Večnamenski udarec

Schüco Artikel-Nr. 296 566

Stanje: zelo dobro (rabljeno), Multifunction punch, punching machine, hole punch, pneumatic hole punch - Item No.: 296 566 - Weight: 170 kg Nsdeb A Hl Repfx Ag Teku

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Nsdpfxsfxyhfj Ag Tjku Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Multi-function punch, punch press, hole-punch, pneumatic hole punch -pneumatically operated Nodpfx Ajn Sru Heg Tjku

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau (Kunststofffensterfertigung) der Marke URBAN, bestehend aus: 1. Zwei-Kopf-Schweißautomat; Hersteller: URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, in einwandfreiem Betriebszustand. 2. Nutfräsmaschine; Hersteller: URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, in einwandfreiem Betriebszustand. 3. Zweikopf-Gehrungssäge; Hersteller: RAPID, Modell: DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird zusammen mit Spänesauger mit Filtersäcken verkauft, in einwandfreiem Betriebszustand. 4. Armierungssäge (Stahltrennsägemaschine); Hersteller: MACC, Modell: NEW 275, Seriennummer: 88266, Baujahr: 2008, in einwandfreiem Betriebszustand. Nksdpeucl Dcjfx Ag Teu 5. Kopierfräse (Pantograph); Hersteller: URBAN, Modell: MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, in einwandfreiem Betriebszustand. 6. Ständerfräse; Hersteller: URBAN, Modell: M7CRH-100149891, Seriennummer: 559, Baujahr: 2008, in einwandfreiem Betriebszustand. 7. Entgratmaschine mit 2 Fräsaggregaten; Hersteller: URBAN, Modell: SV 280, Seriennummer: 29342, Baujahr: 2008, in einwandfreiem Betriebszustand. 8. Glasleisten-Säge; Hersteller: URBAN, Modell: GLS 102; Seriennummer: 102015; Baujahr: 2010, in einwandfreiem Betriebszustand. Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8 h (abhängig von der Anzahl der Bedienpersonen). Die Linie wurde von 2010 bis 2014 nur sehr wenig und nicht annähernd mit voller Kapazität genutzt. Einzelmaschinenverkauf auf Anfrage möglich. Nettopreis für die komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l Nedof E Higepfx Ag Tsku - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Stroj za spajanje vogalov ELUMATEC EP 124, leto 1999 Stanje: zelo dobro Tehnične specifikacije: - Višina stiskanja: 140 mm - Sila stiskanja: 70 kN (7 t) - Pnevmatski pogon Nodpfem Tipajx Ag Tsku - Napajanje: 230 V, 1~, 50/60 Hz - Dovod stisnjenega zraka: 7 bar - Poraba zraka na delovni cikel: 35 l

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Nedpfx Ajpug D Esg Tjku Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Stanje: novo, Leto izdelave: 2026, Why is it worth choosing our folding benches? Firstly, because this device is a bestseller at Prod-Masz. It is a CE-certified product, confirming the highest quality, precise CNC manufacturing, and the safe use of our bending machines throughout the EU. In addition, we offer a 12-month manufacturer's warranty regardless of the intensity of use. Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Titanium-zinc sheet: 0.8 mm, aluminium sheet: 1.5 mm, copper sheet: 1.25 mm - Bending angle: max. 145 degrees - Cutting with rotary shear across the entire working width - Bending beam thickness: 15 mm - Cutting with rotary shear across the entire working width - Upper beam can be raised into three positions - Upper beam lift: 80 mm - Angle scale Nkjdpoc Rtv Tofx Ag Tju - Weight: approx. 180 kg - Rotary shear (max. cutting capacity 0.8 mm / steel) for an additional €350 - The machine complies with CE regulations and comes with a 12-month warranty - Swivel castors included Delivery cost: €180.00 to Austria (AT) Short delivery times! Order today - delivered next week! Cash payment on delivery! No risk! We look forward to hearing from you!

Leto izdelave: 1987, Stanje: dober (rabljeno), for cutter diameter up to max.: 300 mm Saw stroke manually adjustable: 550 mm Manual feed via spindle: 150 mm Height adjustment via spindle by hand approx.: 130 mm Nkodjghl Emepfx Ag Tju Table semicircle diameter: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx.: 1000 x 900 x 1300 mm Weight approx.: 100 kg