Mizna rezkalnica ROBLAND

ROBLAND Tischfräse

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Lhsdsw Sy T Hspfx Aacsc Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Five-head four-sided planer Steton. Five-head four-sided planer Steton. The machine has been serviced and does not require any additional investment. Technical specifications: - Maximum working width: 23 cm - Maximum working height: 13 cm - Spindle diameter: 40 mm - 1 - Bottom horizontal: 23 cm - 2 - Right vertical: 13 cm - 3 - Left vertical: 13 cm - 4 - Top horizontal: 23 cm Ljdpfx Aoi Apuhoacshc - 5 - Universal soundproof cabin, 360 degrees - Electric thickness adjustment - Two feed speeds

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2000 x 3010 x 1250 mm Weight: 400 kg Total power requirement: 4 kW Combined circular saw and spindle moulder KSF-315-2000 Saw: - Table size: 860 x 450 mm - Table height: 850 mm - Table extension: 500 x 310 mm - Table widening: 800 x 880 mm - Outrigger table with roller: 750 x 580 mm - Sliding table: 2000 x 270 mm - Rip capacity (cutting length): 2000 mm - Max. saw blade diameter: 315 x 30 mm - Max. cutting height 90°/45°: 100 / 80 mm - Cutting width at parallel fence: 1270 mm - Main saw blade speed: 4500 rpm - Scoring blade speed: 8500 rpm - Scoring blade diameter: 2-100 x 20 mm - Extraction port diameter: 100 mm - Motor power S1 100%: 3.8 kW Spindle moulder: - Spindle diameter: 30 mm - Height adjustment: 100 mm - Table insert diameters: 80 / 100 / 140 / 190 mm - Clamping length of spindle: 100 mm - Max. tool diameter: - Profiling: 180 mm - Tenoning: 200 mm - Spindle speeds: 1800 / 3000 / 6000 / 9000 rpm - Motor power S1 100%: 2.8 kW - Voltage: 400 V - Overall dimensions: W=2000 mm, D=3010 mm, H=1250 mm - Total weight: 400 kg Standard scope of supply includes: - Table widening with right-side fence rod, which can be folded down to save space - Robust and smooth parallel fence with quick release - Tilting and height-adjustable saw blade with scoring unit - Cast iron table with rear and right table extension with support leg - Extendable fence with flip stop - Roller on cross table facilitates positioning of workpieces - Cutting width right of saw blade up to 1330 mm - Fitted with high-quality two-piece scoring saw blade - High-quality spindle moulder fence with hold-down system and fine adjustment - 4 spindle speeds as standard - Electronic speed display via LED - Max. cutter diameter: 200 mm - Large, removable handwheel for spindle adjustment Delivery contents: - 2-piece carbide (HM) scoring saw blade - Carbide (HM) saw blade 315 x 30 mm Z 40 - Mitre gauge Ljdpfx Aajvz Hgzocshc

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Lhedjvwfqwepfx Aacoc Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, Leto izdelave: 2023, največja višina reza: 200 mm, skupna masa: 700 kg, največja širina rezanja: 660 mm, premer diska: 600 mm,

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 2200 x 1800 x 1200 mm Weight: 650 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 320-2000-230 V Saw – Spindle Moulder – Jointer – Thickness Planer – Mortiser Jointer: - Max. working width: 320 mm - Total table length: 1500 mm - Max. depth of cut: 5 mm - Jointer fence dimensions: 1100 x 155 mm - Jointer fence tiltable 90°–45° - Safety cutter block with reversible knives Ø 100 mm, 3 knives - Speed: 4600 rpm - Jointer and thickness planer motor: 2.2 kW / 230 V Thickness Planer: - Max. working width: 316 mm - Thickness table length: 600 mm - Max. depth of cut: 4 mm - Min./max. workpiece height: 4 / 230 mm - Feed speed: 7 m/min - Extraction port Ø 120 mm Circular Saw: - Max. cutting length: 2000 mm - Max. cutting width: 630 mm - Max. cutting height at 90°: 102 mm - Max. cutting height at 45°: 72 mm - Min./max. saw blade diameter: Ø 250 / Ø 315 mm - Speed: 4000 rpm Lhodevz E Rropfx Aacjc - Parallel fence length: 1100 mm, with fine adjustment - Saw blade tiltable 90°–45° - Motor: 2.2 kW / 230 V - Extraction port Ø 120 mm - Scoring unit 0.75 kW, speed 8000 rpm (OPTION) - Mitre fence 900 mm with eccentric clamp Spindle Moulder: - Spindle diameter: Ø 30 mm - Spindle adjustment: 160 mm - Clamping height: 125 mm - Max. tool diameter: Ø 250 mm - Table opening: Ø 190, 160, 105, 65 mm - Max. tool Ø under table: 180 mm - Motor, pole-changing: 2.2 kW / 230 V - Speeds: 1400/3500/6000/8000 rpm - Spindle fence with integral rule: 500 mm - Extraction port: 2 x Ø 120 mm Dimensions: L = 2200, W = 1800, H = 1200 mm Weight: 650 kg

Stanje: rabljeno, Leto izdelave: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEED Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as is, without warranty SPINDLE MOULDER SPECIFICATIONS: - Spindle diameter: 50 mm Usable length above table: 150 mm Vertical stroke of spindle: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE CONFIGURATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Front table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Through-table tool capacity: Ø320 x 95 mm - Wooden fence jaws: 530x150 mm Lhsdpfsx Igzqox Aacjc Fine adjustment for hood and stop barrels Maximum tool diameter for fence work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated crosscut fence with adjustable stop Adjustable stabilizers ensure perfect rigidity of the carriage slide. - Adjustable tool approach support with eccentric clamp - Fence angle adjustment graduated from 0° to 45° - Tenoning guard - Max tenoning tool diameter: Ø350 mm Fitted with power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds mechanical x electrical OTHER FEATURES: - Power supply: 380V, 3-phase + ground, 50 Hz - Manual star-delta starter - Installed power: 6.25 kW - Motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Guide fence protector - Dust extraction for spindle hood Ø120 mm Bottom port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Stanje: zelo dobro (rabljeno), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Ljdpfxewtl N Do Aacohc Table width 35 cm Support extendable up to 80 cm Request more information

Stanje: novo, Leto izdelave: 2026, A420 Popolnoma avtomatska žaga za masivni les 9 m Popolnoma avtomatsko razrezovanje majhnih do srednje velikih kosov lesa s preprosto uporabno avtomatizacijo. Preprosto odložite les in stroj ga bo samodejno zaznal ter razrezal glede na naloge z visokoločljivim pozicioniranjem materiala s servomotorjem. Uvoz delovnih seznamov iz Excela prek WIFI za učinkovito upravljanje obsežnih seznamov rezanja. Vaša popolnoma avtomatska žaga je lahko opcijsko dobavljena kot optimirna linijska žaga. Za vsak kos lesa, ki ga položite za rezanje, ne glede na dolžino, laserski senzor izmeri njegovo dolžino. Naš zmogljiv optimizacijski algoritem nato uporabi vaš seznam rezanja in izračuna optimalni vrstni red rezov, da se zmanjšajo odpadki. Vse to se izvaja sproti, med delovanjem stroja, brez potrebe po dodatnem posegu operaterja. • Popolnoma avtomatski postopek rezanja z avtomatskim podajanjem in razrezom na dolžino. • Preprost uporabniški vmesnik za avtomatsko delovanje – vnesite nalogo in začnite rezati v nekaj sekundah. • Enostavno rezanje posameznih kosov, serij ali obsežnih excel seznamov. • Oddaljen vnos excel seznamov nalog prek WIFI z naprednimi možnostmi mapiranja podatkov. • Popolnoma nastavljive hitrosti rezanja in podajanja lesa za največjo produktivnost. • Samodejni izpis etiket za posamezne kose na podlagi podatkov iz delovnega seznama (ročna uporaba etiket, opcijsko). • Tiskanje neposredno na material med linijsko proizvodnjo brez potrebe po operaterju (opcijsko). • Možnost izpisa ali skeniranja črtnih kod ali QR kod za vnos nalog (opcijsko). Primerna za: Lodpfx Aael Tg U Uscjhc • Proizvodnjo korit in zabojev • Izdelavo izdelkov iz lahkega lesa • Dekorativno proizvodnjo • Rokodelske lesenine • Proizvodnjo pohištva Model: A420 Dolžina: 9 m Dolžina materiala: 8580 mm Kapaciteta potiska: 20 – 40 kg Programska oprema: Optimirnik VRHUNSKI STROJI AVSTRALSKE IZDELAVE.

Stanje: rabljeno, Leto izdelave: 2015, skupna dolžina: 2.000 mm, skupna širina: 2.050 mm, skupna višina: 1.700 mm, Poids : 850 kg - Année de fabrication : 2015 - Documentation disponible : Non - Certificat CE présent : Non - Numéro de série : 30031501 - Puissance moteur principal [kW] : 9,2 - Alésage de l’axe de la lame [mm] : 30 - Diamètre min. de la lame [mm] : 300 - Diamètre max. de la lame [mm] : 400 - Longueur de la table [mm] : 1800 - Largeur de la table [mm] : 1790 - Inclinaison : Manuelle - Inclinaison max. [°] : 40 - Tension [V] : 400 - Fusible [A] : 20 Ljdpfsydldbex Aacohc - Puissance [kW] : 9,2 - Dimensions de transport : 2000mm x 2050mm x 1700mm (L x l x h) - Poids de transport [kg] : 850kg - Nombre de colis pour le transport : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout l’équipement industriel. Yorick Diebels