Stacionarni ekstrakcijski sistem

Schuko Eco Var 04

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Iaedotzld Uepfx Abxeu

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminium angle conveyor belt including mobile undercarriage Horizontal section: 1,100 mm Inclined section: 1,500 mm Angle of incline at bend: 60° Iasdpfx Aoi Igiksbxeu Total belt length: 1,750 mm Discharge height: approx. 1,600 mm Height of horizontal section: 300 mm (infeed height) Conveyor belt width: 500 mm PU conveyor belt incl. carriers and wave edge, petrol matt finish Drive: Motor 0.25 kW, speed 0.2 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and components ready to connect, motor control optional 4x fully swivelling transport castors with parking brake 2 pcs. wave edge 50x35 mm 11 pcs. T-50 cleats centrally welded – 481 mm pitch 2-ply, especially cross-stable Usable width 290 mm, calculated as follows: Crosswise arrangement -70+30-5+290-5+30-70 mm

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips Ijdpfoyk I U Aox Abxeau - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: rabljeno, No. 10019 Various Conveyors / Conveyor Belts Used Consisting of 8 items: Item 1: Blue conveyor belt, approx. 8000 x 800 mm (L x W), previously used for waste Iaodpfxowhp H Nj Abxeu Item 2: Orange conveyor belt, approx. 12000 x 1200 mm (L x W), as new Item 3: Blue conveyor belt, approx. 13000 x 1000 mm (L x W), as new Item 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm (L x W) Item 5: Two turquoise conveyor belts, 1st approx. 10000 x 1600 mm (L x W), 2nd approx. 4500 x 1400 mm (L x W), very heavy-duty – sheet metal floor, both require new motors and gearboxes Item 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm (L x W) Item 8: Green mobile Z-conveyor, approx. 7000 x 500 mm (L x W), new belt, as new Item 9: Green refuse truck loading conveyor, approx. 5000 x 1000 mm (L x W), at refuse truck height for loading waste Sale by customer order, ex location near 85456 Wartenberg, without dismantling, transport or setup Description and price subject to error Dismantling, transport and loading by us available optionally To avoid misunderstandings, an on-site inspection by appointment is possible and advisable Sale as-is Technical data, condition report, year of manufacture, and scope of supply according to manufacturer’s brochure and/or previous owner, without liability Subject to prior sale No warranty is provided on used machinery; sale is strictly "as inspected and approved" Photos and videos are for reference only and do not represent actual scope of delivery Payment terms: Prices excl. statutory VAT, payment before collection or shipping Delivery terms: ex location

Leto izdelave: 2000, stanje: rabljeno, Drais Mannheim / Lödige CoriMix® CM Type: K-TT 700 Motor: 55 kW 1500rpm Fully stainless steel construction (including frame) Iajdpeh H S Hdjfx Abxeu

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins. (Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust characteristics: dust and chips Material throughput: not specified Jet filter cleaning Air volume: approx. 22,000m³/h Disposal type: open Clean air flow: air recirculation Residual dust content: 0.1mg/m³ based on dust 1 unit Filter unit, galvanized - Year of manufacture: 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 pieces - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning: air jet, compressed air - Filter housing made of galvanized steel sheet - Service door, access ladder, standing platform - Tested pressure relief surfaces - Raw gas section as a large expansion chamber - Exhaust nozzle positioned as required on site - Filter substructure in welded steel construction, hot-dip galvanized - Incl. dry fire extinguishing line, C-connection - *Choice of 6 chip bins or large rotary valve* 2 units Clean air fans DER 404/400/18.5-2 - Air volume: 11,000m³/h per fan - Direct drive fans - Galvanized steel sheet - Installed in Multistar series - Electric power per fan: 18.5kW - Total air volume: 22,000m³/h - Total pressure increase: 4,600 Pa 1 unit Pipe components for air recirculation - incl. galvanized ducts - Must be adapted for new site. 1 unit Control cabinet With Siemens S7-1200 PLC Iedpjya Idvsfx Abxjau Dust-tight standard steel sheet wall-mounted cabinet, fully wired as per VDE regulations 0100, 0113 and DIN 57113. Includes all components required for control as well as circuit diagrams. Designed for: · Jet cleaning control · Control of 2 fans · 6x automatic fan start upon machine activation · Pressure monitoring indicator lights · 3x shut-off damper controls · Rotary valve control Dimensions: - Length: 3,960mm - Width: 3,380mm - Height: 5,900mm (may vary depending on configuration) Electrical connection value: - approx. 38kW - 400V/50Hz - Control voltage 230V AC/24V DC Currently in stock

Stanje: zelo dobro (rabljeno), O04018) No. 1 FILTER (extraction substation) - Total air flow: 18,000 m³/h (estimated) _____ O04019) No. 1 FILTER (extraction substations) - Total air flow: 50,000 m³/h (estimated) - Power: approx. 90 kW _____ O04020) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: approx. 30 kW Iasdswrdw Rjpfx Abxsu _____ O04021) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04022) No. 1 FILTER (extraction substations) - Total air flow: 36,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04023) No. 1 FILTER (extraction substations) - Total air flow: ????? m³/h (estimated) - Power: 30 kW - No. 180 filter bags (each with a diameter of 123 mm x 3000 mm length) _____

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), KRAMER GmbH Dust Extractor Filter Year: 2010 Total capacity: 70,000 m³/h Iedpfxeh D E Rdo Abxoau The system can be operated separately as two filters with a capacity of 33,000 m³/h each.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 90135010410, skupna dolžina: 4.300 mm, skupna širina: 2.070 mm, skupna višina: 3.040 mm, skupna masa: 9.000 kg, volumen zalogovnika: 3.000 l, največja hitrost vrtenja: 10 obr/min, širina rezila: 40 mm, vrtilni moment: 40.000 Nm, moč: 88 kW (119,65 KM), širina rotorja: 900 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, širina krmilne omare: 300 mm, dolžina elektro omare: 900 mm, višina krmilne omare: 900 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Schomberg dvogredna rotorska drobilka ES 90/135-D z osnovnim podstavkom, lijakom in krmilno omaro Siemens S7 1212C. Visoko zmogljiv drobilnik kovin 88 kW za predelavo odpadne kovine, reciklažo plastike ali ravnanje z odpadki. Iajdpfx Abow E H Npjxsu

Stanje: novo, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various production areas and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. Iedpfx Abowwtuisxoau ECO JET series units are equipped with clean-air side fans that draw dust- and chip-laden air to the filter unit. The high-performance DUO models feature two fans operating in parallel. A flange at the filter unit inlet allows for connection of custom pipe diameters. The aerodynamically optimized airflow in the separation chamber ensures that coarse particles are separated directly before reaching the filter bags. Remaining dust collected by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system; the separated material is discharged into mobile collection containers beneath the filter. Applications: - Extraction at production machines, machining centers, pipe systems with multiple suction points - Direct extraction for continuous operation - Suitable for industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedics industry, and many others Advantages: - Wide range of standard extraction systems with numerous customer-specific customization options - Consistently high suction power thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, since 100% recirculation mode is possible in many cases - Compact design requiring minimal space - Suitable for indoor and outdoor installation - Available in ATEX-compliant configurations - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding according to Module 4