Gozdarski stroj

Rapid 430 + Lipco ME104-LZ

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The Brugger PX130 wood chipper is powered via the tractor's PTO and is capable of processing logs with a diameter of up to 13 cm. Its robust construction and high-quality materials ensure reliable performance. Technical specifications: - Hydraulic feed - Diameter up to 13 cm - Weight: 420 kg - PTO speed: 540 rpm - Required tractor power: 30–70 HP Fpsdpfx Aorblwdsflsb Equipped with hydraulic feed, it offers an efficient solution for wood processing in various agricultural and forestry applications. Contact us for a customised quotation!

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Fpsdpfev Sqrpsx Afleb Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11470, širina obdelovanca (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours and has been professionally dismantled and stored in a heated hall. Fpodswhpavopfx Aflsb

Stanje: rabljeno, številka stroja/vozila: WHLT2350100029458, Leto izdelave: 2021, Nosilnost: 2.770 kg Dovoljena skupna masa: 730 kg DDV/obdavčitev po razliki: DDV odbiten Stanje pnevmatik spredaj: 100 Fpsdpfx Afotr H Nvelsb Stanje pnevmatik zadaj: 100 Pnevmatike spredaj: - Pnevmatike zadaj: - Za dodatne informacije se obrnite na skupino PFEIFER.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, obratovalne ure: 33 h, številka stroja/vozila: CAT00D7GLC7G01263, RABLJEN BULDŽER CATERPILLAR Z RIPERJEM MODEL: D7G SERJSKA ŠTEVILKA: CAT00D7GLC7G01263 Fjdpfxov Dr S Uo Aflspb DELOVNIH UR: 33 LETO IZDELAVE: 2009

Stanje: zelo dobro (rabljeno), Standardni parni kotel 2000 kg/h 22 bar (2166) oljni ali plinski gorilnik Fjdpexqr E Djfx Afljpb

Stanje: rabljeno, Leto izdelave: 1974, Za dodatne informacije se obrnite na ATS Norway. Prosimo, navedite referenčno številko pri povpraševanju: 17647 Specifikacije: Model: približno 1974 Maksimalna nosilnost: 4.000 kg Počeno okno Stanje pnevmatik: Glejte slike Nastavljiv stolp Rotorska luč Začne in deluje Fpsdpfx Aswph Uzofleb Opis: Tovornjak je delujoč, zažene se in deluje po pričakovanjih, vendar so potrebni nekateri vzdrževalni in obratovalni stroški. Stolp je mogoče nastavljati poleg standardnega dviga in spuščanja. Največja dvižna zmogljivost je 4 tone. Možna je hitra dostava. Lastna teža: 1 Model: motveni viličar

Stanje: rabljeno, Leto izdelave: 2018, No. 10027 Single-Shaft Shredder / Granulator AMIS / WEIMA WT 15 Used, Year of manufacture: 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be inspected and tested on site. Single-shaft shredder for cables, plastics & recycling applications Infeed opening: 1500 x 1160 mm (LxW) Rotor width: 1500 mm Rotor diameter: 368 mm Rotor speed: approx. 90 rpm Motor power: 90 kW System output: 99 kW Current consumption: 210 A Voltage: 400 V / 50 Hz PLC control: Siemens SIMATIC The high-performance shredder from the WT Series is ideally suited for processing a wide range of plastics, especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams, and all loose, non-bulky residual materials. The WING-RAM pusher ensures safe material feed, even for contaminated or moist material. Includes: - Angled discharge conveyor / outfeed conveyor AMIS FB 7000 x 1500 x 580 / Year 2018 / 1.5 kW - Magnetic separator AMIS Installation dimensions: approx. 9000 x 3500 x 3950 mm (LxWxH) Transport dimensions (single-shaft shredder): approx. 3000 x 2700 x 3200 mm (LxWxH) Weight: approx. 12,500 kg Sale by order of customer, ex-site near 69123 Heidelberg, without dismantling, transport, or installation Dismantling, transport, and loading by us available on request (optional) Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection is recommended and possible by arrangement Sale as is / as inspected Fpsdpsxwdiusfx Afleb Technical data, description of condition, year of manufacture, and scope of supply according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machinery, any warranty is excluded; the following applies: “purchased as inspected” Pictures and videos are for reference only and may not represent the actual scope of supply Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex location

Stanje: rabljeno, prevoženi kilometri: 550.000 km, moč: 368 kW (500,34 KM), prva registracija: 05/2010, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 5, dolžina tovornega prostora: 8.500 mm, Oprema: klimatska naprava, parkirni grelec, * Iveco AS320S50X transporter za gradbene stroje, 4 osi * Prva registracija 2010 * 550.000 km * Euro 5 * Motor Cursor C13 * 500 KM * Listno-zračna vzmetenja * 8x2 pogon osi * 2. os dvižna os * 4. os vodilna dvižna os * Klimatska naprava * Retarder * Dodatno ogrevanje * Pogonska gred (PTO) * Avtomatski menjalnik Fjdpfx Afexyca Relepb * Hidravlična rampa * Rezervoar za vodo * Nakladalna površina: 8,50 m * Medosna razdalja: 6,10 m * 1.-2. os: 4,65 m * 1.-4. os: 7,50 m * Lastna teža: 14.150 kg * Skupna teža: 32.000 kg * Nosilnost: 17.850 kg

Stanje: rabljeno, Gear motor, 8.5/1.4 kW, angular drive, coupling, brake hoist motor Drive electric motor, 8.5/1.4 kW, rev. 9-54 angular drive Lifting motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8.5/1.4 kW Drive torque: 1114 Nm Fodjud H Daspfx Aflopb Speed: 9-54 rpm Angular drive, coupling, brake gearbox Several units available from stock.