Vodilo prečnega valja

Schneeberger 9700

Stanje: rabljeno, TEHNIČNI PODATKI - Razdalja med konicami: 600 [mm] - Višina konic: 175 [mm] - Nagib mize: 11 [°] UNIVERZALNI NOSILEC BRUSNEGA KOLESA – VRETENO - Mere levega brusnega kolesa: 400 x 50 x 127 [mm] - Mere desnega brusnega kolesa: 225 x 20 x 76,2 [mm] - Moč motorja: 3 [kW] - Hitrost vretena: 1500 / 1700 / 2200 - Usmerjenost nosilca brusnega kolesa: 270 [°] NOSILEC OBDELKA – VRETENO - Usmerjenost nosilca obdelka: 360 [°] - Hitrost vretena obdelka: 20 – 400 [min⁻¹] - Notranji stožec: Morse 5 - Moč motorja: 0,9 [kW] PROTIVRETENO - Notranji stožec: CM4 - Hod pinole: 30 [mm] DIMENZIJE - Potreben prostor: 2580 x 1680 [mm] - Višina: 1670 [mm] - Teža: 2200 [kg] OPREMA - FISCHER notranje vrtalno vreteno: 14.000 [min⁻¹] Fpodpfxjuhbywo Afqob

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Fedst Hxamjpfx Afqjpb Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2000, Stanje: dober (rabljeno), CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Fpjdpfxsfrbcko Afqeb Complete machine documentation available.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Fodpforz Nflox Afqopb Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Leto izdelave: 1985, Stanje: delavnici obnovljeno (rabljeno), REFORM Type AR 10 Model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Modicon control unit 6-step magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Infinitely adjustable grinding motor infeed: 0.01 mm – 0.1 mm Fpodjd E Np Ejpfx Afqjb Hydraulic oscillating drive New power supply cables between machine and control cabinet

Stanje: novo, Leto izdelave: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length: / mm Machine weight: approx. 210–260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the outer circumference or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, home workshops, laboratories, training demonstrations, etc. TECHNICAL DATA Maximum stock removal: not more than 0.03 mm Maximum peripheral speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Fpsdpfx Afsvuuvkoqob Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forward/backward and left/right. The grinding head can be raised and lowered vertically. The entire machine is built with high rigidity. The grinding head runs smoothly. Compact design and low noise emission. The work enclosure is available separately. The machine is lubricated using a manual oil pump. To lubricate, simply pull out the handle. If you need other special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: The radial run-out of the taper bore axis at a distance of 100 mm from the proximal end of the main spindle is 0.01~0.02 mm.

Leto izdelave: 1981, Stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Spindle taper: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Fpedpfx Afsihp U Dsqeb Horizontal spindle speed range: 31.5–1600 rpm Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions. Fpodpjw U Ry Njfx Afqjb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Compact precision CNC rotary table, suitable for single-part or small batch production in fine mechanics. Can be mounted horizontally or vertically. You cannot buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, slotting, milling, or use on a tool or surface grinding machine. Square, hexagonal, and gear milling of any division, or 3D machining, are possible. Precision worm gear drive with 100:1 ratio. Output torque well over 25 Nm. The drive is provided by a controlled stepper motor with 1.8 degree step angle, 3.2A current, holding torque 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest adjustment precision. The pair is supported by four ball bearings, set with no backlash and is also adjustable. The solid, one-piece output spindle is equipped with a faceplate (d=108 mm) featuring an internal taper MK1 and 10.3 mm through bore (optional internal thread M12). The electronic control unit included in the package is a handy module with 14 travel programs, 2 reference point operations, step monitoring, and a power supply. Optimised pre-programming is possible in 360 (for milling operations), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, and 0.02 degree incremental repeat cycles. Forward and reverse operation as well as cycle pauses are, of course, programmable. With the software, you can program travel programs and cycles, configure absolute or incremental movement values, and continuously monitor the actual position of the rotary axis. Via an output, you can receive start impulses from your NC machine. This allows for fast and easy manufacture of complex scale graduations, cross holes, or gears. Fpsdpfxed Erdre Afqsb Additionally, you can now sequence multiple different movement angles with a single start pulse, e.g.: incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees—with or without pauses, as well as reverse movement. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron, or Gravograph. NEW: All 16 movement steps, as well as start and reference commands, can now optionally be externally controlled by your NC controller via M-functions. Optional: Air purge system with splash guard. We can offer standard clamping devices for your applications, and additionally can manufacture custom clamping fixtures quickly and cost-effectively to meet your specific requirements. Optional Accessories: Three-jaw chuck 80 mm: €125 #600011 Three-jaw chuck 100 mm, through bore 25 mm, with adapter plate (center height raised to 80 mm): €300 #600021 Tailstock, adjustable height 60–80 mm: €150 #600030 Mount for ER 25 collet chuck with nut: €125 #600031 USB data cable for programming via PC: €150 #600032 Programming of your travel angles: €40 #600033 Test travel program & final inspection protocol: €100 #600036 ER 25 collet set up to D16 mm, 10 pcs: €125 #600037 Mount for ER 32 collet chuck with nut up to D20 mm: €125 #600097 Control cable with magnetic switch (reed contact) for automation without NC machine output: €25 #600099 Acceptance / program / aluminium case / software setup: €80

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Fsdpfxjuwv Ide Afqspb Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.