Debelinec

SAC RS53s

Leto izdelave: 2026, stanje: novo, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and ensure exceptionally gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning system and automatic belt control guarantee consistently high quality throughout the entire pressing process. Kodpfxov Sq S Ne Af Sonb The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially developed water nozzles. Only a compressor with 8 bar pressure and a ½” water connection are required for cleaning. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information • Rated capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly operation • Easy to clean • Mobile machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Feed height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Options: Juice collection tray ISW 100 Automatic juice discharge

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Knodpfsrigxyjx Af Ssb Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Knedpfx Afedqzcxj Sob Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, številka stroja/vozila: 007928, Pozicija 1: Krtačni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lakirni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Sušilec laka CEFLA-EASY 2000 + TR2V-FV3 Kjdpfxewu Acko Af Ssnb

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Saw-Moulder-Surface Planer-Thicknesse-Mortiser Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tilting: 0°-45° - Max. cutting height at 90°/45°: 75/60 mm - Sliding table: 430 x 1300 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer and Thickness Planer: - Cutter block diameter: 75 mm - Cutter block with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. planing width: 250 mm Knsdpfxsvz E Sio Af Sjb - Max. stock removal, surface planer: 5 mm - Fence tilt: 0°-45° - Max. thicknessing width: 248 mm - Max. stock removal, thicknesser: 2.5 mm - Max. workpiece height, thicknesser: 190 mm - Feed speed: 8 m/min - Surface table size: 1085 x 256 mm - Thicknessing table size: 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022,

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Ksdpovxlq Hjfx Af Senb Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-1100 waste compactor is ideal for compacting your 1100 L waste and recycling bins. It enables you to easily and safely compress bulky waste and recyclable materials to a minimum of their original size. Kedpen Argisfx Af Ssnb By compacting these waste and recyclable materials, you achieve a volume reduction of up to 75%, significantly reducing your disposal costs and also creating a safer and cleaner working environment. Pressing force: 3.5 tons Compaction: up to 75% (depending on material) Machine dimensions: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Press cycle time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly and safe two-hand lever operation Optimized use of waste bins Reduces the number of waste bins required No need to enter the waste container Reduces the frequency of waste collection A quality product 'Made in Europe' Suitable for compacting: - Residual waste - Recyclables - Paper and cardboard - Green waste - Light recyclables Additional options: - Annual maintenance with UVV inspection - Machine color available in any RAL shade - Machine available galvanized - Compaction plate for 660 and 770 L bins - Power supply 380 - 400 V (three phase) Baling press, paper press, waste paper press, cardboard baler, cardboard press, film press, paper baler, waste baling press, waste press, recyclable material press, waste compactor, waste press, residual waste press

Leto izdelave: 1988, stanje: dober (rabljeno), številka stroja/vozila: D 05103, Ref. No. 13439 Kodpsk D Ewgefx Af Ssnb Technical Data: - Polishing disc/grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions approx. 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Required space approx.: W 1100 x H 2450 x D 800 mm - Weight approx.: 300 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Volumetric flow rate: 1550 m³/h Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Inlet nozzle diameter: 150 mm Required space: 1100 x 500 x 2450 mm Weight: 133 kg Knedpfjvitd Aox Af Sjb