Stacionarni odsesovalni sistem

Schuko ECOVAR97

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] Ndodpfx Aleuhb Uhs Dob - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, rotational speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, with STBB HAB S chip container, including complete documentation. Ndjdpfei A Ix Hjx Al Deb

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine Ndedpfxjh Nvyze Al Dob -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer Ndjdpfxjhlp D No Al Djb - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Leto izdelave: 2015, stanje: novo, Shaft furnace Clear height: 1100 mm Clear diameter: 790 mm Outer diameter: 1560 mm External height (without lid): 1480 mm External height (incl. lid): 2300 mm Electrically heated: 40 kW Ndodpfscdi D Dsx Al Dsb Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Maximum temperature: 750°C

Leto izdelave: 2013, stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Ndodpfexw N Uvsx Al Dob Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Vanicek drying chamber with log wagon with entrance and exit gates (hinged doors) with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, electric motor 1.1 kW/400V Dehumidification Ø 50 with actuator Dehumidification Ø 40 with actuator UGL sensors, humidification, heating valve (provided by customer) Control unit, heating coil, fan frame Ndodpfx Aljwxdqks Djb Stacking dimensions 1x12.5, 2x1.20, 2x1.00 m

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), A used, very well-maintained cold circular saw from EISELE equipped with a 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Ndjdpfx Aekfp D Tjl Djb Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865 x 1332 x 2175mm Weight: 460kg For further technical data, please refer to the PDF document. Technical data and dimensions: Subject to change and errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Nodpjh U Damjfx Al Dsdb Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact information.

Stanje: dober (rabljeno), Leto izdelave: 2003, nosilnost: 150 kg, doseg roke: 2.700 mm, Model: KR150 Stanje: RABLJENO Leto: 2003 Krmilna omara: KRC2 Vključeno: Manipulator + krmilna omara KRC2 + vsi kompleti kablov Nodpshakfajfx Al Dedb Za ponudbo in možnosti obnove nas prosim kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in delamo z znamkami KUKA, ABB, FANUC in Motoman.