Sartorius Stedim biotech BioWelder 16370

Sartorius 16370

Sartorius Stedim Biotech BioWelder 16370

The BioWelder operates using a thermal welding cycle, which does not require laminar airflow. During this welding process, the blade is kept sterile and endotoxin-free throughout the entire procedure.

The inserted tubing is cut with a blade and then fused together by the device. The cycle is fully automated and releases the finished weld only after the process is complete.

Various programmable holders enable welding of the same type of thermoplastic tubing (e.g., C-Flex, Sanipure, Pharmed) with outer diameters from 6.4 mm (1/4") to 19.0 mm (3/4").

Features:

- Fully automatic operation
- Welds thermoplastic tubes up to 3/4 inch outer diameter
- Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed, and Sanipure tubing
- True Thermal Weld provides exceptional joint strength
- Aseptic connections without the need for a laminar flow hood
- Data output via printer
- Compact, portable design
- Simple to validate, comes with validation equipment
- Capable of welding a wide range of tube diameters

Includes: Tube Holder, SH1 5/8″ (15.9 mm OD) inserts (1 set)

Manufacturer specifications:

- Housing: Stainless steel
- Interface: RS232 for printer
- Blade: Cr-Ni alloy, single-use
Hedpfekq Ay Iex Ab Sow
- Ambient temperature: 20°C–30°C (ideal: 22°C)
- Relative humidity: 20%–80% (ideal: 60%)
- Temperature sensor: Type K, calibrated
- Max. tube OD: 3/4"
- Min. tube OD: 1/4"
- Welding cycle: 60–90 seconds, depending on tube size

Find more BioWelders – new and used – in our shop!
International shipping rates available on request!

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.