premer vrtljive mize: 760 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 4.536 kg, Oprema: transportni trak za ostružke, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-pocket tool magazine (BT50) Full 4th axis Spindle & gearbox replaced new in 2017 Fedpfx Ahsvgmr Iomsph Operated in single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (if our new machine is delivered on the same day)