Hydro implement carrier brane z okroglim kolobarjem

Reform M14

Stanje: dober (rabljeno), Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Centre distance: 2000 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Tool shank section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle head, size 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of spindle speeds: 24 Longitudinal feeds: 0.092 - mm/rev Cross feeds: 0.046 - mm/rev Metric threads: 0.5-112 mm Inch threads: 1/4 - 56 TPI, G1" Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centres max.: 00 kg Workpiece weight max. – unsupported: 750 kg 3-jaw chuck Röhm, Ø Machine dimensions (approx.): 4600 x 1900 x 1600 mm Weight (approx.): 4300 kg Number of feed and thread settings: 99 Ihsdpexn Ty Rsfx Af Tjt Accessories: - 3-axis digital readout - Mobile chip guard - Coolant system - Rapid traverse on all axes - Power cross-feed on top slide - Taper turning attachment - Thread cutting device for facing threads - Multifix tool holder, size C - Longitudinal and cross stop - Fixed steady rest – 300 mm - Travelling steady rest – 180 mm - Change gears for special threads - Taper sleeve for main spindle MK 6 - Fixed centre MK 6 - CE conformity

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Ijdpfx Aeu Ixydef Tjht Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.145 mm, ・Maximum lateral reach: 3.40 m ・Breakout force with bucket: 3427 daN ・Dump angle: 12° ・Rollback angle: 117° ・Turning radius (over wheels): 3.31 m ・Operating weight (with forks): 4800 kg Iodjxu N Auspfx Af Tsht ・Tyres: Pneumatic ・Lifting time: 8 s ・Lowering time: 5.40 s ・Telescopic boom extension: 5.60 s ・Telescopic boom retraction: 4.30 s ・Crowding time: 3.50 s ・Dumping time: 3.60 s ・Number of cylinders / displacement: 4 - 3331 cm³ ・Rated engine power – output (kW): 75 HP / 55.40 kW ・Max. torque / engine speed: 265 Nm @ 1400 rpm ・Tractive force: 3550 daN ・Number of gears (forward / reverse): 2 / 2 ・Max. travel speed: 24.90 km/h ・Parking brake: Automatic negative parking brake ・Service brake: Oil-immersed disc brakes on front axles ・Pump type: Gear pump ・Hydraulic pressure: 235 bar ・Engine oil: 11.20 l ・Hydraulic oil: 115 l ・Fuel tank capacity: 63 l ・Cab noise level (LpA): 76 dB ・External noise level (LwA): 104 dB ・Hand/arm vibration: < 2.50 m/s² ・Steering wheels (front / rear): 2 / 2 ・Drive wheels (front / rear): 2 / 2 ・Cab safety/certification: Cab approved to EN 15000 / Cab ROPS - FOPS Level 1 ・Controls: JSM

Stanje: rabljeno, Leto izdelave: 1991, Sheet width: 2050 mm Sheet thickness: 3.5 mm Distance between uprights: 2100 mm Upper beam stroke: 250 mm Adjustment upper beam: 80.0 mm Working height: 920 mm Total power requirement: 6.0 kW Weight: 2910 kg Dimensions (L x W x H): 3185 x 875 x 1450 mm Equipment: - Robust electrically powered folding / swaging machine Iedpfew U U Ukjx Af Toht - Fitted with dynamic, high-performance drive motors - Manual or automatic operation selectable - Control panel positioned front right - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tooling rail - 2x used lower tooling rails (25 + 10 mm) - 1x movable twin foot pedal - Original operating manual

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 130 h, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 1.920 mm, moč: 55 kW (74,78 KM), dolžina vilic: 1.200 mm, lastna masa: 4.710 kg, skupna dolžina: 3.894 mm, vrsta pogona: Diesel, gradbena širina: 1.813 mm, Rigid telescopic handler Ihodpfeww N Npex Af Tjt Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: New Front tyres type: Pneumatic Front tyres size: 12 R Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 12 R Rear tyres condition: 80 - 100% Description: The MT 625 H telehandler is designed for construction site operations in new build projects and for renovation work on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily fits through doorways and can manoeuvre efficiently on congested sites. Its turning radius of 3.30 m and the availability of 3 steering modes provide excellent manoeuvrability. This telehandler is easy to operate and is equipped with an ergonomic dashboard and JSM joystick for simple and precise handling. The MT 625 H offers a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables speeds up to 25 km/h. Maintenance is facilitated by the large engine hood opening. The 90 l gear pump allows for simultaneous boom and telescopic movements, resulting in increased productivity. 3rd hydraulic valve, full cab, CE certificate,

Stanje: rabljeno, Leto izdelave: 2000, Drilling capacity in steel (diameter): 50 mm Throat depth: 365 mm Drilling stroke: 230 mm Spindle diameter: 60 mm Spindle taper: MT 4 Spindle speeds: 54 – 1,032 rpm Number of speed steps: 9 Table clamping surface: 620 x 520 mm Total power requirement: 3.5 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.2 x 0.8 x 2.45 m Column drilling machine equipped with: - Forward/reverse operation - Machine lamp - Coolant system Isdpsv Ehd Nefx Af Teht - Emergency stop device

Stanje: rabljeno, Leto izdelave: 2024, skupna dolžina: 7.060 mm, · Working height 16.21 m · Ground clearance (access) 0.38 m · Platform height 14.21 m · Maximum lateral outreach 8.52 m · Up-and-over clearance / Articulation point 7.59 m · Basket arm rotation angle (up / down) +66.50° / -65.80° · Work platform load capacity Q 408 kg Isdpfjxd Eldox Af Tjht · Upper structure rotation 350° · Work basket rotation (right / left) 90° / 90° · Persons allowed (indoors / outdoors) 3 / 3 · Inside turning radius 1.28 m · Outside turning radius 4.09 m · Travel speed – transport mode 5 km/h · Travel speed – work mode 1 km/h · Gradeability 45% · Permissible tilt in work mode 5° · Tyres foam-filled · Tyre dimensions 914 x 370 mm · Drive wheels (front / rear) 2 / 2 · Steered wheels (front / rear) 2 / 2 · Braked wheels / axles 0 / 2 · Manufacturer / engine model Kubota - D1105-E4B · Engine emission standard Stage V · Rated engine output / power 24.80 Hp / 18.50 kW · Ground pressure 11.50 dan/cm² · Hydraulic pressure 340 bar · Hydraulic tank capacity 53 l · Fuel tank capacity 51 l · Ambient noise (LwA) < 105 dB · Hand-arm vibration < 0.50 m/s² · Average daily fuel consumption 7 l · Environmentally harmful NOx 5.80 kg

Stanje: rabljeno, Leto izdelave: 2004, Drilling capacity in steel (diameter): 32 mm Throat depth: 300 mm Drilling stroke: 150 mm Spindle taper: MK 4 Table size: 480 x 480 mm Spindle feed range: 0.1 - 0.2 mm/rev Thread cutting capacity: M 22 (St 60) Drilling capacity in cast iron: 35 mm Spindle speeds – stepless: 80–1170 rpm Total power requirement: 2.3 kW Machine weight approx.: 350 kg Space requirement approx.: 800 x 1000 x 2000 mm Accessories: - Automatic feed - Coolant device integrated into the base - Automatic thread cutting reversal - Stepless speed adjustment Ihodowz Rvfjpfx Af Tet - Machine lamp - Spindle guard

Stanje: novo, Blechbreite 2035 mm Blechstärke 4,5 mm ST Blechstärke bei Niro-Stahl 3,0 mm VA Biegewinkel max. 0 - 135 ° Öffnungsweite 100 mm Hinteranschlag - verstellbar 70 - 600 mm Gesamtleistungsbedarf 5,5 kW Maschinengewicht ca. 4145 kg Raumbedarf ca. 3300 x 1550 x 1900 mm Beschreibung. - Vollständig gehärtete Struktur - BEIJER 7” Touchscreen-Steuerung * Software mit 40 Programmen und bis zu 50 Schritten * 7-Zoll-Touchscreen im Seitenständer integriert - Mit manuellem, von hinten verstellbarem Hinteranschlag - Elektronische Komponenten sind Qualitätsbauteile von SCHNEIDER - Elektrischer Schaltschrank ist im Seitenständer integriert - Anpassung des hydraulischen Drucks an die Materialstärke - Einstellung der Materialstärke an der Biegewange erfolgt einfach mit einer mm-Skala - Griff zur Einstellung der Materialstärke an der Oberwange ist im Seitenständer versteckt Ihjdexaaahspfx Af Tot - Segmentierte Oberwange

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 23.500 kg, vrsta goriva: dizel, barva: siv, moč: 1.672 kW (2.273,28 KM), Izhodni tok: 3.850 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 1.600 kW (2.175,39 KM), nazivna (navidezna) moč: 2.000 kVA, neprekinjena moč: 1.600 kW (2.175,39 KM), neprekinjena (navidezna) moč: 2.090 kVA, skupna dolžina: 12.090 mm, skupna širina: 2.440 mm, skupna višina: 2.890 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Mitsubishi, vrsta hlajenja: voda, Mitsubishi-Stamford Container Generator Set – 2090 kVA – Mitsubishi S16R-PTA2 – Stamford S7L1D-F41 – Available Immediately from Stock Technical Specifications Engine: Mitsubishi S16R-PTA2 – Industrial engine, developed in Japan and manufactured in France; 65.37 L V16, turbocharged with mechanical fuel system for economical operation, easy inspection, and serviceability. Generator: Stamford S7L1D-F41 – High-performance generator with Airflow and PMG excitation technology, part of the S7 series (1550–2500 kVA at 400 V, 50 Hz). Rated Output: 2090 kVA at 50 Hz, 230/400 V Container: 40 ft High Cube, robust and insulated, with integrated drip tray, exhaust system, fuel tank, and starter battery. Weight and Dimensions: approx. 23,500 kg Operating Hours: 0 hours Control and Protection System COMAP InteliGen 1000 controller with InteliVision display. Grid-parallel functionality with automatic synchronisation, load and reactive power sharing, load shedding. Peak Shaving: Reduces grid draw during peak demand through intelligent generator management. Fully compliant with grid connection standards (EN 50549, IEEE 1547), redundant CAN-bus/HMI support, and hot-swap capability. Areas of Application Designed for demanding industrial environments, emergency power, and critical infrastructure, including data centres, commercial, and municipal buildings. Benefits & Extras Immediately available from stock in Apeldoorn Warranty: 1,000 hours or 1 year, including rapid service, replacement units, and 24/7 support Fully prepared for fast deployment: container, drip tray, exhaust system, and switchgear cabinet are fitted as standard. Business Relevance Ideal for backup power in data centres, hospitals, or production processes where continuous power supply is essential. Perfect for grid-parallel applications for load management and peak load limitation. Easy integration thanks to advanced COMAP control and standard interfaces. Contact & Delivery Information Isdpfxswgvrcj Af Toht Advice? Quotation? Request technical datasheet or test report – contact our sales team. This containerised generator set is available for immediate viewing and delivery from our site in Apeldoorn.