Stebrni vrtalnik

REFORM SB50

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Hjdpfxegf H Saj Af Tefb Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights Hodofqpxispfx Af Tjfb - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: rabljeno, Technical Details: Ram stroke - max.: 250 mm Hfedpfsw Au I Iox Af Teb Workpiece diameter - max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Various accessories

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Hfodpfx Afju R S Hps Tsb Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 0125153, Offer 24280 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling performance in steel ST 60: 40 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 175 mm - Drill spindle speeds, infinitely variable: 60 – 1,600 rpm - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat depth: 290 mm Hfjdpfx Afst Hr Sve Tob - Max distance drill spindle – table / base plate: 790 / 1,210 mm - Table with 2 T-slots: 570 x 475 mm - Height adjustable via rack-and-pinion with hand crank - Drive: 400 V / 1.1 / 1.8 kW - Required space approx.: W 600 x H 1,950 x D 980 mm - Weight approx.: 450 kg - Equipped with: - Emergency stop button - Work light - Machine vice - 15 pieces HSS drill bits 8 to 20 mm

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm Hfedpfx Aenzpx Ref Tsb -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg Hfedpfxjt Iklke Af Teb

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Hodsu Ixznjpfx Af Tofb Steel faceplate Ø 705 mm with offset threaded holes

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Hfedpfjtt Nd Rox Af Tjb Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Hjdpot U Rm Isfx Af Tefb Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev