Sekalnik lesa

Rudnick & Enners RE-TH 250/650/5

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Giodpfogwqk Ssx Aa Uju Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Rabljena Andritz Paladin 600B Vključuje kombiniran nerjavni dozirni polž in mešalnik, 2 x 55 kW motorja, drugi motorji po dogovoru Notranjost pregledana pred 2 leti Vključen okvir za menjavo valjev in matric Godpfjx N T Uaex Aa Uoiu

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing Gisdpfowvqkljx Aa Uou • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Glavni motor 5,5 kW Brezstopenjska regulacija števila vrtljajev 2000 - 6000 min⁻¹. Predrezilni motor 0,75 kW Največji premer žaginega lista 500 mm Elektromotorno nastavljanje višine in nagiba žaginega lista Upravljanje preko zaslona na dotik Upravljalna plošča v višini oči Dvojni valjčni voziček 3000 mm Paralelni prislon z elektromotornim nastavljanjem Kotno-kapni prislon z elektromotornim nastavljanjem prislonskih loput, Giedezab S Tspfx Aa Uou ročno nastavljanje kota z avtomatskim kompenziranjem dolžine, rezanje do 3500 mm

Stanje: rabljeno, No. 3264 Gsdpfx Aasyzr Tfs Ujiu Complete Sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Comprising: - Log cross-cut table with driven conical rollers Hecht length measurement with remote-controlled light barriers - 1 transverse conveyor to saw frame 7000 x 5500 mm (LxW) Cam chains in mint condition - 1 transverse conveyor 3800 x 4000 mm (LxW) - 1 roller conveyor in front of the frame, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for model timber, cross withdrawal with 2 switching flaps - Fast clamping carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feed in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year 1994 Passage width 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log alignment with adjustable laser, round timber measurement Hecht, tensioner Jansen, hangers, 60 saw bands, setting gauge - Powered splitting wedge with chain bed Möhringer 230-292, year 1994 With pre-cutting, light barriers and laser for adjustment - 1 roller conveyor 4000 x 1400 mm (LxW), with corrugated rollers, cross withdrawal with air cylinders - 1 S-conveyor with buffer 3500 x 4000 mm (LxW), Albert pusher made from square tubing - 1 S-conveyor 3000 x 5500 mm (LxW), motor with adjustable slip coupling, function monitoring, pusher from angle steel - 1 under-table cross-cut saw Paul 15 AO, year 1992 - 1 double edger Paul KME 2 / 750 R, year 1988 With chip separator, right bushing motorized adjustable, inline cross-cutting, length sorting, presetting programs Österle - 1 conveyor belt 7400 x 400 mm (LxW) - 1 conveyor belt 4000 x 400 mm (LxW) - 1 conveyor belt 3000 x 500 mm (LxW) - 1 trough conveyor approx. 6500 x 500 mm (LxW), inclined, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm (LxW), inclined, for woodchips - 1 trough conveyor HOLTEC, horizontal, with left/right feed for box distribution - Drum chipper HAAS, passage width 600 mm, passage height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Setter VOLLMER GSA, year 1996 - Frame saw sharpening machine VOLLMER (minor repairs required, feed cylinder bent) Sale on behalf of a customer, ex location near 34125 Kassel, without dismantling, transport or installation Dismantling, loading, and transport available as an option at extra cost Errors in description and price reserved To prevent possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is as-is Technical specifications, condition description, year of manufacture, and scope of delivery are according to manufacturer brochure or previous owner, without guarantee Interim sale reserved For used machines, all warranties are excluded; the rule applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus legally applicable VAT, payment before collection or dispatch Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 1995, Used van Aarsen C750 Pellet Mill Gijdpfxsv Skrie Aa Uou Includes feed screw conveyor, mixer, 160kW IE3 WEG motor (alternative motor upon request) Automatic roller adjustment Internal components overhauled 2-3 years ago Includes rollers & base frame Includes tool kit for roller and die change

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Gijdpfx Aaek Nn Ils Uju

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno), Pneumatic setting and leveling device for band saws. Gjdpfsdy A A Njx Aa Ujiu

Stanje: rabljeno, Valon Kone VK26M Mit Einlauf- und Auslaufband. Gsdpfovgtz Nox Aa Ueiu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem Gedpjtkt Tpsfx Aa Ueiu