Ekscentrični tisk

Schuler PDR 125-315

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Pedpfx Agsd Nl E Ujperd Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Predpfx Ajx Ug Degpsd Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: dober (rabljeno), Leto izdelave: 1989, skupna višina: 6.450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Podpert Uc Esfx Agpord Working capacity: 40 kJ Max. blow frequency: 98 rpm Max. usable blows per minute: 41 Max. ram stroke: 790 mm Machine is dismantled Technical specifications available on request

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Pedpfx Agolp U D Tspord Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: rabljeno, Impact energy: 11,000 kg/m Max. stroke: 900 mm Clear guide width: 750 mm Length of tool seat in hammer bar: 750 mm Max. number of strokes: 90 min⁻¹ Prsdpfjvam Ebjx Agped Length of tool seat in die holder: 1,050 mm Minimum tool thickness: 350 mm Maximum upper tool weight: 1,100 kg Working height approx.: 780 mm Counterweight: 75,000 kg Machine weight approx.: 103,000 kg

Leto izdelave: 1981, Stanje: rabljeno, Pressure: 40 t Column clearance: 600 mm Stroke: 160 mm Prodeb U Hw Topfx Agped Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Draw cushion hydraulic pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid approach speed steplessly adjustable up to 240 mm/s

Leto izdelave: 1971, Stanje: rabljeno, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table size: 1050 x 750 mm Strokes: 42 and 62 strokes/min Ram area: 800 x 500 mm Pin hole (depth x diameter): 85 x 50 mm Pass-through opening in table: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight: approx. 11.2 t *with gear train *with fixed work table *with enlarged table and ram area *with enlarged throat depth *with pass-through in the frame *with ram weight compensation The machine is currently being overhauled and the clutch is being disassembled for this purpose. (The press is currently in a disassembled state) Prodecyc Adspfx Agped

Leto izdelave: 1977, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 3273, Manufacturer: Neff Model: 16 SRKA Year of manufacture: 1977 Weight: approx. 4,000 kg Machine No.: 3273 General / Technical Data: Used vertical hydraulic broaching press in good working and ready-to-use condition Pressing force: 16,000 kg Stroke: 1,300 mm Throat depth: 250 mm Installation height: 1,500 mm Table size: 680 x 450 mm Prodpod N Rl Nofx Agped Table opening: 160 x 380 mm Table height from base: 1,600 mm Ram speed: hydraulically and continuously adjustable Machine footprint (W x D x H): approx. 1,000 x 1,800 x 5,100 mm Power supply / Output: 380 Volt, 50 Hz, 22 kW Accessories / Special Equipment: • Integrated coolant system • Press force indicator • Press force limitation • Speed control Remarks: The machine is in ready-to-use condition and still has its original paintwork. The stroke is released manually via hand or foot operation. The machine is connected to power in our warehouse and can be inspected under power and demonstrated.

Leto izdelave: 1980, Stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t Prodpfocdtplex Agpsd automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Stanje: rabljeno, Leto izdelave: 1978, Impact energy: 7,000 kg/m Max. stroke: 850 mm Prsdjvam D Rjpfx Agpod Max. strokes per minute: 100 min⁻¹ Tool holder length in hammer bar: 650 mm Ram weight: 2,500 kg Tool holder length in die holder: 900 mm Minimum tool thickness: 300 mm Max. upper tool weight: 800 kg Working height approx.: 780 mm Anvil weight: 47,500 kg Machine weight approx.: 64,000 kg