Stroj za robne trakove

SCHUGOMA KANTENKING - HTT3030

Stanje: novo, CATALOG NUMBER HZ0001 PRODUCT FEATURES Standard equipment includes mobile chip containers, equipped with a clamping system allowing for a tight connection between the container and the machine frame. This enables the achievement of high negative pressures without losses at connection points. Contaminants from the filter fall directly into hermetically sealed containers designed for quick unloading, featuring a special suspension system as well as mobile casters for easy and fast transport and maneuvering. 5.5 kW vacuum fan / 6,500 m³/h at 2,800 Pa, operates on a turbine principle. The sound-insulated fan housing significantly reduces noise emissions during operation. Tsdpfxodf S Szj Abgjf The certified control cabinet allows for continuous monitoring of correct operation and can be positioned freely at a distance from the machine. Standard with an integrated fan control system and filter media cleaning system. ADVANTAGES - new machine - CE certificate - high efficiency - professional quality Scope of delivery: - Polyester filter, 5 microns - 2 containers - Wheel set - Filter cleaning with vibration system and control TECHNICAL DATA - Extraction capacity approx. 6,500 m³/h - Motor power 5.5 kW - Rotational speed: 3,000 rpm - Voltage: 400 V, 50 Hz - Extraction nozzle: 280 mm - Filter area: 16.3 m² - Suction speed: 28 m/sec - Number of filters: 35 - Negative pressure: 2,800 Pa - Filter category: G - Filter material: polyester - Dimensions (L/W/H): 921 x 1,982 x 2,271 mm - Weight: 350 kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated at exchange rate 4.2 PLN/EUR (If the exchange rate fluctuates significantly, the price may change)

Stanje: novo, Typ: R-RP1300 Arbeitsbreite: 1300 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe (Dicke): 3–200 mm Vorschubgeschwindigkeit: 0–30 m/min Gesamtmotorleistung: 30,37 kW Motorleistung erste Einheit: 15 kW Motorleistung zweite Einheit: 11 kW Staubreinigungsbürste: 0,37 kW Vorschubmotor: 4 kW Hubmotor: 0,37 kW Walzendurchmesser erste Einheit: 240 mm Walzendurchmesser zweite Einheit: 210 mm Schleifbandabmessung: 1330 x 2200 mm Tjdpodflqasfx Abgjf Betriebsdruck (Luft): 0,6 MPa Absaugleistung: 9.600 m³/h Transportabmessungen: 2.700 x 2.100 x 2.400 mm Gewicht: 3.300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles Tsdpfsxfaf Ujx Abgof 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Tsdpfxod Nuu Hj Abgof Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: novo, Leto izdelave: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors Standard configuration with optional inlet connection on top or bottom Uniform filter bags for all variants Tedpfx Ajfc A Urebgjf Discharge into chip collection bins The modular AL-KO AAS series models are available in optimally matched performance categories with energy-saving, low-noise motors that drive the raw air side fan, ensuring particularly effective positive-pressure filtration. Durable quality components and an all-metal housing made of galvanized sheet steel provide both investment security and a wide range of retrofit options. The especially attractive price and short assembly times also contribute to making the AL-KO AAS definitely the right choice. Technical Data AL-KO AAS 3013 Inlet connection: 200 mm Rated airflow: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum negative pressure: 2,700 Pa Filter surface area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor output: 3.0 kW / 400 V Dimensions (LxWxH): 2486 x 578 x 2115 mm Weight: 139 kg

Stanje: skoraj kot novo (rabljeno), Horizontalne jeklene posode iz ogljikovega jekla, 73.000 l Dimenzije: 3x 11 m Debelina cilindra: 8 mm Tsdpfxoibh S Ho Abgef Debelina dna: 12 mm Opremljene z lestvijo.

Stanje: novo, Leto izdelave: 2023, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Todpfok E Hmtsx Abgsf Height increased by approx. 50 mm.

Stanje: novo, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Outstanding compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed Features: Compression Concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-adjusted via frequency inverter Controller: Graphic control unit C55DD Tedpfx Abeixt I Hegsf Refrigerated Dryer: Integrated, refrigerant R513A Filtration: Includes cyclone separator Tank: Horizontal, painted Performance Data: Volume flow at 7.0 bar operating pressure: 0.26–2.26 m³/min Operating pressure min./max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil volume: 5.2 liters Dimensions and Weight: L x W x H: 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air tank capacity: 270 liters

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, HOLZ-HER Sprint 1329 - rabljeni robni lepilni stroj v dobrem stanju. Todpfxjxducrj Abgjf - Letnik: 2015 - vključno z vračalnim sistemom BARBARIC (letnik 2017) - na voljo od konca novembra/začetka decembra 2025 Za vprašanja nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Prodajem kantovalni lepilni stroj Biesse JADE 240, godina proizvodnje 2019. Posebna ponuda: Mašina je skoro NOVA! Konfiguracija: - Ulazna zona ručno podešavanje - Spojno glodanje pneumatski podesivo - Lepljenje ivica ručno podešavanje - 2 lepka rezervoara za EVA lepak - Zona pritiska ručno podešavanje - Presecača pneumatski podesiva - Glodanje radijusa ručno podešavanje - Zaobljeni agregat sa 2 motora ručno podesiv Tjdsxncrvjpfx Abgof - Povlačna radijus oštrica ručno podesiva - Površinska povlačna oštrica pneumatski podesiva - Polirke Prednji separator za ubrizgavanje Centralno podmazivanje Gornji valjci za uvod Ručna podešavanja visine Visina materijala: 10-60 mm Debljina ivice materijala: 0,4-8,0 mm Brzina uvlačenja: 12 m/min. Samo 9250 m lepljeno. Mašina je skoro NOVA! CE oznaka. Uključuje kompletnu dokumentaciju i CD-ove. Vrlo dobro stanje! Dostupno odmah!