Pnevmatsko kladivo

Huta Zygmunt MPM 6300

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), MŁOT KUŹNICZY HUTA ZYGMUNT MPM 6300B Gsdpfx Asivqanofqeil

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Godpfx Ajxddvnofqoil Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: dober (rabljeno), Leto izdelave: 1988, premer struženja nad prečnim suportom: 900 mm, izvrtina vretena: 105 mm, premer struženja: 1.200 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.000 mm, skupna širina: 1.800 mm, skupna višina: 1.550 mm, širina postelje: 650 mm, teža obdelovanca (maks.): 10.500 kg, Motorizirani konjiček CE zaščita za vpenjalno glavo Teleskopski pokrov vodil Stacionarno držalo (luneta) 4-čeljustna vpenjalna glava, premer 1000 mm 3-čeljustna vpenjalna glava, premer 500 mm Gisdpjwrxpbofx Afqel Dvoosni digitalni merilni sistem Dolžina struženja: 5000 mm Premer struženja nad posteljo: Ø 1150 mm Premer struženja nad suportom: 850 mm Vretenina izvrtina: 105 mm Širina postelje: 650 mm Pinola: 140 Ø Hod pinole: 300 mm Vpenjalni stožec vretena: 6Mk Število vrtljajev: 4,5 - 900/min Teža obdelovanca: 10.500 kg Dolžina: 8000 mm Širina: 1800 mm Višina: 1550 mm Teža: 13.800 kg

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Gijdpfowl An Isx Afqsl Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Giedpfsia Rtdjx Afqsl Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: Premer čelne plošče: 1600 mm Skupna potrebna moč: 80 kW Teža stroja pribl.: 25 t Godex Aq E Hjpfx Afqeil Potrebni prostor pribl.: 4,4 x 4,62 m Premer obdelovanca - maks.: 2000 mm Največji premer pri čelnem struženju: 1800 mm Vpenjanje orodja: ISO50 Stroj je bil redno vzdrževan in je v tehnično dobrem stanju. Z osjo C.

Stanje: dober (rabljeno), Leto izdelave: 1989, skupna višina: 6.450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Working capacity: 40 kJ Max. blow frequency: 98 rpm Max. usable blows per minute: 41 Max. ram stroke: 790 mm Machine is dismantled Technical specifications available on request Godpfx Afort Uc Esqsil

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, višina središča: 525 mm, teža obdelovanca (maks.): 5.000 kg, dolžina brušenja: 4.000 mm, premer brusilnega koluta: 1.060 mm, Stroj je bil prenovljen (retrofit) v letu 2024. Krmiljenje Siemens Sinumerik 840D. Giodpfxow Ngm Ue Afqel

Stanje: rabljeno, Leto izdelave: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10,000 (± 2 x 2.5%) / 400 V, Dyn5-11-1, protection class IP23 or IP00, forced air cooling (AF), aluminium/aluminium windings, temperature monitoring unit, fully functional, very good condition, 2 units available Gisdpfx Afequwtxsqol

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Giodod Nb A Nspfx Afqel Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.